Comparison of microstructure and mechanical properties of plasma-sprayed nanostructured and conventional yttria stabilized zirconia thermal barrier coatings
Source abstract
Abstract
Abstract The main goal of this paper was to evaluate and compare the microstructure and mechanical properties of plasma-sprayed nanostructured and conventional yttria stabilized zirconia (YSZ) thermal barrier coatings (TBCs). To this end, NiCrAlY bond coat, nanostructured, and conventional YSZ coatings were deposited on Inconel 738LC substrate by atmospheric plasma spraying (APS). The mechanical properties of the coating were evaluated using nanoindentation and bonding strength tests. The microstructure and phase composition of the coating were characterized by field emission scanning electron microscopy (FESEM) and X-ray diffractometry (XRD). The nanostructured YSZ coating contained both nanosized particles retained from the powder and microcolumnar grains formed through the resolidification of the molten part of the powder, whereas the microstructure of the conventional YSZ coating consisted of columnar grain splats only. The phase composition of the as-sprayed nanostructured coating consisted of the non-transformable tetragonal phase, while the conventional coating showed the presence of both the monoclinic and non-transformable tetragonal phases. The results of nanoindentation and bonding strength tests indicated that the mechanical properties of the nanostructured coating were better than those of the conventional coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Comparative study on effect of oxide thickness on stress distribution of traditional and nanostructured zirconia coating systems10.1016/j.ceramint.2012.06.051 ↗
2. Effect of physical vapor deposited Al2O3 film on TGO growth in YSZ/CoNiCrAlY coatings10.1016/j.ceramint.2012.03.014 ↗
3. Evaluation of stress distribution and failure mechanism in lanthanum–titanium–aluminum oxides thermal barrier coatings
4. Heat treatment of nanostructured thermal barrier coating10.1016/j.ceramint.2006.03.022 ↗
5. Study of the high temperature oxidation performance of thermal barrier coatings with HVOF sprayed bond coat and incorporating a PVD ceramic interlayer10.1016/j.ceramint.2012.05.016 ↗
6. Thermal cyclic behavior of glass–ceramic bonded thermal barrier coating on nimonic alloy substrate10.1016/j.ceramint.2008.11.025 ↗
7. Thermal shock behavior of 8YSZ and double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings fabricated by atmospheric plasma spraying10.1016/j.ceramint.2011.12.076 ↗
8. Influence of original powders on the microstructure and properties of thermal barrier coatings deposited by supersonic atmospheric plasma spraying, part II: Properties10.1016/j.ceramint.2012.11.037 ↗
9. Comparison of thermal shock resistances of plasma-sprayed nanostructured and conventional yttria stabilized zirconia thermal barrier coatings10.1016/j.ceramint.2012.05.060 ↗
10. Influence of partial substitution of Sc2O3 with Gd2O3 on the phase stability and thermal conductivity of Sc2O3-doped ZrO210.1016/j.ceramint.2012.09.100 ↗
11. Thermal conductivity of thermal barrier coatings10.1016/S0921-5093(97)00846-0 ↗
12. Thermal cycling life and thermal diffusivity of a plasma-sprayed nanostructured thermal barrier coating10.1016/j.scriptamat.2004.07.024 ↗
13. A sintering model for thermal barrier coatings10.1016/j.actamat.2005.10.056 ↗
14. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
15. Delamination resistance of thermal barrier coatings containing embedded ductile layers10.1016/j.actamat.2011.12.039 ↗
16. Isothermal and cycle properties of EB-PVD yttria-partially stabilized zirconia thermal barrier coatings at 1150 and 1300°C10.1016/j.ceramint.2005.10.005 ↗
17. Gas turbine coatings: an overview10.1016/j.engfailanal.2012.07.007 ↗
18. High performance nanostructured ZrO2 based thermal barrier coatings deposited by high efficiency supersonic plasma spraying10.1016/j.apsusc.2011.03.092 ↗
19. Pawlowski · 2008
20. Mechanical properties of zirconia composite ceramics
21. Adhesion improvements of thermal barrier coatings with HVOF thermally sprayed bond coats10.1016/j.surfcoat.2006.10.005 ↗
22. Adhesion strength of ceramic top coat in thermal barrier coatings subjected to thermal cycles: effects of thermal cycle testing method and environment
23. Influence of pores on the surface microcompression mechanical response of thermal barrier coatings fabricated by atmospheric plasma spray: finite element simulation10.1016/j.apsusc.2010.09.081 ↗
24. Microstructural, corrosion and nanomechanical behaviour of ceramic coatings developed on magnesium AZ31 alloy by micro arc oxidation10.1016/j.ceramint.2012.10.020 ↗
25. Microstructure and indentation mechanical properties of plasma sprayed nano-bimodal and conventional ZrO2–8wt%Y2O3 thermal barrier coatings10.1016/j.vacuum.2011.10.029 ↗
26. Characterization of EB-PVD yttrium-stabilised zirconia by nanoindentation10.1016/j.surfcoat.2008.11.016 ↗
27. Enhanced ductility in thermally sprayed titania coating synthesized using a nanostructured feedstock10.1016/j.msea.2004.12.039 ↗
28. Microstructures and thermal insulation capability of plasma-sprayed nanostructured ceria stabilized zirconia coatings10.1016/j.surfcoat.2006.06.041 ↗
29. Thermal shock resistances of nanostructured and conventional zirconia coatings deposited by atmospheric plasma spraying10.1016/j.surfcoat.2004.08.225 ↗
30. Investigation of the thermomechanical properties of a plasma-sprayed nanostructured zirconia coating10.1016/S0955-2219(02)00345-X ↗
31. Thermal cyclic life and failure mechanism of nanostructured 13wt%Al2O3 doped YSZ coating prepared by atmospheric plasma spraying10.1016/j.ceramint.2011.11.077 ↗
32. Bose · 2007
33. Microstructural and thermal properties of plasma sprayed mullite coatings10.1016/j.ceramint.2010.02.007 ↗
34. Reed · 2006
35. Plasma sprayed thermal barrier coatings for industrial gas turbines: morphology, processing and properties
36. Fabrication and evaluation of plasma-sprayed nanostructured and conventional YSZ thermal barrier coatings10.2174/157341312800620250 ↗
37. Nanostructured yttria stabilized zirconia coatings deposited by air plasma spraying10.1016/S1003-6326(07)60104-6 ↗
38. Nanostructured and conventional YSZ coatings deposited using APS and TTPR techniques10.1016/j.surfcoat.2005.11.122 ↗
39. Improving the thermal shock resistance of plasma sprayed CYSZ thermal barrier coatings by laser surface modification10.1016/j.optlaseng.2011.12.007 ↗
40. Comparison of thermal shock resistances of plasma-sprayed nanostructured and conventional yttria stabilized zirconia thermal barrier coatings10.1016/j.ceramint.2012.05.060 ↗
41. Microstructural characterization of plasma-sprayed nanostructured zirconia powders and coatings10.1016/S0955-2219(02)00096-1 ↗
42. Microstructure and thermal properties of plasma sprayed thermal barrier coatings from nanostructured YSZ10.1007/s11666-010-9535-7 ↗
43. Microstructure, mechanical properties and thermal shock resistance of plasma sprayed nanostructured zirconia coatings10.1016/j.ceramint.2011.04.024 ↗
44. Effect of particle size distribution on isothermal oxidation characteristics of plasma sprayed CoNi- and CoCrAlY coatings10.1007/s11666-007-9131-7 ↗
45. Microstructure and thermal cycling behavior of nanostructured yttria partially stabilized zirconia (YSZ) thermal barrier coatings10.1016/S1002-0721(10)60302-X ↗
46. Overview on the development of nanostructured thermal barrier coatings
47. Thermal spray coatings engineered from nanostructured ceramic agglomerated powders for structural, thermal barrier and biomedical applications: a review10.1007/s11666-006-9010-7 ↗
48. Integrity of nanostructured partially stabilized zirconia after plasma spray processing10.1016/S0921-5093(01)01146-7 ↗
49. A review of microstructure and properties of plasma sprayed ceramic coatings10.1016/0257-8972(89)90052-2 ↗
50. Phase composition and microstructure of vacuum plasma sprayed nanostructured zirconia coating10.1016/S0921-5093(03)00432-5 ↗
51. Phase composition and stability of nanostructured 4.7wt% yttria-stabilized zirconia coatings deposited by atmospheric plasma spraying10.1016/j.surfcoat.2005.03.034 ↗
52. Phase composition of nanostructured zirconia coatings deposited by air plasma spraying10.1016/j.surfcoat.2004.03.041 ↗
53. Adhesion testing of thermally sprayed and laser deposited coatings10.1016/j.surfcoat.2003.11.008 ↗
54. Development and implementation of plasma sprayed nanostructured ceramic coatings10.1016/S0257-8972(01)01470-0 ↗
55. An analysis of nanoindentation in linearly elastic solids10.1016/j.ijsolstr.2008.07.021 ↗
56. Effect of loading rate and holding time on hardness and Young's modulus of EB-PVD thermal barrier coating10.1016/S0257-8972(03)00861-2 ↗
57. Effect of thermal exposure on hardness and Young's modulus of EB-PVD yttria-partially-stabilized zirconia thermal barrier coatings10.1016/j.ceramint.2005.01.018 ↗
58. Bimodal distribution of mechanical properties on plasma sprayed nanostructured partially stabilized zirconia10.1016/S0921-5093(01)01530-1 ↗
59. Toughness, hardness, and wear, Engineered Materials handbook
60. An investigation on oxidation, hot corrosion and mechanical properties of plasma-sprayed conventional and nanostructured YSZ coatings10.1016/j.surfcoat.2011.06.036 ↗