journal article·2013-03Open access

Utilization of rice husk–bark ash to improve the corrosion resistance of concrete under 5-year exposure in a marine environment

W. Chalee, T. Sasakul, P. Suwanmaneechot, C. Jaturapitakkul

Abstract

Waste rice husk–bark ash was utilized to improve the durability of concrete in a marine environment. The effects of ground rice husk–bark ash (GRBA) on compressive strength, chloride diffusion coefficient, chloride binding capacity, and steel corrosion of concrete exposed to a marine site for 5 years were reported and discussed. The GRBA was used as a pozzolanic material to replace Type I Portland cement at 0%, 15%, 25%, 35%, and 50% by weight of the binder. Concrete cube specimens of 200 mm were cast, and steel bars were embedded in concrete. Concrete specimens were exposed to a tidal zone of seawater in the Gulf of Thailand. After 5-year exposure, the specimens were tested for compressive strength, acid soluble and water soluble chlorides and corrosion of embedded steel bar. The results showed that during 5-year exposure, GRBA concretes gained strength faster than Type I Portland cement concretes and no strength loss was found in GRBA concrete. The findings also indicated that the durability of concrete in terms of chloride diffusion coefficient, chloride binding capacity, and resistance to corrosion of embedded steel could be considerably improved by utilizing GRBA as high as 35%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Inuence of rice husk bark ash on mechanical properties of concrete containing high amount of recycled aggregates10.1016/j.conbuildmat.2007.05.004 ↗
2. Effect of W/B ratios on pozzolanic reaction of biomass ashes in Portland cement matrix10.1016/j.cemconcomp.2011.09.003 ↗
3. Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete10.1016/j.conbuildmat.2005.09.011 ↗
4. Strength and water permeability of concrete containing palm oil fuel ash and rice husk–bark ash10.1016/j.conbuildmat.2006.06.015 ↗
5. Influence of mineral admixtures on the mechanical properties and corrosion of steel embedded in high strength concrete10.1016/S0167-577X(02)01136-9 ↗
6. Chloride-induced steel corrosion in concrete; part. 1 corrosion rates, corrosion activity, and attack areas
7. Effect of fly ash fineness on compressive strength and pore size of blended cement paste10.1016/j.cemconcomp.2004.07.003 ↗
8. Strength and chloride resistance of blended Portland cement mortar containing palm oil fuel ash and fly ash10.1016/S1674-4799(09)60083-2 ↗
9. Durability of recycled aggregate concrete using pozzolanic materials10.1016/j.wasman.2007.03.003 ↗
10. Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume10.1016/0958-9465(95)00005-W ↗
11. Effect of W/B ratios and fly ash finenesses on chloride diffusion coefficient of concrete in marine environment10.1617/s11527-008-9398-2 ↗
12. Predicting the chloride penetration of fly ash concrete in seawater10.1016/j.marstruc.2008.12.001 ↗
13. Effect of W/C ratio on covering depth of fly ash concrete in marine environment10.1016/j.conbuildmat.2006.03.002 ↗
14. Utilization of fly ash concrete in marine environment for long term design life analysis10.1016/j.matdes.2009.09.024 ↗
15. Performance of pfa concrete in a marine environment–10-year results10.1016/S0958-9465(02)00117-8 ↗
16. ACI 211.1-91. Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete. ACI Committee 211, American Concrete Institute, Farmington Hills, MI 48333–9094; 1991.
17. ASTM C192/C 192M-06. Standard practice for making and curing concrete test specimens in the laboratory. Annual Book of ASTM Standards, vol. 04.02; 2006.
18. ASTM C1152. Standard test method for acid-soluble chloride in mortar and concrete. Annual Book of ASTM Standards, vol. 04.02; 2008.
19. ASTM C1218. Standard test method for water-soluble chloride in mortar and concrete. Annual Book of ASTM Standards, vol. 04.01; 1997.
20. Compressive strength of HPC containing CNI and fly ash after long-term exposure to a marine environment10.1016/j.cemconcomp.2011.08.007 ↗
21. Packing effect and pozzolanic reaction of fly ash in mortar
22. Properties of high-volume fly ash concrete incorporating nano-SiO2
23. Damage to reinforced concrete due to reinforcement corrosion10.1016/0950-0618(95)00033-C ↗
24. Crank · 1975
25. Influence of fly ash fineness on the chloride penetration of concrete10.1016/j.conbuildmat.2005.08.010 ↗
26. Resistance to chloride penetration of blended Portland cement mortar containing palm oil fuel ash, rice husk ash and fly ash10.1016/j.conbuildmat.2006.12.001 ↗
27. Long term performance of chloride binding capacity in fly ash concrete in a marine environment10.1016/j.conbuildmat.2009.12.039 ↗
28. Neville AM. Properties of concrete. 4th and final ed. London: Longman’s; 1995. p. 571–72.
29. The role of hydrotalcite in chloride binding and corrosion protection in concretes with ground granulated blast furnace slag10.1016/j.cemconcomp.2012.04.009 ↗
30. Effect of cement type on chloride binding and corrosion of steel in concrete
31. Studies of chloride binding in concrete exposed in a marine environment
32. A study of the effect of chloride binding on service life predictions
33. Effect of grinding on chemical and physical properties of rice husk ash10.1016/S1674-4799(09)60041-8 ↗
34. ACI 201.2R-01. Guide to durable concrete. ACI Committee 201, American Concrete Institute, Farmington Hills, MI 48333–9094, 2003.
35. The binding of chloride ions by pozzolanic product in fly ash cement blends10.1680/adcr.1989.2.7.121 ↗
36. Broomfield · 1996