Effect of milling parameters on the formation of nanocrystalline hydroxyapatite using different raw materials
Source abstract
Abstract
Abstract The influence of milling parameters (time and atmosphere) on the mechanochemical synthesis of nanocrystalline hydroxyapatite (n-HAp) using different raw materials was studied. Two distinct chemical reactions were activated for various milling times under air or in a high purity argon (99.998 vol%) atmosphere. Then, the mechanically activated powder was heat treated at 800 °C for 1 h to produce n-HAp with high degree of crystallinity. Results revealed that the phase purity of products under both milling atmospheres was strongly influenced by the chemical composition of raw materials. The synthesized powders exhibited average sizes about 32 and 27 nm under air atmosphere, and about 32 and 34 nm under argon atmosphere. The fraction of crystalline phase drastically decreased after 80 h of milling under both atmospheres. In addition, the fraction of crystalline phase for the annealed sample at 800 °C was higher than the mechanosynthesized specimens. The results of morphological evaluation confirmed the formation of n-HAp with different morphologies each of which can be used for particular purpose.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Advanced materials and composites · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Electrospun hydroxyapatite fibers from a simple sol–gel system10.1016/j.matlet.2011.09.090 ↗
2. Polymeric micelle-templated synthesis of hydroxyapatite hollow nanoparticles for a drug delivery system10.1016/j.actbio.2009.12.014 ↗
3. Combination of porous hydroxyapatite and cationic liposomes as a vector for BMP-2 gene therapy10.1016/j.biomaterials.2003.11.038 ↗
4. Discoloration of ceramic hydroxyapatite used for protein chromatography10.1016/S0021-9673(00)00626-9 ↗
5. Apatite as an interesting seed to remove phosphorus from waste-water in constructed wetlands10.2166/wst.2005.0318 ↗
6. Effect of processing conditions on the formation of hydroxyapatite nanoparticles10.1016/j.powtec.2011.11.049 ↗
7. Synthesis of nanoscale hydroxyapatite particles using triton X-100 as an organic modifier10.1016/j.ceramint.2012.06.090 ↗
8. Preparation and bioactivity evaluation of bone-like hydroxyapatite nanopowder10.1016/j.jmatprotec.2007.10.004 ↗
9. Crystallization and sintering characteristics of chemically precipitated hydroxyapatite nanopowder10.1016/j.jcrysgro.2003.10.001 ↗
10. Synthesis of nanocrystalline hydroxyapatite using surfactant template systems: role of templates in controlling morphology10.1016/j.msec.2009.05.019 ↗
11. Hydroxyapatite nanopowders: synthesis, densification and cell–materials interaction10.1016/j.msec.2006.07.010 ↗
12. Nanocrystalline calcium phosphate ceramics in biomedical engineering10.1016/j.msec.2006.05.018 ↗
13. Properties of hydroxyapatite produced by annealing of bovine bone10.1016/j.ceramint.2006.04.001 ↗
14. A thorough physicochemical characterisation of 14 calcium phosphate-based bone substitution materials in comparison to natural bone10.1016/S0142-9612(03)00621-5 ↗
15. Constitutive modeling of the densification and the grain growth of hydroxyapatite ceramics10.1016/j.biomaterials.2004.05.027 ↗
16. Synthesis of hydroxyapatite via mechanochemical treatment10.1016/S0142-9612(01)00229-0 ↗
17. Formation mechanism of nano-sized hydroxyapatite powders through spray pyrolysis of a calcium phosphate solution containing polyethylene glycol10.1016/j.jeurceramsoc.2012.08.029 ↗
18. Milling media effects on synthesis, morphology and structural characteristics of single crystal hydroxyapatite nanoparticles10.1179/174367509X12447975734230 ↗
19. Synthesis of calcium phosphate-based composite nanopowders by mechanochemical process and subsequent thermal treatment10.1016/j.ceramint.2012.05.064 ↗
20. Electrochemical properties of nanocrystalline TiO2 synthesized via mechanochemical reaction10.1016/j.electacta.2012.04.092 ↗
21. Mechanochemical synthesis of hydrogen storage materials10.1016/j.pmatsci.2012.07.001 ↗
22. Structural properties of hydroxyapatite obtained by mechanosynthesis10.1016/S1293-2558(03)00035-9 ↗
23. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
24. Synthesis of nanosize single-crystal hydroxyapatite via mechanochemical method10.1016/j.matlet.2008.11.030 ↗
25. Synthesis and characterization of fluorapatite–titania (FAp–TiO2) nanocomposite via mechanochemical process10.1016/j.solidstatesciences.2010.07.017 ↗
26. The effect of high-energy ball milling parameters on the preparation and characterization of fluorapatite nanocrystalline powder10.1016/j.ceramint.2009.01.012 ↗
27. Variation in crystallinity of hydroxyapatite and the related calcium phosphates by mechanical grinding and subsequent heat treatment10.1007/s11661-002-0114-5 ↗
28. B. Nasiri-Tabrizi, A. Fahami, Synthesis and characterization of fluorapatite–zirconia composite nanopowders, Ceramics International, 10.1016/j.ceramint.2012.11.016, in press10.1016/j.ceramint.2012.11.016 ↗
29. Synthesis and characterization of mechanical-alloyed TixMg alloys10.1016/S0925-8388(01)02027-8 ↗
30. Fabrication, chemical composition change and phase evolution of biomorphic hydroxyapatite10.1007/s10856-008-3475-5 ↗
31. Reactions in hydroxylapatite–zirconia composites10.1016/j.ceramint.2006.02.012 ↗
32. Densification behavior and mechanisms of synthetic hydroxyapatites10.1016/S0955-2219(00)00154-0 ↗
33. XRD and electrochemical investigation of particle size effects in platinum–cobalt cathode electrocatalysts for oxygen reduction10.1016/j.jallcom.2010.04.018 ↗
34. Influence of process conditions on hydroxyapatite crystallinity obtained by direct crystallization10.1590/S1516-14391999000200003 ↗
35. Synthesis of nano hydroxyapatite powder that simulate teeth particle morphology and composition10.1016/j.cap.2009.03.024 ↗
36. Preparation of nano-hydroxyapatite particles with different morphology and their response to highly malignant melanoma cells in vitro10.1016/j.apsusc.2008.06.114 ↗
37. Coalescence kinetics of unequal sized nanoparticles10.1016/j.jaerosci.2005.02.007 ↗
38. Mechanochemical transformation of mixtures of Ca(OH)2 and (NH4)2HPO4 or P2O510.1016/j.materresbull.2006.03.004 ↗
39. Mechanical alloying synthesis and bioactivity evaluation of nanocrystalline fluoridated hydroxyapatite10.1016/j.jcrysgro.2008.11.100 ↗