Quasi-in-situ observation: study on the evolution of the brass-texture in oriented silicon steel during the process of normalizing annealing
Source abstract
Abstract
The presence of the brass texture ({110}<112>) impairs the magnetic properties of oriented silicon steel. However, the mechanism governing the evolution of this texture during normalizing annealing remains unresolved. In this study, the nucleation and growth behavior of the brass texture were systematically investigated during the normalizing process. Further, the microstructure of hot-rolling sheets during the normalizing process was characterized by quasi-in-situ electron backscatter diffraction and an independently developed image registration technique. During the initial stage of growth of brass-oriented grains, small-sized grains are more dependent on Coincidence Site Lattice (CSL) grain boundaries, the low interfacial energy of the Σ7 and Σ9 enables the grains to grow rapidly at the grain boundary. brass orientation grains offer an advantage over Copper and Goss orientation grains in competitive growth. With the exception of the brass orientation grains that nucleate and grow within the center layer, all other brass orientation grains exhibit oriented growth. Although deformation energy storage and initial grain size exhibit relatively minor effects, the growth of quasi-brass orientation grains is highly sensitive to environmental conditions. Directly growing brass orientation grains located at the same spatial position offer a slight advantage over grains formed by nucleation and growth steps. The growth status of directly growing brass orientation grains at different spatial locations shows that Σ9 contributes more than Σ7. The growth behavior of nucleated and growing grains at different spatial locations shows that the CSL relationship dominates the contribution to grain growth, while the contribution of interfacial energy is relatively weak.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Comprehensive study on the through-process goss texture evolution in Fe-3.78 wt.%Si grain oriented electrical steel10.1016/j.matchemphys.2023.128428 ↗
2. The role of grain colony on secondary recrystallization in grain-oriented electrical steel: new insights from an original tracking experiment
3. Role of inhibitor behavior in abnormal growth of goss grain in grain-oriented silicon steel: experiments and modeling10.1016/j.jmrt.2023.03.179 ↗
4. Coincidence grain boundary and role of primary recrystallized grain growth on secondary recrystallization texture evolution in Fe-3%Si alloy10.1016/0956-7151(94)90200-3 ↗
5. The formation of the {112} shear texture in hot-rolled sheets of electrical steels10.1002/srin.202200939 ↗
6. Formation of the Goss orientation near the surface of 3 pct silicon steel during hot rolling10.1007/BF02650113 ↗
7. The origins of the goss orientation in non-oriented electrical steel and the evolution of the goss texture during thermomechanical processing10.1002/srin.201800582 ↗
8. Orientation evolutions during hot rolling of electrical steel containing initial columnar grains
9. Texture evolution of columnar grains in electrical steel during hot rolling10.1016/S1006-706X(13)60184-3 ↗
10. Microstructure and texture evolution of 6016 aluminum alloy during hot compressing deformation10.1007/s12598-014-0331-2 ↗
11. Surface patterning for combined digital image correlation and electron backscatter diffraction in-situ deformation experiments10.1016/j.matchar.2020.110332 ↗
12. Texture analysis with MTEX - free and open source software toolbox
13. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
14. A multi-scale study of the interaction of Sn solutes with dislocations during static recovery in α-Fe10.1016/j.actamat.2019.05.021 ↗
15. Effect of true strain rate control on hot compression of a 3%Si steel10.2320/jinstmet1952.55.3_286 ↗
16. Effect of Zener-Hollomon parameter on deformation microstructure in Fe-3%Si alloy
17. Boundary strengthening in undeformed and deformed polycrystals10.1016/j.msea.2005.04.061 ↗
18. Analysis of deformation textures of asymmetrically rolled steel sheets10.1016/S0020-7403(01)00025-X ↗
19. On the influence of austenite content in orientation selectivity and shear texture evolution during hot rolling of Fe-3 wt% Si grain-oriented electrical steel10.1016/j.matchar.2024.114339 ↗
20. The influence of normalization temperatures on different texture components and magnetic properties of nonoriented electrical steels10.1002/srin.202000361 ↗
21. Recovery and recrystallization in commercial purity aluminum cold rolled to an ultrahigh strain10.1016/j.actamat.2013.05.024 ↗
22. Revealing curvature and stochastic effects on grain growth: a thermodynamic perspective from extremal principle10.1016/j.scriptamat.2022.114766 ↗
23. Influence of columnar grains on the recrystallization texture evolution in Fe-3%Si electrical steel10.3724/SP.J.1037.2011.00699 ↗
24. Modeling of recrystallization textures: interaction of nucleation and growth10.1016/S1359-6454(02)00020-4 ↗
25. Quasi-in-situ EBSD study of fast static recrystallization evolution of AZ61 alloy at twinning interactions during electric pulse treatment10.1016/j.matchar.2022.112471 ↗
26. Disparity in recrystallization of α & γ fibers and its impact on cube texture formation in non-oriented electrical steel10.1016/j.actamat.2021.117141 ↗
27. Mathematical models for predicting the austenite grain size in hot working of GCr15 steel10.1016/j.commatsci.2008.11.003 ↗
28. On the bias in the AUC variance estimate10.1016/j.patrec.2023.12.012 ↗
29. Deformation and annealing driven microstructure, texture, grain boundary and mechanical properties changes in interstitial free steel10.1016/j.matchar.2025.115166 ↗
30. Orientation dependence of secondary recrystallisation in silicon-iron10.1016/S1359-6454(03)00193-9 ↗
31. Re-evaluation of the Ibe-Lucke growth selection experiment in a Fe-Si single crystal10.1016/j.actamat.2005.02.030 ↗
32. The synergistic effects of boron and impression creep testing during paced controlling of temperature for P91 steels10.1002/adem.202300053 ↗