journal article·2014-10

Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages

N.K. Lee, J.G. Jang, H.K. Lee

Publisher page

Abstract

Abstract The purpose of this study is to investigate the shrinkage characteristics of alkali-activated fly ash/slag (henceforth simply AFS) and the factors affecting it. A series of tests were conducted to determine the chemical shrinkage, autogenous shrinkage and drying shrinkage. The microstructures and reaction products were also characterized through XRD and SEM/EDS analyses. An increase in the slag content from 10% to 30% resulted in a denser matrix and showed a higher Ca/Si ratio of C–N–A–S–H in the microstructure. Higher sodium silicate and slag contents in a mixture caused more chemical, autogenous, and drying shrinkage, but led to a higher compressive strength. From the test results, it can be concluded that the autogenous shrinkage of AFS mortar occurs mainly due to self-desiccation in hardened state rather than volume contraction by chemical shrinkage in fresh state. The AFS paste showed higher drying shrinkage than ordinary Portland cement (OPC), which may be caused by the higher mesopore volume of the AFS paste compared to that of OPC paste.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Alkali activation of Australian slag cements10.1016/S0008-8846(98)00170-7 ↗
2. Effect of admixtures on properties of alkali-activated slag concrete10.1016/S0008-8846(00)00349-5 ↗
3. Chemical shrinkage of cement pastes and mortars at very early age: effect of limestone filler and granular inclusions10.1016/j.cemconcomp.2007.06.004 ↗
4. The hydration of slag, part 1: reaction models for alkali-activated slag10.1007/s10853-006-0873-2 ↗
5. Effect of pore size distribution on drying shrinkage of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
6. Microcracking and strength development of alkali activated slag concrete10.1016/S0958-9465(01)00003-8 ↗
7. Properties and durability of alkali-activated slag concrete
8. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
9. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
10. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗
11. Geiker M. Studies of Portland cement hydration: measurements of chemical shrinkage and a systematic evaluation of hydration curves by means of the dispersion model. PhD thesis, Technical University of Denmark; 1983.
12. Hydration of alkali-activated slag: comparison with ordinary Portland cement10.1680/adcr.2006.18.3.119 ↗
13. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag – Part I: effect of MgO10.1016/j.cemconres.2011.05.002 ↗
14. Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags10.1016/j.cemconres.2010.11.016 ↗
15. Hardjito D, Rangan BV. Development and properties of low-calcium fly ash-based geopolymer concrete. Research Report GC1, Perth: Faculty of Engineering, Curtin University of Technology; 2005.
16. Strength and setting times of low calcium fly ash based geopolymer mortar10.5539/mas.v2n4p3 ↗
17. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash10.1016/j.cemconcomp.2013.09.006 ↗
18. Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers10.1016/j.conbuildmat.2013.09.048 ↗
19. Jiang W, Silsbee MR, Roy DM. Alkali activation reaction mechanism and its influences on microstructure of slag cement. In: Proceedings of the 10th international congress on the chemistry of cement. Gothenburg, Sweden; 1997. 3:9.
20. Autogenous relative humidity change an autogenous shrinkage of high-performance cement pastes10.1016/j.cemconres.2004.06.028 ↗
21. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗
22. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer10.1007/s10853-009-3934-5 ↗
23. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
24. Alkali-activated, cementless, controlled low-strength materials (CLSM) utilizing industrial by-products10.1016/j.conbuildmat.2013.09.002 ↗
25. Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature10.1016/j.conbuildmat.2013.05.107 ↗
26. A review: the comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements10.1016/j.cemconres.2010.03.020 ↗
27. Influence of slag as additive on compressive strength of fly ash-based geopolymer10.1061/(ASCE)0899-1561(2007)19:6(470) ↗
28. Microscopy and microanalysis of inorganic polymer cements. 1: Remnant fly ash particles10.1007/s10853-008-3077-0 ↗
29. SUSTAINABILITY-introduction: sustainable development and concrete technology-some goals of ACI’s board task group on sustainable development
30. Drying and autogenous shrinkage of pastes and mortars with activated slag cement10.1016/j.cemconres.2007.11.002 ↗
31. Mindess · 2008
32. Early-age autogenous cracking of cementitious matrices: physico-chemical analysis and micro/macro investigations10.1617/s11527-010-9663-z ↗
33. Alkali-activated binders: a review: Part 1. Historical background, terminology, reaction mechanisms and hydration products10.1016/j.conbuildmat.2007.10.015 ↗
34. Effect of shrinkage-reducing admixtures on the properties of alkali-activated slag mortars and pastes10.1016/j.cemconres.2006.11.021 ↗
35. Alkali-activated fly ashes – a cement for the future10.1016/S0008-8846(98)00243-9 ↗
36. Role of slag in microstructural development and hardening of fly ash-slag geopolymer10.1016/j.cemconres.2012.10.004 ↗
37. Mitigation of autogenous shrinkage in alkali activated slag mortars by internal curing10.1617/s11527-012-9978-z ↗
38. Measurement of volume change in cementitious materials at early ages: review of testing protocols and interpretation of results10.1177/0361198106197900104 ↗
39. Strength, pore structure and permeability of alkali-activated slag mortars10.1016/S0008-8846(96)00174-3 ↗
40. Some factors affecting early hydration of alkali-slag cements10.1016/S0008-8846(96)85031-9 ↗
41. Taylor · 1997
42. On the equilibrium of vapour at a curved surface of liquid10.1080/14786447108640606 ↗
43. The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers10.1016/S1385-8947(02)00025-6 ↗
44. Alkali-activated slag cement and concrete: a review of properties and problems10.1680/adcr.1995.7.27.93 ↗
45. Hydration products of alkali activated slag cement10.1016/0008-8846(95)00045-E ↗
46. Wallah SE, Rangan BV. Low-calcium fly ash-based geopolymer concrete: long term properties. Research Report GC2. Perth: Faculty of Engineering, Curtin University of Technology; 2006.
47. Drying shrinkage of heat-cured fly ash-based geopolymer concrete10.5539/mas.v3n12p14 ↗
48. The geopolymerisation of aluminosilicate minerals10.1016/S0301-7516(99)00074-5 ↗
49. Microanalysis of calcium silicate hydrate gel formed within a geopolymer binder10.1023/A:1025904905176 ↗
50. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation10.1016/j.cemconres.2004.10.042 ↗
51. Preliminary study on combined-alkali-slag paste materials10.1016/S0008-8846(00)00269-6 ↗