Effect of acidic and sulfated environments on phase transformation, compressive strength and microstructure of natural rubber latex-modified cement pastes
Source abstract
Abstract
This study investigated the influence of aggressive acid and sulfate media on the phase transformation of cement materials to which natural rubber latex was added. After 28 days of curing underwater, all samples were subjected to sulfuric acid (H2SO4) and sodium sulfate (Na2SO4) solutions for 0, 7, 14, or 28 days. After that, X-ray diffraction (XRD) was used for phase identification. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) was used to confirm the chemical functionally of the samples. The microstructure and elemental composition were also studied using scanning electron microscopy (SEM) and energy X-ray dispersive spectroscopy (EDS), respectively. XRD data showed no evidence of any clear relationship in rubber-modified cement pastes between any phase transformation and natural rubber content. FTIR results confirm the presence of portlandite, calcite, gypsum and C–S–H phases and indicate interaction between the rubber and cement phases. The inclusion of natural rubber latex in cement led to formation of a water channel structure of the bassanite phase (CaSO4 0.625H2O) after 14 and 28 days of exposure to sulfuric acid solutions. Bassanite (CaSO4 0.5H2O) and the water channel structures of bassanite were not found in the samples after sodium sulfate attack. Based on the results of compressive strength tests, it was suggested that an optimal ratio (rubber/cement = 11.11%) enhanced the stability of cement paste after acid and sulfate exposure. From SEM images, a major change in morphology was observed for samples exposed to H2SO4 compared to those subjected to Na2SO4.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Influences of superplasticizer , polymer latexes and asphalt emulsions on the pore structure and impermeability of hardened cementitious materials10.1016/j.conbuildmat.2013.11.104 ↗
2. Effect of colloidal polymers with different surface properties on the rheological property of fresh cement pastes10.1016/j.colsurfa.2017.01.067 ↗
3. Evaluation of natural rubber latex as film forming additive in cementitious mortar10.1016/j.conbuildmat.2017.12.098 ↗
4. Evaluation of properties and performance of rubber-modified concrete for recycling of waste scrap tire10.1016/j.jclepro.2017.02.046 ↗
5. Investigation on the interfacial behaviour between the rubber-cement matrix of the rubberized concrete10.1016/j.jclepro.2018.10.305 ↗
6. Properties of rubberized concrete modified by using silane coupling agent and carboxylated SBR10.1016/j.jclepro.2015.06.099 ↗
7. Preparation of composites of natural rubber latex-portland cement for moulds10.1002/(SICI)1097-0126(199804)45:4<339::AID-PI930>3.0.CO;2-T ↗
8. Super-plasticizer natural rubber latex modified concretes10.1016/0008-8846(88)90131-7 ↗
9. Influence of non-hydrocarbon substances on the compressive strength of natural rubber latex-modified concrete10.1016/j.conbuildmat.2011.07.054 ↗
10. Elastomeric effect of natural rubber latex on compressive strength of concrete at high temperatures10.1061/(ASCE)MT.1943-5533.0000338 ↗
11. Mechanical capabilities and fire endurance of natural rubber latex modified concrete10.1139/l11-035 ↗
12. Chemical resistance and water exclusion properties of natural rubber latex-modified concrete (NRL-MC)
13. Resistance of natural rubber latex modified lightweight concrete to chloride ingress
14. Effect of surface treatments and filler loading on the properties of hemp fiber/natural rubber composites10.1007/s10570-019-02611-w ↗
15. Effect of divalent metal ions on curing characteristics and dynamic mechanical properties of natural rubber10.1002/masy.201400050 ↗
16. Surface nanostructure of Hevea brasiliensis natural rubber latex particles10.1016/j.colsurfa.2011.09.021 ↗
17. Investigating the mechanistic and structural role of lipid hydrolysis in the stabilization of ammonia-preserved hevea rubber latex10.1021/acs.langmuir.8b02321 ↗
18. The majority of minerals present in natural rubber are associated with the macrogel: an ICP-MS and SEM/EDX investigation10.1002/app.43062 ↗
19. Elastomeric influence of natural rubber latex on cement mortar at high temperatures using thermal degradation analysis10.1016/j.conbuildmat.2010.11.006 ↗
20. Performance of natural rubber latex modified concrete in acidic and sulfated environments10.1016/j.conbuildmat.2011.12.099 ↗
21. Physical and mechanical properties of natural rubber modified cement paste10.1016/j.conbuildmat.2020.118319 ↗
22. Observation of phase transformations in cement during hydration10.1016/j.conbuildmat.2015.10.027 ↗
23. Early hydration and setting of Portland cement monitored by IR , SEM and Vicat techniques10.1016/j.cemconres.2009.01.017 ↗
24. Spectroscopic studies on indian portland cement hydrated with distilled water and sea water10.5923/j.fs.20110101.04 ↗
25. Hydration of cement composites containing large amount of waste materials10.1016/j.proeng.2013.04.009 ↗
26. Understanding the filler effect on the nucleation and growth of C-S-H10.1111/jace.13177 ↗
27. Insights into the mechanisms of nucleation and growth of C–S–H on fillers10.1617/s11527-017-1082-y ↗
28. 2019
29. Influence of the heterogeneity of waste from wet processing of ornamental stones on the performance of Portland cement composites10.1016/j.conbuildmat.2020.120036 ↗
30. Effect of alkalis content on calcium sulfoaluminate (CSA) cement hydration10.1016/j.cemconres.2019.105953 ↗
31. Crystal structure of tricalcium silicate from a Portland cement clinker and its application to quantitative XRD analysis
32. Investigation of the crystal structure of γ-CaSO4, CaSO4 · 0.5 H2O, and CaSO4 · 0.6 H2O by powder diffraction methods10.1006/jssc.1995.1260 ↗
33. Water channel structure of bassanite at high air humidity: crystal structure of CaSO4·0.625H2O10.1107/S0108768111041759 ↗
34. Crystal structure and hydration of belite Locality: synthetic
35. Structure du ferrite bicalcique et de la brownmillerite10.1107/S0365110X59000433 ↗
36. Primary minerals of the Jáchymov ore district | Primární minerály jáchymovského rudního revíru
37. Crystal structure of hillebrandite: a natural analogue of calcium silicate hydrate (CSH) phases in Portland cement10.2138/am-1995-7-820 ↗
38. The crystal structure of tricalcium aluminate, Ca3Al2O610.1107/S0567740875003639 ↗
39. Refined ettringite (Ca6Al2(SO4)3(OH)12∗26H2O) structure for quantitative X-ray diffraction analysis10.1154/1.2146207 ↗
40. Neutron powder diffraction in materials with incoherent scattering: an illustration of Rietveld refinement quality from nondeuterated gypsum10.1107/S0021889809043210 ↗
41. Hydrogen thermal motion in calcium hydroxide Ca (O H)210.1107/S0108768193003556 ↗
42. Ultrasonic-assisted conversion of limestone into needle-like hydroxyapatite nanoparticles10.1016/j.ultsonch.2018.04.002 ↗
43. Longer ozonolysis time induced CeO2 hexagonal nanostructures from nanocubes10.1016/j.matchemphys.2018.12.057 ↗
44. Research on the mechanism of polymer latex modified cement10.1016/j.conbuildmat.2016.02.117 ↗
45. Effect of polymer latexes with cleaned serum on the phase development of hydrating cement pastes10.1016/j.cemconres.2016.02.013 ↗
46. Asia Cement · 2019
47. Influence of polymer on cement hydration in SBR-modified cement pastes10.1016/j.cemconres.2006.05.020 ↗
48. Influence of SBR latex and HPMC on the cement hydration at early age
49. Studies in ancient gypsum based plasters towards their repair: mineralogy and microstructure10.1016/j.conbuildmat.2018.11.037 ↗
50. The role of pH in thaumasite sulfate attack10.1016/j.cemconres.2005.01.003 ↗
51. Preparation of α-calcium sulfate hemihydrate by reaction of sulfuric acid with lime10.1021/ie049316w ↗
52. Foaming characteristics and microstructure of aerated steel slag block prepared by accelerated carbonation10.1016/j.conbuildmat.2019.03.077 ↗
53. Waste to resource conversion of crumb rubber for production of sulphuric acid resistant concrete10.1016/j.conbuildmat.2018.11.040 ↗
54. Infrared spectroscopic studies of sodium dodecyl sulphate permeation and interaction with stratum corneum lipids in skin10.1111/j.1468-2494.2011.00678.x ↗
55. Adsorption of sodium dodecyl sulfate (SDS) at ZnSe and α-Fe2O3 surfaces: combining infrared spectroscopy and batch uptake studies10.1016/j.jcis.2010.04.011 ↗
56. Particle size reduction of polyaniline assisted by anionic emulsifier of sodium dodecyl sulphate (SDS) through emulsion polymerization10.1088/1757-899X/515/1/012080 ↗
57. Effects of carbonated hardened cement paste powder on hydration and microstructure of Portland cement10.1016/j.conbuildmat.2018.07.159 ↗
58. Determining cement composition by fourier transform infrared spectroscopy
59. Investigating natural rubber composition with Fourier Transform Infrared (FT-IR) spectroscopy: a rapid and non-destructive method to determine both protein and lipid contents simultaneously
60. Study of carbonation in a class G Portland cement matrix at supercritical and saturated environments10.1016/j.conbuildmat.2018.05.287 ↗
61. A Fourier transform infrared spectroscopic investigation of the early hydration of Portland cement and the influence of sodium lignosulfonate10.1016/S0008-8846(99)00243-4 ↗
62. Adsorption study of surfactants on natural rubber latex particles
63. Resistance of different types of concretes to cyclic sulfuric acid and sodium sulfate attack10.1016/j.cemconcomp.2010.07.002 ↗
64. Chemical, microbiological, and in situ test methods for biogenic sulfuric acid corrosion of concrete10.1016/S0008-8846(00)00219-2 ↗
65. Mindess · 2019
66. Development of polymer films by the coalescence of polymer particles in powdered and aqueous polymer-modified mortars10.1016/S0008-8846(02)01094-3 ↗
67. Compound effect of CaCO3 and CaSO4·2H2O on the strength of steel slag - cement binding materials10.1590/1980-5373-MR-2015-0387 ↗
68. Erosion resistance of high-strength concrete containing forta-ferro fibers against sulfuric acid attack with an optimum design10.1016/j.conbuildmat.2017.07.180 ↗
69. Retardation effect of styrene-acrylate copolymer latexes on cement hydration10.1016/j.cemconres.2015.04.014 ↗