journal article·2025-01Open access

Effect of Cu content on microstructure and high-temperature oxidation behaviors of AlCu CoCrFeNi2.1 high-entropy alloys manufactured by laser directed energy deposition

Zhaoyang Liu, Jiawei Liu, Xiaokang Fan, Tao Zou, Zhongwei Liang

Abstract

In this study, thin-wall builds of AlCu x CoCrFeNi 2.1 ( x = 0.00, 0.25, 0.50, 0.75, 1.00, 1.25) high-entropy alloys were additively manufactured by laser direct energy deposition process. The effect of Cu content on microstructure evolution and high-temperature oxidation behaviors of prepared HEAs was studied. The results showed that the increase of Cu content facilitates the microstructure transformation from fine FCC/BCC lamellar eutectic structure to well-developed FCC columnar dendrites and depleted BCC interdendrites. Drastic Cu segregation mainly is formed at the outside edges of FCC columnar dendrites. During the high-temperature oxidation process, the sample with x = 0.00 generates relative complete oxide layer predominantly composed of Cr 2 O 3 upper-layer and Al 2 O 3 inner-layer. Plenty of AlN particles are formed beneath the oxidized surface of matrix. In the samples with x = 0.25 to 1.25, the added Cu brings in numerous nanoscale Cu 2 O particles within the oxide layer, which not only preferentially thickens the oxide layer by promoting the formation of Al 2 O 3 , but also causes numerous microscale voids by inhabiting and further decomposing the AlN particles. Due to the serious coefficient of thermal expansion difference between copper oxides, oxide layer and matrix, the Cu-rich outline edges of columnar dendrites contribute to the formation of humped stripes at oxidized surface and promote the initial cracking of oxide layer. The increase of Cu content facilitates the cracking and spalling of oxide layer by deteriorating the adhesion force between oxide layer and matrix, and resultantly exacerbates high-temperature oxidation resistance of the AlCu x CoCrFeNi 2.1 HEAs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
4. Refractory high-entropy alloys with ultra-high strength and strain hardening ability induced by heterogeneous deformation and microbands10.1016/j.jmst.2023.12.057 ↗
5. Development and directed energy deposition of high strength Hf5Mo15Nb35Ta25Ti20 refractory high entropy alloys10.1016/j.matchar.2024.113679 ↗
6. Additively manufactured heterogeneous precipitation-strengthened high-entropy alloys with high strength and ductility
7. Design of novel AlCoFeNiV high-entropy alloys with high-strength and high-ductility
8. Novel laser cladding FeCoNiCrNb0.5Mox high-entropy alloy coatings with excellent corrosion resistance10.1016/j.matlet.2022.133714 ↗
9. Superior anticorrosion performance of crystal-amorphous FeMnCoCrNi high-entropy alloy10.1016/j.scriptamat.2021.114454 ↗
10. A novel single-crystal L12-strengthened Co-rich high-entropy alloy with excellent high-temperature strength and antioxidant property10.1016/j.jmrt.2023.01.182 ↗
11. Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys10.1016/j.jallcom.2014.11.012 ↗
12. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
13. Structural evolution in TiZrHfNb high-entropy alloy
14. A refractory Hf25Nb25Ti25Zr25 high-entropy alloy with excellent structural stability and tensile properties10.1016/j.matlet.2014.05.134 ↗
15. Effects of annealing temperature on microstructures and tensile properties of a single FCC phase CoCuMnNi high-entropy alloy10.1016/j.jallcom.2019.152111 ↗
16. Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy10.1016/j.actamat.2016.01.050 ↗
17. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
18. Thermal stability, microstructure and texture evolution of thermomechanical processed AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.msea.2020.140012 ↗
19. Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi2.110.1016/j.msea.2018.03.078 ↗
20. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.actamat.2017.07.041 ↗
21. Selective laser melting of dense and crack-free AlCoCrFeNi2.1 eutectic high entropy alloy: synergizing strength and ductility10.1016/j.jmst.2021.11.049 ↗
22. Insights into micro-mechanical response and texture of the additively manufactured eutectic high entropy alloy AlCoCrFeNi2.110.1016/j.jallcom.2020.154034 ↗
23. Study on precipitation in (CoCrFeMnNi)90Al6Ti4 high entropy alloy10.1016/j.jallcom.2024.175862 ↗
24. Development of a large size FCC high-entropy alloy with excellent mechanical properties10.1016/j.msea.2019.138039 ↗
25. Effects of AlCoCrFeNiTi high-entropy alloy on microstructure and mechanical properties of pure aluminum10.1016/j.jmst.2020.04.008 ↗
26. A novel Fe-rich Co-free high entropy alloys with low cost and excellent comprehensive mechanical properties10.1016/j.intermet.2023.108071 ↗
27. Effect of FeCoNiMnCr high-entropy alloy reinforcement on mechanical, wear, and thermal expansion behavior of copper matrix composites10.1007/s11837-023-06066-0 ↗
28. Fabrication and characterization of metal-high entropy alloy composites10.1007/s40962-019-00383-4 ↗
29. Microstructure evolution of Al0.6CoCrFeNi high entropy alloy powder prepared by high pressure gas atomization10.1016/S1003-6326(18)64728-4 ↗
30. Study of the stabilization process of gas atomized Al0.5CoCrFeNi2Ti0.5 high-entropy alloy in phase transformation10.1016/j.jallcom.2022.164230 ↗
31. Laser-aided additive manufacturing of high entropy alloys: processes, properties, and emerging applications10.1016/j.jmapro.2022.04.014 ↗
32. Recent advances on high-entropy alloys for 3D printing10.1002/adma.201903855 ↗
33. Materials and manufacturing renaissance: additive manufacturing of high-entropy alloys10.1557/jmr.2020.140 ↗
34. Directed energy deposition additive manufacturing of CoCrFeMnNi high-entropy alloy towards densification, grain structure control and improved tensile properties10.1016/j.msea.2022.144272 ↗
35. Laves phase and equiaxed grains formation in directed energy deposited AlCuFeNiTi high entropy alloy10.1016/j.jallcom.2023.171089 ↗
36. High-strength lamellar high-entropy alloys in-situ synthesized by laser additive manufacturing10.1016/j.msea.2023.144745 ↗
37. Y-Hf co-doped AlCoCrFeNi2.1 eutectic high-entropy alloy with excellent oxidation and spallation resistance under thermal cycling conditions at 1100 °C and 1200 °C10.1016/j.corsci.2021.109515 ↗
38. Effect of Si content on the surface high-temperature oxidation mechanism in Ni5Y-containing NiAIYSi alloys10.1016/j.corsci.2023.111173 ↗
39. Effect of Cu-doping on tribological properties of laser-cladded FeCoCrNiCux high-entropy alloy coatings10.1016/j.triboint.2023.108868 ↗
40. Effect of Cu content on the microstructure and corrosion resistance of AlCrFeNi3Cux high entropy alloys10.1016/j.corsci.2023.111313 ↗
41. Effects of Cu content on microstructure and high-temperature oxidation behavior of Ti-Al-Si-Cu-N nanocomposite films10.1016/S1875-5372(17)30108-X ↗
42. Influence of Cu content on high temperature oxidation behavior of AlCoCrCuxFeNi high entropy alloys (x = 0; 0.5; 1)10.1016/j.intermet.2016.12.015 ↗
43. Anisotropy study of the microstructure and properties of AlCoCrFeNi2.1 eutectic high entropy alloy additively manufactured by selective laser melting10.1016/j.jmst.2022.04.020 ↗
44. Control of crystal orientation and continuous growth through inclination of coaxial nozzle in laser powder deposition of single-crystal superalloy10.1016/j.jmatprotec.2015.11.017 ↗
45. Tailoring microstructure and mechanical property of laser powder deposited Inconel 718 superalloy via hybrid processing strategies10.1016/j.jmapro.2021.07.005 ↗
46. Phase separation and microhardness of rapidly solidified high-entropy CoCrFeNiCux alloys10.1016/j.jallcom.2020.156451 ↗
47. Effect of heat treatment on microstructure and mechanical properties of direct energy deposited AlCoCrFeNi2.110.1007/s11666-022-01390-4 ↗
48. Effects of Cu additions on microstructure and mechanical properties of as-cast CrFeCoNiCux high-entropy alloy10.1016/S1003-6326(23)66223-5 ↗
49. Effect of Cu content on the microstructure and mechanical properties of Fe20Co30Ni10Cr20Mn20 FCC-typed HEAs10.1016/j.msea.2024.146336 ↗
50. Effect of Cu content on microstructure and properties of CoCrFeNiCux high-entropy alloy coatings prepared by induction cladding10.1016/j.jallcom.2022.167896 ↗
51. Microstructure and mechanical properties of multi-principal component AlCoCrFeNiCux alloy10.1007/s12598-014-0268-5 ↗
52. High temperature and short-term oxidation behavior of CoCrCu1.2FeNi high entropy alloy in solid and semi-solid state10.1016/j.corsci.2021.109897 ↗
53. Effect of Cu segregation on the phase transformation and properties of AlCrFeNiTiCux high-entropy alloys10.1016/j.intermet.2021.107397 ↗
54. Influence of tungsten on microstructure evolution and mechanical properties of selected novel FeCoCrMnWx high entropy alloys10.1016/j.intermet.2021.107161 ↗
55. Wagner · Beitrag zur Theorie des Anlaufvorgangs · 1933 · 21B · 25
56. Effect of rare earth elements on high temperature oxidation behaviour of austenitic steel10.1016/j.corsci.2019.108359 ↗
57. Unraveling the origin of the excellent high-temperature oxidation resistance of an AlCrFeNiTi complex concentrated alloy10.1016/j.corsci.2023.111116 ↗
58. High-temperature oxidation and diffusion studies on selected Al–Cr–Fe–Ni high-entropy alloys for potential application in thermal barrier coatings10.1016/j.intermet.2024.108273 ↗
59. Birks · 2006
60. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
61. Role of Cu addition in enhancing strength-ductility synergy in transforming high entropy alloy10.1016/j.matdes.2022.110487 ↗
62. Cu assisted stabilization and nucleation of L12 precipitates in Al0.3CuFeCrNi2 fcc-based high entropy alloy10.1016/j.actamat.2017.02.053 ↗
63. Optimizing corrosion resistance of equiatomic AlCoCrFeNi high entropy alloys via heat treatment10.1016/j.jallcom.2023.172091 ↗
64. Simultaneous internal oxidation and nitridation of Ni–Cr–Al alloys10.1023/A:1010304026026 ↗
65. Investigations on the growing, cracking and spalling of oxides scales of powder metallurgy Rene95 nickel-based superalloy10.1016/j.apsusc.2011.06.005 ↗
66. Effect of Cu on oxidation behaviour of FCC Fe-Ni-Cr-Al and Ni-Cr-Al based alloys10.1016/j.corsci.2019.108273 ↗
67. The oxidation of two ternary Ni–Cu–5 at.%Al alloys in 1 atm of pure O2 at 800–900°C10.1023/A:1026071219529 ↗
68. Roles of preoxidation, Cu2O particles, and interface pores on the strength of eutectically bonded Cu/α-Al2O310.1016/j.matdes.2008.06.034 ↗
69. Oxidation behavior of Al8Co17Cr17Cu8Fe17Ni33, Al23Co15Cr23Cu8Fe15Ni15, and Al17Co17Cr17Cu17Fe17Ni17 compositionally complex alloys (High-Entropy alloys) at elevated temperatures in air10.1002/adem.201500179 ↗
70. The mechanical properties and breakdown of surface oxide films at elevated temperatures