Tailoring grain and intermetallic of as-extruded Al-La-Mg-Fe alloy: Towards a balance of mechanical properties at room and elevated temperatures
Source abstract
Abstract
This study successfully develops a novel Al-La-Mg-Fe alloy with a balance of room-temperature and high-temperature mechanical properties through precise control of grain structure and intermetallics via hot extrusion process. The as-extruded Al-La-Mg-Fe alloys achieve enhanced room-temperature mechanical properties (UTS: 293 ± 13 MPa, El: 6.6 ± 0.3%) coupled with remarkable high-temperature strength-ductility synergy (UTS: 158 ± 5 MPa, El: 24.7 ± 3.0%). The enhanced room-temperature strength-ductility balance originates from the synergistic effects of refined grains, finely dispersed intermetallics, and narrowed intermetallic-free zones, which collectively enhance dislocation motion resistance and promote dislocation accumulation. Moreover, the combined influence of high volume fraction of coarsening-resistant Al 11 La 3 and Al 13 Fe 4 intermetallics and optimized grain boundary density effectively mitigates the detrimental effects of enhanced atomic diffusion and accelerated grain boundary migration at elevated temperatures, resulting in a 54% strength retention at 300°C and demonstrating exceptional high-temperature mechanical performance. Additionally, the crack-buffering zones and blunting mechanisms during high-temperature tensile deformation significantly enhance the plasticity of the alloy. These findings establish fundamental principles for the coordinated optimization of grain size and intermetallics in developing heat-resistant aluminum alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Recent advances in inoculation treatment for powder-based additive manufacturing of aluminium alloys10.1016/j.mser.2024.100773 ↗
2. Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity10.1126/science.aav7086 ↗
3. Heat-resistant Al alloys: microstructural design and microalloying effect
4. Achieving high strength of Al-Cu-Li-Sc alloy over wide temperature range from 25°C to 300°C10.1016/j.msea.2024.147209 ↗
5. Design of a cast Al-based Al-Ni-Cr-Zr eutectic alloy with excellent high temperature mechanical properties10.1016/j.scriptamat.2024.116506 ↗
6. Correlation between precipitates evolution and mechanical properties of Al-Sc-Zr alloy with Er additions10.1016/j.jmst.2021.05.031 ↗
7. Achieving exceptional high-temperature resistant Al matrix composites via two-dimensional BN pinning grain rotation10.1016/j.compositesb.2023.110570 ↗
8. Effects of temperature and bimodal microstructure on the mechanical properties and fracture mechanisms of high-strength Al-Ni-Cu-Fe alloy fabricated through laser powder bed fusion
9. High temperature thermal and mechanical stability of high-strength nanotwinned Al alloys10.1016/j.actamat.2018.11.011 ↗
10. Anticipating impacts of introducing aluminum-cerium alloys into the United States automotive market10.1016/j.resconrec.2019.02.009 ↗
11. A novel high-strength Al-La-Mg-Mn alloy for selective laser melting10.1016/j.jmst.2022.07.046 ↗
12. Post-heat treatment of laser powder bed fusion fabricated Al–La–Mg–Mn alloy: on intermetallic morphology control and strength-ductility balance
13. A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy10.1016/j.actamat.2022.117699 ↗
14. Criteria for developing castable, creep-resistant aluminum-based alloys-a review10.3139/146.101249 ↗
15. Synergistic coupling of Mn-doped skeleton and Mg-toughened matrix: towards a heat-resistant Al–La–Mg–Mn alloy10.1080/21663831.2023.2301132 ↗
16. Microstructure and mechanical properties of cast Al-Ce-Sc-Zr-(Er) alloys strengthened by Al11Ce3 micro-platelets and L12 Al3(Sc,Zr,Er) nano-precipitates10.1016/j.actamat.2022.118354 ↗
17. Role of dislocation density on the onset and intensity of stretcher strain marks in novel Al-Mg alloys with high Mg content10.1016/j.jmrt.2025.02.191 ↗
18. Role of Mg in simultaneously improving the strength and ductility of Al-Mg alloys10.1016/j.msea.2016.01.089 ↗
19. Effect of Fe additions on microstructure and mechanical properties in near-eutectic Al–Ce alloys10.1016/j.msea.2023.145409 ↗
20. The beneficial effect of iron in aluminum-cerium-based cast alloys10.1007/s11661-024-07333-8 ↗
21. Bimodal microstructure evolution and strength-ductility co-enhancement of hot-extruded Al–La–Mg–Mn alloy10.1016/j.msea.2022.144195 ↗
22. Environmental and economic sustainability of additive manufacturing: a systematic literature review10.1016/j.spc.2024.10.012 ↗
23. Reducing the environmental impacts of aluminum extrusion10.1016/j.resconrec.2021.106120 ↗
24. Microstructure and properties of novel Al-Ce-Sc, Al-Ce-Y, Al-Ce-Zr and Al-Ce-Sc-Y alloy conductors processed by die casting, hot extrusion and cold drawing10.1016/j.jmst.2020.03.073 ↗
25. Effect of extrusion ratio on microstructure, texture, and mechanical properties of dual-phase Mg−8Li−6Zn−2Gd alloy10.1016/S1003-6326(23)66437-4 ↗
26. Cube texture in hot-rolled aluminum alloy 1050 (AA1050)—nucleation and growth behavior10.1016/j.actamat.2008.02.037 ↗
27. The effects of ultrasonic vibration on Portevin–Le Chatelier (PLC) effect and stress-strain behavior in aluminum alloy 202410.1016/j.scriptamat.2022.115121 ↗
28. The Portevin–Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy10.1016/j.actamat.2007.03.007 ↗
29. A novel strategy for preparing gradient grained Mg alloy by normal extrusion process10.1016/j.msea.2024.147557 ↗
30. Strength-ductility synergy of Mg-7.5 wt% Sn binary alloys promoted by semisolid isothermal treatment coupled with hot extrusion
31. An additively manufactured heat-resistant Al-Ce-Sc-Zr alloy: microstructure, mechanical properties and thermal stability10.1016/j.msea.2023.144965 ↗
32. Enhancing high-temperature strength in Al-Si alloys: the critical role of vanadium10.1016/j.msea.2024.147316 ↗
33. Eutectic Al–Si–Cu–Fe–Mn alloys with enhanced mechanical properties at room and elevated temperature10.1016/j.matdes.2011.04.005 ↗
34. Preparation of a novel ultra-high strength Al–Si–Cu–Ni alloy at room/elevated temperature by squeeze casting combined with a new heat treatment process10.1016/j.pnsc.2024.06.006 ↗
35. Microstructures and elevated temperature mechanical properties of AlSi12Cu4Ni2 fabricated by laser powder bed fusion10.1016/j.jmapro.2023.02.017 ↗
36. A novel two-stage heat treatment with medium-temperature aging influence on microstructure, Al3(Sc, Zr) nanoprecipitation, and application properties, enhancing selective laser melting of Al–Mg–Sc–Zr alloy10.3390/nano12122078 ↗
37. Load shuffling during creep deformation of an additively manufactured AlCuMnZr alloy10.1016/j.actamat.2022.118557 ↗
38. New generation of eutectic Al-Ni casting alloys for elevated temperature services10.1016/j.msea.2017.10.034 ↗
39. Achieving enhanced strength retention at elevated temperatures in ultrafine-fibrous interconnected Al–Ce–Ni eutectic alloy solidified under super-gravity field10.1016/j.jmrt.2024.04.170 ↗
40. High-temperature mechanical behaviour of Al-10Ce alloy with Sc, Zr, Si, and Mg alloying elements10.1016/j.matdes.2024.113524 ↗
41. Effect of Mn on the elevated temperature mechanical properties of Al-La alloys10.1016/j.matchar.2019.109821 ↗
42. Improvement of strength and ductility of TC4p/AZ91D magnesium matrix composites by modifying the extrusion ratio
43. Ultrafine-grained Al-La-Mg-Mn alloy fabricated by melt spinning and hot extrusion with ultrahigh strength and thermal stability10.1016/j.jallcom.2024.176421 ↗
44. A novel dynamic recrystallization kinetics model based on particle-stimulated nucleation of the HEXed FGH4113A alloy during hot deformation10.1016/j.matchar.2024.114459 ↗
45. Microstructure evolution and mechanical behavior of a binary Al–7Mg alloy processed by equal-channel angular pressing10.1016/j.actamat.2014.10.025 ↗
46. Dislocations, grain size and planar faults in nanostructured copper determined by high resolution X-ray diffraction and a new procedure of peak profile analysis10.1016/S1359-6454(98)00001-9 ↗
47. Dislocations and grain size in electrodeposited nanocrystalline Ni determined by the modified Williamson–Hall and warren–averbach procedures10.1107/S0021889897019559 ↗
48. Strain rate dependence of strengthening mechanisms in ultrahigh strength lath martensite10.1016/j.ijplas.2022.103495 ↗
49. Quantitative model for grain boundary effects on strength-electrical conductivity relation10.1016/j.actamat.2024.120390 ↗
50. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
51. The coupled effects of grain boundary strengthening and Orowan strengthening examined by dislocation dynamics simulations10.1016/j.commatsci.2023.112602 ↗
52. Coarsening kinetics and strengthening mechanisms of core-shell nanoscale precipitates in Al-Li-Yb-Er-Sc-Zr alloy10.1016/j.jmst.2020.05.061 ↗
53. Probing the micro-mechanism of precipitate-strengthened alloys with precipitate free zone: an experimental and theoretical study10.1016/j.ijplas.2024.104085 ↗
54. Healing the high-temperature-retrogression-caused wide precipitation-free zones in Al-Zn-Mg-Cu alloy via strain-aging induced precipitates10.1016/j.msea.2024.147398 ↗
55. An innovative strategy to prepare fine-grained Mg-Al alloys with a superior strength-ductility synergy via wire-arc directed energy deposition
56. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
57. The effect of heat treatment on Mg2Si coarsening in aluminum 6105 alloy10.1007/s11661-004-0354-7 ↗
58. Grain size control method for enhancing high-temperature durability of Al–Cu–Mg–Ag alloy10.1016/j.jmrt.2024.06.017 ↗
59. The influence of grain boundary character distribution on the high-temperature creep behavior and damage mechanism of Inconel 71810.1016/j.matdes.2024.113525 ↗
60. Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys10.1126/science.abf6986 ↗
61. Nanolaminate transformation-induced plasticity–twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance10.1016/j.actamat.2014.11.010 ↗
62. On the exceptional damage-tolerance of gradient metallic materials10.1016/j.mattod.2019.09.023 ↗