Thermodynamic corrosion behavior of Al2O3, ZrO2 and MgO refractories in contact with high basicity refining slag
Source abstract
Abstract
Abstract Al 2 O 3 , MgO, and ZrO 2 containing refractories are widely used in the steel industry. The corrosion behavior of high basicity refining slag on three kinds of refractory materials was studied. Regarding the Al 2 O 3 refractory, Al 2 O 3 crucible would partially dissolve into the slag, and form a transition layer composed of CaAl 12 O 19 and CaAl 4 O 7 at the same time. For ZrO 2 refractories, the refining slag and the ZrO 2 crucible produce a transition layer composed of calcium zirconate with the high melting point of CaZrO 3 , CaZr 4 O 9 and Ca 6 Zr 19 O 44 , which prevents the contact between the ZrO 2 crucible and the refining slag to inhibit the further corrosion of the crucible. There is no chemical reaction between the MgO crucible and the refining slag. However, the pores in the MgO crucible matrix are filled with liquid slag. The corrosion mechanisms were studied by experiments combined with thermodynamic calculations, and the relative corrosion model has been established.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Materials Engineering and Processing · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Study on foaming behavior of molten slag during smelting reduction with iron bath
2. Solid state chemistry of alumina-chromia-magnesia and related refractories10.1007/BF00626504 ↗
3. Dissolution behavior of zirconia-refractories during continuous casting of steel10.1007/BF03027711 ↗
4. FactSage thermodynamic database for steelmaking refractory research
5. Microstructural evolution of magnesia based constables containing micro silica10.1016/j.ceramint.2012.03.070 ↗
6. Fundamental investigations on the corrosion of ZrO2–C refractories during interaction with a casting mould meniscus slag10.1002/srin.201300336 ↗
7. Towards CFD modelling of slag entrainment in gas stirred ladles10.1002/srin.201400373 ↗
8. The corrosion of Mg-partially stabilized zirconia during service in continuous casting tundish
9. Dissolution kinetics of alumina into mold fluxes for continuous steel casting10.2355/isijinternational.45.1856 ↗
10. Dissolution rate of Al2O3 into molten CaO-SiO2-Al2O3 slags10.2355/isijinternational.42.852 ↗
11. Dissolution of alumina in mold fluxes10.1007/s11663-997-0094-3 ↗
12. Diffusional dissolution of alumina in various steelmaking slags10.2355/isijinternational.44.229 ↗
13. Comparative evaluation investigation of slag corrosion on Al2O3 and MgO-Al2O3 refractories via experiments and thermodynamic simulations10.1016/j.ceramint.2017.09.034 ↗
14. Cramb In-situ observations of clean steel phenomenon
15. Dynamic interaction of refractory and molten steel: effect of alumina-magnesia castables on alloy steel cleanness10.1016/j.ceramint.2018.08.327 ↗
16. Dynamic slag/refractory interaction of lightweight Al2O3–MgO castable for refining ladle10.1016/j.ceramint.2015.03.026 ↗
17. Corrosion mechanisms of low porosity ZrO2 based materials during near net shape steel casting10.1016/S0955-2219(99)00149-1 ↗
18. Comparison of the high-temperature corrosion of aluminum nitride, alumina, magnesia and zirconia ceramics by coal ashes10.1016/j.ceramint.2015.02.052 ↗
19. Corrosion resistance mechanism of MgO-ZrO2 brick in RH degasser slag
20. Reaction mechanism of MgO–ZrO2 refractory with CaO–SiO2–Al2O3–FetO slag
21. Effect of the glass composition on corrosion of zirconium-containing refractories in a glass-melting furnace (a review)10.1007/s10717-007-0084-6 ↗
22. Degradation mechanisms of magnesia-carbon refractories by high alumina stainless steel slags under vacuum10.1016/j.ceramint.2006.03.009 ↗
23. Dissolution rate and mechanism of solid MgO particles in synthetic ladle slags10.1016/j.jnoncrysol.2012.02.014 ↗
24. Reactions between MgO-C refractory, molten slag and metal10.2355/isijinternational.40.Suppl_S101 ↗
25. Dissolution behaviour of MgO based refractories in CaO–Al2O3–SiO2 slag10.1179/1743281215Y.0000000003 ↗
26. Melt corrosion of oxide and oxide–carbon refractories10.1179/095066099101528234 ↗
27. In situ observation of the direct and indirect dissolution of MgO particles in CaO–Al2O3–SiO2-based slags10.1016/j.jeurceramsoc.2006.05.107 ↗
28. Effects of additives and temperature on the dissolution rate and diffusivity of MgO in CaO–Al2O3 slags under forced convection10.2355/isijinternational.46.1554 ↗
29. Corrosion behavior of MgO–C refractory in ferromanganese slags10.2355/isijinternational.52.62 ↗
30. Corrosion of magnesia–chrome brick in molten MgO–Al2O3–SiO2–CaO–FetO slag10.1016/j.matchemphys.2008.02.001 ↗
31. Corrosion of spinel clinker by CaO–Al2O3–SiO2 ladle slag10.1016/S0955-2219(01)00509-X ↗
32. Basic slag attack of spinel-containing refractory castables10.1016/j.ceramint.2011.02.007 ↗
33. Effect of slag basicity adjusting on inclusions in tire cord steels during ladle furnace refining process10.1051/metal/2017065 ↗
34. Influence of grain phase on slag corrosion of low-cement castable refractories10.1111/j.1151-2916.2001.tb00672.x ↗
35. The development of a thermodynamic model for Al2O3–MgO refractory castable corrosion by secondary metallurgy steel ladle slags10.1016/j.ceramint.2008.04.002 ↗
36. Slag attack evaluation of in situ spinel-containing refractory castables via experimental tests and thermodynamic simulations10.1016/j.ceramint.2011.09.033 ↗