The influence of surface treatment on the transport properties of hardened calcium sulfoaluminate cement-based materials
Source abstract
Abstract
Abstract In this study, the efficiency of surface treatment in the calcium sulfoaluminate (CSA) cement-based materials were explored. Several frequently used surface treatment agents (sodium silicate (NS), and magnesium fluorosilicate (MFS), tetraethyl orthosilicate (TEOS), poly-methyltriethoxysilane (PMTS)) were applied on hardened CSA mortar and concrete. The penetration depth of these agents and their influence on the properties of water sorptivity, carbonation resistivity, mechanical property, and pore structure was investigated. Results showed that the penetration depth of NS and MFS was around 60-85 μm, and that PMTS, MFS, TEOS, and NS could reduce the water sorptivity by 94.0%, 17.0%, 11.0% and 7.8%, respectively. PMTS and TEOS could reduce the carbonation rate by 38.7% and 14.3%, respectively, but NS and MFS could not reduce it. In addition, PMTS can reduce the pores less than 50 nm (S pores) significantly, whereas has little influence on pores between 50 nm and 1 μm (M pores). NS, MFS and TEOS would reduce M pores, but increase S pores. By the combination of permeability and pore structure test, it was found that volume of S pores was positively correlated to the carbonation rate and the volume of M pores was positively correlated to the water sorptivity. Furthermore, it was found that surface treatment had little influence on the compressive strength, but it could increase flexural strength slightly. This work evidenced the effectiveness of surface treatment on CSA cement-based materials and highlighted the critical role of fine pores (less than 50 nm) in their transport properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
2. Surface treatments for concrete: Assessment methods and reported performance10.1016/S0950-0618(97)00019-6 ↗
3. Use of surface treatment materials to improve concrete durability10.1061/(ASCE)0899-1561(1999)11:1(36) ↗
4. A review on surface treatment for concrete - Part 2: Performance10.1016/j.conbuildmat.2016.11.128 ↗
5. A review on concrete surface treatment Part I: types and mechanisms10.1016/j.conbuildmat.2016.12.025 ↗
6. Evaluation of the durability of mortar and concrete applied with inorganic coating material and surface treatment system10.1016/j.conbuildmat.2005.08.012 ↗
7. Effect of surface penetrating sealer on the microstructure properties of cement-based composites10.4028/www.scientific.net/AMR.651.245 ↗
8. Surface skin protection of concrete with silicate-based impregnations: influence of the substrate roughness and moisture10.1016/j.conbuildmat.2014.07.071 ↗
9. The investigation of factors affecting the water impermeability of inorganic sodium silicate-based concrete sealers10.1016/j.conbuildmat.2015.06.001 ↗
10. Effects of inorganic surface treatment on water permeability of cement-based materials10.1016/j.cemconcomp.2016.01.002 ↗
11. Interactions between inorganic surface treatment agents and matrix of Portland cement-based materials10.1016/j.conbuildmat.2016.03.091 ↗
12. Experimental exploration of the waterproofing mechanism of inorganic sodium silicate-based concrete sealers10.1016/j.conbuildmat.2015.12.069 ↗
13. Effect of inorganic surface treatment on surface hardness and carbonation of cement-based materials10.1016/j.cemconcomp.2018.03.026 ↗
14. Carbonation proofing mechanism of silicate-based surface impregnations10.3151/jact.16.512 ↗
15. Characterization of silicate sealers on concrete10.1016/S0008-8846(97)00167-1 ↗
16. Effects of nano-SiO2 on the permeability-related properties of cement-based composites with different water/cement ratios10.1007/s10853-017-1906-8 ↗
17. Characteristics of surface-treatment of nano-SiO2 on the transport properties of hardened cement pastes with different water-to-cement ratios10.1016/j.cemconcomp.2014.07.022 ↗
18. Effects and mechanisms of surface treatment of hardened cement-based materials with colloidal nanoSiO2 and its precursor10.1016/j.conbuildmat.2013.11.062 ↗
19. Ethyl silicate for surface treatment of concrete - Part II: characteristics and performance10.1016/j.cemconcomp.2011.11.021 ↗
20. Ethyl silicate for surface treatment of concrete - Part I: Pozzolanic effect of ethyl silicate10.1016/j.cemconcomp.2011.12.003 ↗
21. Ethyl silicate for surface protection of concrete: performance in comparison with other inorganic surface treatments10.1016/j.cemconcomp.2013.05.008 ↗
22. The use of tetraethyl orthosilicate silane (TEOS) for surface-treatment of hardened cement-based materials: a comparison study with normal treatment agents10.1016/j.conbuildmat.2016.05.028 ↗
23. In situ Ca(OH)2 consumption of TEOS on the surface of hardened cement-based materials and its improving effects on the Ca-leaching and sulfate-attack resistivity10.1016/j.conbuildmat.2016.03.155 ↗
24. Long-term performance of surface impregnation of reinforced concrete structures with silane10.1016/j.conbuildmat.2013.07.038 ↗
25. Properties and performance of silane: blended cement systems10.1617/s11527-012-9984-1 ↗
26. Influence of silane-based water repellent on the durability properties of recycled aggregate concrete10.1016/j.cemconcomp.2012.08.008 ↗
27. Effects of silanes and silane derivatives on cement hydration and mechanical properties of mortars10.1016/j.conbuildmat.2016.11.004 ↗
28. Influence of silane-based impregnation agent on the permeability of concretes10.1007/s12205-019-1121-z ↗
29. Efficiency of water repellent surface treatment: Experiments on low performance concrete and numerical investigation with pore network model10.1016/j.conbuildmat.2019.08.019 ↗
30. Efficacy of surface hydrophobic agents in reducing water and chloride ion penetration in concrete10.1617/s11527-006-9218-5 ↗
31. Preparation and evaluation of polymer/clay nanocomposite surface treatments for concrete durability enhancement10.1016/j.cemconcomp.2011.11.006 ↗
32. Effect of polymer modified cementitious coatings on water and chloride permeability in concrete10.1016/j.conbuildmat.2013.08.050 ↗
33. Interaction of TEOS with cementitious materials: chemical and physical effects10.1016/j.cemconcomp.2014.09.010 ↗
34. Hydrophobic silane coating films for the inhibition of water ingress into the nanometer pore of calcium silicate hydrate gels10.1039/C9CP03266E ↗
35. Use of nanosilica- or nanolime-additioned TEOS to consolidate cementitious materials in heritage structures: physical and mechanical properties of mortars10.1016/j.cemconcomp.2018.09.011 ↗
36. The effect of water repellent surface impregnation on durability of cement-based materials10.1155/2017/8260103 ↗
37. Y. Sakai, Relationship between water permeability and pore structure of cementitious materials, Mag. Concr. Res., (Ahead of print).
38. Relationship between pore structure and permeability of hardened cement mortars: on the choice of effective pore structure parameter10.1016/S0008-8846(97)00111-7 ↗
39. The effect of w/c ratio and curing temperature on the permeability of hardened cement paste10.1016/0008-8846(81)90087-9 ↗
40. Relationship between water permeability and pore structure of Portland cement paste blended with fly ash10.1016/j.conbuildmat.2018.04.147 ↗
41. Structure and physical properties of hardened portland cement paste10.1111/j.1151-2916.1958.tb13494.x ↗
42. Pore structure controlling the carbonation of a hardened cement matrix blended with mineral admixture10.1680/adcr.1999.11.2.81 ↗