Cutting performance and tool wear of SiAlON and TiC-whisker-reinforced Si3N4 ceramic tools in side milling Inconel 718
Source abstract
Abstract
Abstract Cutting performance and tool wear of two ceramic tools, SiAlON and TiC-whisker-reinforced Si3N4, in the side milling processes of Inconel 718 are evaluated in comparison, including cutting force, temperature, surface morphology, tool wear and corresponding mechanism. Results show that these two ceramic tools has advantages and disadvantages respectively, due to the properties of ceramic matrixes and the evolutions of build-up edges. SiAlON ceramic tool has better resistance to wear, but causes poor surface quality. TiC-whisker-reinforced Si3N4 ceramic tool generates better surface quality, but bears severe wear. Brittle damage, as the main mode of wear, occurs to both ceramic tools in different formations. SiAlON ceramic tool is featured by crater-like damage on blades while TiC-whisker-reinforced Si3N4 ceramic tool is featured by whole-layer damage on flank faces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Future research directions in the machining of Inconel 718
2. Advancements in material removal mechanism and surface integrity of high speed metal cutting: a review10.1016/j.ijmachtools.2021.103744 ↗
3. Machining induced surface integrity in titanium and nickel alloys: a review10.1016/j.ijmachtools.2010.11.003 ↗
4. State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: a review10.1016/j.measurement.2018.09.045 ↗
5. A comprehensive study on the effects of tool wear on surface roughness, dimensional integrity and residual stress in turning IN718 hard-to-machine alloy10.1016/j.jmapro.2017.09.016 ↗
6. Surface integrity in metal machining - Part I: fundamentals of surface characteristics and formation mechanisms10.1016/j.ijmachtools.2020.103687 ↗
7. Machinability of nickel-based high temperature alloys10.1080/10940340008945703 ↗
8. C.B. Carter, M.G. Norton, Ceramic Materials: Science and Engineering, Springer Science & Business Media2007.
9. J.b.c. Org
10. An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools10.1016/j.jmatprotec.2011.09.022 ↗
11. Tiwari · 2016
12. High temperature mechanical properties of Al2O3/TiC micro–nano-composite ceramic tool materials10.1016/j.ceramint.2013.04.081 ↗
13. Astakhov · 2012 · 1
14. Davim · 2013
15. High temperature solid-lubricating materials: a review10.1016/j.triboint.2018.12.037 ↗
16. G. Zheng, J. Zhao, Chapter 2 - performance of Sialon/Si3N4 graded ceramic tools at high speed machining, in: K. Gupta, J. Paulo Davim (Eds.) High Speed Machining, Academic Press2020, pp. 27-62.10.1016/B978-0-12-815020-7.00002-3 ↗
17. Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology10.1016/j.jmatprotec.2008.01.018 ↗
18. Cutting performance and failure mechanisms of an Al2O3/WC/TiC micro- nano-composite ceramic tool10.1016/j.ijrmhm.2009.11.007 ↗
19. Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation10.1007/s41660-017-0019-9 ↗
20. Analysis of subsurface microstructure and residual stresses in machined inconel 718 with PCBN and Al2O3-SiCw tools10.1016/j.procir.2014.04.026 ↗
21. Study on turning performance of PVD TiN coated Al2O3+TiCN ceramic tool under cutting fluid reinforced by nano-sized solid particles10.1016/j.jmapro.2020.05.017 ↗
22. Cutting performance and wear mechanism of honeycomb ceramic tools in interrupted cutting of nickel-based superalloys10.1016/j.ceramint.2021.03.123 ↗
23. Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQL10.1016/j.jmatprotec.2018.11.032 ↗
24. Suppression of notch wear of a whisker reinforced ceramic tool in air-jet-assisted high-speed machining of Inconel 71810.1016/j.precisioneng.2014.08.002 ↗
25. Crack propagation and wear estimation of ceramic tool in cutting inconel 718 based on discrete element method10.1016/j.triboint.2019.105998 ↗
26. Cutting performance, failure mechanisms and tribological properties of GNPs reinforced Al2O3/Ti(C,N) ceramic tool in high speed turning of Inconel 71810.1016/j.ceramint.2020.04.206 ↗
27. A critical review on self-lubricating ceramic-composite cutting tools10.1016/j.ceramint.2021.04.094 ↗
28. Wear behavior of solid SiAlON milling tools during high speed milling of Inconel 71810.1016/j.wear.2017.02.025 ↗
29. SiAlON based ceramic cutting tools10.1016/j.jeurceramsoc.2007.09.003 ↗
30. Effect of carbides on the microstructure and properties of Ti(C,N)-Based ceramics10.1111/j.1151-2916.1999.tb02216.x ↗
31. Tool wear characteristics in machining of nickel-based superalloys10.1016/j.ijmachtools.2012.08.001 ↗