Density and Young׳s Modulus of ternary glasses close to the eutectic composition in the CaO–Al2O3–SiO2-system
Source abstract
Abstract
Abstract The elastic properties and the density of ternary glass forming systems within the CaO–SiO 2 –Al 2 O 3 -system (CAS) were evaluated. Different glass compositions near the lowest eutectic (1170 °C) composition within the CaO–Al 2 O 3 –SiO 2 -system have been melted from pure raw materials. Their target compositions differed not more than 4 wt% for each component. Exact chemical compositions were measured by x-ray fluorescence. The density, and acoustic properties were determined and the Young׳s Moduli were derived herefrom. It was of special interest to obtain information on these properties and their dependencies upon small variations in the composition. The density values were between 2.600 and 2.667 g cm −3 and the packing density factors V p of the oxides glasses using the ionic radii of Pauling were in the range from 0.559 to 0.571. The determined data were compared to different model calculations. Density model calculations show relative deviations between 2 and 6%. The values calculated from the model for Young׳s Modulus by Makishima and Mackenzie (1973) [1] were somewhat smaller than the measured ones. The correction by Rocherulle et al. (1989) [3] of the Makishima model showed better agreement with the measured values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Glass properties and applications · Metallic Glasses and Amorphous Alloys · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Direct calculation of Young׳s modulus of glass10.1016/0022-3093(73)90053-7 ↗
2. Calculation of bulk modulus, shear modulus and Poisson׳s ratio of glass10.1016/0022-3093(75)90047-2 ↗
3. Elastic moduli of oxynitride glasses10.1016/0022-3093(89)90582-6 ↗
4. Liquidus surface of MgO–CaO–Al2O3–SiO2 glass-forming systems10.1016/j.jnoncrysol.2012.12.020 ↗
5. The ternary system CaO–Al2O3–SiO2
6. The liquidus temperature; its critical role in glass manufacturing10.1111/j.2041-1294.2010.00015.x ↗
7. Design of Energy Friendly Glass Fibers, Fiberglass and Glass Technology
8. Das Zustandsdiagramm Al2O3–CaO–MgO–SiO2 in poly thermischer darstellung
9. ASTM D578 · 2013
10. The anorthite–diopside system: structural and devitrification study. Part II: Crystallinity analysis by the Rietveld–RIR method10.1111/j.1551-2916.2005.00578.x ↗
11. N. Bilek, W. Porcham, M. Schlamadinger, G. Sprachmann, Glass based on silicon oxide and calcium oxide, 25.01.1995, EP0635461 (A1).
12. An ESCA study of the bridging to non-bridging oxygen ratio in sodium silicate glass and the correlations to glass density and refractive index
13. Structural and acoustic properties of lead silicate glasses doped with alkali and alkaline earth oxides
14. On the mechanical properties of lead borate glass10.1016/j.jnoncrysol.2013.09.015 ↗
15. Composition dependence of elasticity in aluminosilicate glasses10.1007/s00269-006-0084-z ↗
16. Al and Si coordination in SiO2–Al2O3 glasses and liquids: a study by NMR and IR spectroscopy and MD simulations10.1016/0009-2541(92)90063-B ↗
17. Mysen · 2005
18. Shelby · 2005
19. The distribution of aluminum in the tetrahedra of silicates and aluminates
20. Elastic moduli of low-silica calcium alumino-silicate glasses10.1016/S0254-0584(02)00331-0 ↗
21. Young׳s modulus, Vickers hardness and indentation fracture toughness of alumino silicate glasses10.1016/j.ceramint.2015.01.144 ↗
22. Elastic moduli of calcium alumino-silicate glasses studied by Brillouin scattering10.1016/S0025-5408(00)00317-2 ↗
23. Effect of TeO2 on the elastic moduli of sodium borate glasses10.1016/j.physb.2004.02.001 ↗
24. Dependence of Young׳s modulus on volume and structure in alkali silicate and alkali aluminosilicate glasses10.1111/j.1151-2916.1984.tb18845.x ↗
25. General method for calculating the properties of oxide glasses and glass forming melts from their composition and temperature
26. On the elastic constants and structure of the pure inorganic oxide glasses10.1002/pssa.2210770231 ↗
27. Young’s modulus and compositional parameters of oxide glasses10.1111/j.1151-2916.1999.tb02272.x ↗
28. Empirical equation for calculating the density of oxide glasses10.1111/j.1551-2916.2009.03363.x ↗
29. Global model for calculating room-temperature glass density from the composition10.1111/j.1551-2916.2007.01751.x ↗
30. Estimating the physical properties of slags
31. M.D.L. Sciglass® SciGlass, version 6·6, MDL Information Systems, Inc. San Leandro, 2006
32. Allibert · 1995
33. Vogel · 1994
34. ASTM C693-93 · 2013
35. Comparison of density measurement techniques for additive manufactured metallic parts10.1108/13552541111156504 ↗
36. Krautkrämer · 1969
37. Elastic properties of reinforces solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗
38. Density–structure correlations in Na2O–Al2O3–SiO2 glasses10.1016/S0022-3093(98)00719-4 ↗
39. Correlation between radiative transition probabilities of Nd3+ and composition in silicate, borate, and phosphate glasses10.1111/j.1151-2916.1993.tb06612.x ↗
40. Pauling · 1960
41. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
42. Scholze · 1988
43. Mechanical and structural studies on sodium borosilicate glasses doped with Er2O3 using ultrasonic velocity and FTIR spectroscopy10.1016/j.physb.2006.06.132 ↗
44. Volf · 1988 · 9
45. Poisson׳s ratio and modern materials10.1038/nmat3134 ↗
46. Elastic properties in materials10.1111/j.1551-2916.2007.01945.x ↗
47. Molecular dynamics study of the structural properties of calcium aluminosilicate slags with varying Al2O3/SiO2 ratios10.2355/isijinternational.52.342 ↗
48. CRC Handbook of Chemistry and Physics
49. Fundamental condition of glass formation10.1111/j.1151-2916.1947.tb19654.x ↗