journal article·2025-09Open access

Mechanism of liquid film migration and interface reaction in multi-layer aluminum sheets during brazing based on the homogenization annealing

Zhipeng Yuan, Yifan Lu, Yiyou Tu, Xingxing Wang, Zenglei Ni, Jin Peng, Xiao Chen, Heshuai Yu, Syed Raza Ali Raza, Shuo Yin

Abstract

The influence of precipitate distribution and strain on the microstructure of AA4343/AA3xxx/AA4343 multi-layer aluminum sheets was investigated using optical microscopy (OM), glow discharge optical emission spectrometry (GDOES), scanning electron microscope (SEM), transmission electron microscopy (TEM) and electron backscatter diffraction (EBSD). This study evaluates the microstructure evolution and brazing performance of multilayer aluminum sheets. This study evaluates the microstructural evolution and brazing performance of multi-layer aluminum sheets, with a particular focus on understanding the conditions that lead to the harmful process of liquid film migration (LFM) during brazing. The Bergstrom hardening model was used to calculate the dislocation density in the sheet. The dislocation densities at which LFM and full core recrystallization occurred were found to differ. The results reveal the mechanism of solid-liquid interaction of multi-layer aluminum sheets during brazing and clarify the driving force of LFM during brazing. Consequently, these results provide important insights for the design and theoretical research of functional layered aluminum sheets.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Anodic Oxide Films and Nanostructures · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Effects of L12 precipitates containing Zr, Er, and Y on the precipitation of Al–Zn–Mg alloys at elevated temperatures10.1016/j.matchar.2024.114374 ↗
2. Application of response surface methodology for optimization of hybrid friction diffusion bonding of tube-to-tube-sheet connections in coil-wound heat exchangers10.1016/j.jmrt.2018.11.012 ↗
3. Study on the structural transformation of 6xxx composite four-layer aluminum alloy sheet during brazing and artificial aging and its influence on strengthening and corrosion behavior10.1016/j.corsci.2024.111886 ↗
4. Microstructure evolution of warm deformed multilayered Al alloy sheet during brazing10.1016/j.jmatprotec.2020.116639 ↗
5. Validation of a model for static and dynamic recrystallization in metals10.1016/j.ijplas.2011.12.006 ↗
6. Microstructural and micromechanical evolution during dynamic recrystallization10.1016/j.ijplas.2017.09.009 ↗
7. Dynamic recovery and recrystallization mechanisms during ultrasonic spot welding of Al-Cu-Mg alloy10.1016/j.matchar.2017.06.018 ↗
8. Liquid film migration in warm formed aluminum brazing sheet10.1007/s11661-017-4268-6 ↗
9. Wittebrood · 2009
10. Mechanisms of liquid film migration (LFM) in aluminum brazing sheet10.4271/971849 ↗
11. Size effect affected formability of sheet metals in micro/meso scale plastic deformation: experiment and modeling10.1016/j.ijplas.2014.11.002 ↗
12. Nylén · 2000 · 1737
13. Liquid film migration during aluminum brazing10.4271/971848 ↗
14. In Mechanistic studies of brazing in clad aluminium alloys10.4028/www.scientific.net/MSF.217-222.1703 ↗
15. Diffusion induced grain boundary migration (DIGM) and liquid film migration (LFM) in an Al-2.07 wt% Cu alloy10.1016/0956-7151(91)90101-6 ↗
16. Solidification studies of automotive heat exchanger materials10.1007/s11837-006-0228-0 ↗
17. In situ investigation of liquid Ga penetration in Al bicrystal grain boundaries: grain boundary wetting or liquid metal embrittlement?10.1016/j.actamat.2004.09.012 ↗
18. Numerical model for the effect of grain boundaries on the total amount diffused10.1016/0956-7151(94)90296-8 ↗
19. Penetration of liquid metals into solid metals and liquid metal embrittlement10.1016/j.msea.2004.05.042 ↗
20. Diffusion of silicon in aluminum10.1007/BF02663412 ↗
21. Mechanisms of liquid film migration (LFM) in aluminum brazing sheet10.4271/971849 ↗
22. Effect of temperature and sheet temper on isothermal solidification kinetics in clad aluminum brazing sheet10.1007/s11661-016-3638-9 ↗
23. Effect of microstructure on diffusional solidification of 4343/3005/4343 multi-layer aluminum brazing sheet10.1007/s11661-012-1550-5 ↗
24. Enhanced dispersoid precipitation and dispersion strengthening in an Al alloy by microalloying with Cd10.1016/j.actamat.2018.07.001 ↗
25. Evolution of grain boundary phases during the homogenization of AA7020 aluminum alloy10.1007/s11661-008-9741-9 ↗
26. The Al-Si (aluminum-silicon) system10.1007/BF02868729 ↗
27. Dispersoid strengthening in AA3xxx alloys with varying Mn and Si content during annealing at low temperatures10.1016/j.msea.2013.01.004 ↗
28. Solid-state intermetallic phase tranformations in 3XXX aluminium alloys10.1016/S1359-6454(02)00085-X ↗
29. Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization10.1016/S1359-6454(03)00160-5 ↗
30. A crystallographic identification of intermetallic phases in Al–Si alloys10.1016/j.matlet.2004.05.091 ↗
31. Formation of Al15Mn3Si2 phase during solidification of a novel Al-12% Si-4% Cu-1.2% Mn heat-resistant alloy and its thermal stability10.1007/s11665-018-3133-0 ↗
32. Combining HAADF STEM tomography and electron diffraction for studies of α-Al (Fe, Mn) Si dispersoids in 3xxx aluminium alloys10.1080/14786435.2015.1006294 ↗
33. Effect of Ag additions on the lengthening rate of Ω plates and formation of σ phase in Al-Cu-Mg alloys during thermal exposure10.1016/j.matchar.2016.11.008 ↗
34. Precipitation of partially coherent α-Al (Mn, Fe) Si dispersoids and their strengthening effect in AA 3003 alloy10.1016/j.actamat.2011.11.003 ↗
35. An experimental and theoretical investigation of the formation of Zr-containing dispersoids in Al–4.5 Zn–1Mg aluminum alloy10.1016/j.msea.2010.01.012 ↗
36. Thermodynamics-based computational design of Al-Mg-Sc-Zr alloys10.1007/s11661-009-0168-8 ↗
37. Modelling recrystallization after hot deformation of aluminium10.1016/1359-6454(96)00078-X ↗
38. On abnormal subgrain growth and the origin of recrystallization nuclei10.1016/S1359-6454(03)00079-X ↗
39. Nucleation and growth during recrystallization10.1590/S1516-14392005000300002 ↗
40. In situ synthesis of high strength Ag brazing filler metals during induction brazing process10.1016/j.scriptamat.2015.07.041 ↗
41. Humphreys · 2012
42. A dislocation model for the stress-strain behaviour of polycrystalline α-Fe with special emphasis on the variation of the densities of mobile and immobile dislocations10.1016/0025-5416(70)90081-9 ↗
43. Formability improvement with independent die and punch temperature control10.1007/s12289-012-1115-6 ↗
44. In Constitutive modelling of aluminium alloy sheet at warm forming temperatures10.1088/1742-6596/734/3/032064 ↗