Thermal barrier coatings with high-entropy oxide as a top coat
Source abstract
Abstract
Abstract A pyrochlore-structured La2(Zr0.2Ce0.2Hf0.2Sn0.2Ti0.2)2O7 high-entropy oxide was designed and synthesized, and its properties were tested. Traditional two-layer structured thermal barrier coatings (TBCs) with a La2(Zr0.2Ce0.2Hf0.2Sn0.2Ti0.2)2O7 top-coat were prepared by plasma spraying. A phase-pure defective-fluorite high-entropy-oxide top coat was thus obtained. The results confirmed the possibility of synthesizing pyrochlore-structured La2(Zr0.2Ce0.2Hf0.2Sn0.2Ti0.2)2O7. The material exhibited a low thermal conductivity, which increased with increasing temperature. The coefficient of thermal expansion (CTE) of La2(Zr0.2Ce0.2Sn0.2Hf0.2Ti0.2)2O7 ranged from 7.55 × 10−6 °C−1 to 8.63 × 10−6 °C−1 for the corresponding range of room temperature to 1000 °C. After 10 thermal cycles at 1050 °C, the La2(Zr0.2Ce0.2Hf0.2Sn0.2Ti0.2)2O7 top coat spalled in the TBC. Spallation did not occur at the interface between the bond coat and the thermally grown oxide layer, while it is in the top coat near the bond coat. Owing to the low fracture toughness and low CTE, the thermal cycling lifetime of TBCs with the La2(Zr0.2Ce0.2Hf0.2Sn0.2Ti0.2)2O7 top coat was short.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Effect of substrate rotation on the microstructure of 8YSZ thermal barrier coatings by EB-PVD
2. Modelling and evaluating thermal conductivity of porous thermal barrier coatings at elevated temperatures10.1016/j.ceramint.2020.04.228 ↗
3. Numerical prediction of thermal insulation performance and stress distribution of thermal barrier coatings coated on a turbine vane10.1016/j.ijthermalsci.2020.106552 ↗
4. Thermophysical properties and cyclic lifetime of plasma sprayed SrAl12O19 for thermal barrier coating applications10.1111/jace.17319 ↗
5. Effect of scandia content on the thermal shock behavior of SYSZ thermal sprayed barrier coatings10.1016/j.ceramint.2016.04.018 ↗
6. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and Outcomes10.1002/adem.200300567 ↗
7. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
8. Entropy-stabilized oxides10.1038/ncomms9485 ↗
9. A new class of high-entropy perovskite oxides10.1016/j.scriptamat.2017.08.040 ↗
10. Rare earth and transition metal based entropy stabilised perovskite type oxides10.1016/j.jeurceramsoc.2017.12.058 ↗
11. High entropy Sr((Zr0.94Y0.06)0.2Sn0.2Ti0.2Hf0.2Mn0.2)O3−x perovskite synthesis by reactive spark plasma sintering10.1080/21870764.2019.1595931 ↗
12. Defect structure and transport properties of (Co,Cr,Fe,Mn,Ni)3O4 spinelstructured high entropy oxide10.1016/j.jeurceramsoc.2019.10.026 ↗
13. Facile synthesis and ferrimagnetic property of spinel (CoCrFeMnNi)3O4 high-entropy oxide nanocrystalline powder10.1016/j.molstruc.2019.05.073 ↗
14. Formation and properties of high entropy oxides in Co-Cr-Fe-Mg-Mn-Ni-O system: novel (Cr,Fe,Mg,Mn,Ni)3O4 and (Co,Cr,Fe,Mg,Mn)3O4 high entropy spinels10.1016/j.jeurceramsoc.2019.11.030 ↗
15. Synthesis and microstructure of the (Co,Cr,Fe,Mn,Ni)3O4 high entropy oxide characterized by spinel structure10.1016/j.matlet.2017.12.148 ↗
16. From high-entropy ceramics to compositionally-complex ceramics: a case study of fluorite oxides10.1016/j.jeurceramsoc.2020.01.015 ↗
17. High-entropy fluorite oxides10.1016/j.jeurceramsoc.2018.04.010 ↗
18. Low temperature synthesis and characterization of single phase multi-component fluorite oxide nanoparticle sols10.1039/C9RA04636D ↗
19. La0.2Ce0.2Nd0.2Sm0.2Eu0.2)PO4: a high-entropy rare-earth phosphate monazite ceramic with low thermal conductivity and good compatibility with Al2O310.1016/j.jmst.2019.08.012 ↗
20. High entropy (Yb0.25Y0.25Lu0.25Er0.25)2SiO5 with strong anisotropy in thermal expansion10.1016/j.jmst.2019.07.022 ↗
21. High-entropy oxide phases with magnetoplumbite structure10.1016/j.ceramint.2019.03.221 ↗
22. Review of high entropy ceramics: design, synthesis, structure and properties10.1039/C9TA05698J ↗
23. A five-component entropy-stabilized fluorite oxide10.1016/j.jeurceramsoc.2018.04.063 ↗
24. An equimolar multicomponent or high entropy ceramic with good thermal stability and low thermal conductivity10.1016/j.jmst.2019.05.030 ↗
25. (Y0.25Yb0.25Er0.25Lu0.25)2(Zr0.5Hf0.5)2O7: a defective fluorite structured high entropy ceramic with low thermal conductivity and close thermal expansion coefficient to Al2O310.1016/j.jmst.2019.08.018 ↗
26. High-entropy environmental barrier coating for the ceramic matrix Composites10.1016/j.jeurceramsoc.2019.02.022 ↗
27. Multicomponent high-entropy zirconates with comprehensive properties for advanced thermal barrier coating10.1016/j.scriptamat.2019.12.006 ↗
28. Recent development of A2B2O7 system transparent ceramics10.1007/s40145-018-0287-z ↗
29. Synthesis and structures of high-entropy pyrochlore oxides10.1016/j.jeurceramsoc.2019.12.008 ↗
30. High-entropy pyrochlores with low thermal conductivity for thermal barrier coating materials10.1007/s40145-019-0342-4 ↗
31. La0.2Ce0.2Nd0.2Sm0.2Eu0.2)2Zr2O7: a novel high-entropy ceramic with low thermal conductivity and sluggish grain growth rate10.1016/j.jmst.2019.05.054 ↗
32. Preparation of (La0.2Nd0.2Sm0.2Gd0.2Yb0.2)2Zr2O7 high-entropy transparent ceramic using combustion synthesized nanopowder10.1016/j.jallcom.2019.153328 ↗
33. Preparation and phase evolution of high-entropy oxides A2B2O7 with multiple elements at A and B sites10.1016/j.jeurceramsoc.2021.01.013 ↗
34. High-entropy A2B2O7-type oxide ceramics: a potential immobilising matrix for high-level radioactive waste10.1016/j.jhazmat.2021.125596 ↗
35. New class of high-entropy defect fluorite oxides RE2(Ce0.2Zr0.2Hf0.2Sn0.2Ti0.2)2O7 (RE = Y, Ho, Er, or Yb) as promising thermal barrier coatings10.1016/j.jeurceramsoc.2021.05.044 ↗
36. Defect structure and transport properties in (Co,Cu,Mg,Ni,Zn)O high entropy oxide10.1016/j.jeurceramsoc.2019.06.018 ↗
37. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
38. The study on the laser cladding process and cracking of cast Ni-based superalloy K3
39. Tetragonality enhancement in BaTiO3 by mechanical activation of the starting BaCO3 and TiO2 powders: characterization of the contribution of the mechanical activation and postmilling calcination phenomena10.1111/ijac.13019 ↗
40. On the solid-state formation of BaTiO3 nanocrystals from mechanically activated BaCO3 and TiO2 powders: innovative mechanochemical processing, the mechanism involved, and phase and nanostructure evolutions10.1039/C5RA22942A ↗
41. Nanothickness films, nanostructured films, and nanocrystals of barium titanate obtained directly by a newly developed sol–gel synthesis pathway10.1007/s10854-014-2312-5 ↗
42. Analysis and characterization of phase evolution of Nanosized BaTiO3 powder synthesized through a chemically modified sol-gel process10.1007/s11661-012-1242-1 ↗
43. A mechanistic study of Nanoscale structure development, phase transition, morphology evolution, and growth of Ultrathin Barium titanate nanostructured Films10.1007/s11661-014-2352-8 ↗
44. Liu · 2019 · 34
45. High-entropy thermal Barrier coating of rare-earth Zirconate: a case study on (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7 prepared by Atmospheric plasma spraying10.1016/j.jeurceramsoc.2020.07.061 ↗