Use of limestone sands and fillers in concrete without superplasticizer
Source abstract
Abstract
Abstract This paper deals with the effects of the amount of limestone fillers with respect to the rheological, mechanical, and dimensional properties of concretes without superplasticizer. These concretes were made with two limestone coarse aggregates and one limestone sand from the same quarry, in order to avoid any artifact. Five sand containing fillers rate between 1.8% and 24% – representative rates of the categories defined in the EN 12260 norm for aggregates for concretes – were produced by mixture of original sand with its fine fraction or its grained fraction extracted beforehand by washing. The concretes were mix designed with the BetonlabPro2 software, whose algorithms take into account the presence of the limestone fillers. The experimental results show that the concretes containing from 100 to 150 kg/m 3 limestone fillers often present optimal properties, with equal consistency. But, higher quantities of fillers do not deteriorate significantly the properties of the concretes, even if their packing density decreases. This behavior is explained not only by the binding effect allotted to the limestone fillers, but also by an improvement of the paste-aggregates bond.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Portland-limestone cements. Their properties and hydration compared to those of other composite cements10.1016/j.cemconcomp.2004.02.006 ↗
2. Effect of a high calcite filler addition upon microstructural, mechanical, shrinkage and transport properties of a mortar10.1016/j.cemconres.2008.02.007 ↗
3. Utilisation of high volumes of limestone quarry wastes in concrete industry (self-compacting concrete case)
4. Achour T, Étude de l’influence de la nature des granulats sur les propriétés des bétons hydrauliques: cas des granulats calcaires tunisiens. Thesis dissertation, National Engineering School of Tunis (Tunisia)/University Henri Poincaré Nancy (France); 2007.
5. High-strength concrete with different fine aggregate10.1016/S0008-8846(02)00860-8 ↗
6. De Larrard F., Concrete Mixture Proportioning – A Scientific Approach, Modern Concrete Technologie, Series 9, Mindess S. and A. Bentur, Editors, E & FN SPON, London, UK, 1999.10.1201/9781482272055 ↗
7. Limestone filler cement in low w/c concrete: a rational use of energy10.1016/S0008-8846(02)01087-6 ↗
8. NF EN 12620, Granulats pour bétons, AFNOR Norm, Paris; 2008.
9. XP P 18-545, Granulats – Eléments de définition, conformité, codification, AFNOR, Paris; 2008.
10. NF EN 206-1, Béton, partie 1: spécifications, performances, production et conformité, AFNOR, Paris; 2004.
11. NF P 18-508, Additions pour béton hydraulique – Additions calcaires – Spécifications et critères de conformité, AFNOR, Paris; 1995.
12. NT 21.30, Granulats à bétons, Tunisian Norm, INNORPI; 2006.
13. Sedran Th, De Larrard F. BétonlabPro2 – Logiciel de formulation de bétons – version exécutable sous Windows, logiciel sur CD ROM avec aide en ligne, Presses de l’Ecole Nationale des Ponts et Phaussées; juin 2000.
14. De Larrard F, Sedran Th. Le logiciel BétonlabPro3, Bulletin de Liaison des Ponts et Chaussées, No. 270–271, 2007, pp. 75–85.
15. Compaction index of cement paste of normal consistency10.1016/j.conbuildmat.2009.05.005 ↗
16. La composition du béton hydraulique, du laboratoire au chantier
17. Calcareous fillers contribution to the paste-aggregates bond. Tunisians exemples10.1617/s11527-007-9287-0 ↗
18. Tensile strength and elastic modulus of calcareous concrete: application to Tunisians’ mixtures10.1617/s11527-007-9340-z ↗
19. Données météo de la région de Tunis. .
20. UNPG, CEBTP, LCPC, Valorisation et pleine emploi des matériaux calcaires, opération 52 EG 125; 1990.
21. Manuel Technique: Spécifications techniques relatives aux sables de concassage pour bétons hydrauliques et enrobés bitumineux en Tunisie. 2011, en cours d’édition.