Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix

Abstract An appropriate dispersion of carbon nanotubes (CNTs) is a prerequisite for their use in improving the mechanical properties of cement-based composites. In this study two types of carbon nanotubes (CNTs) having different morphologies were investigated. To obtain a uniform distribution of CNTs in the cement matrix, the effect of sonication on the deagglomeration of CNTs in combination with anionic and nonionic surfactants in varying concentrations was quantitatively investigated when preparing aqueous dispersions of CNTs for the subsequent use in cement paste. The relationships between the quality of CNT-dispersion on the one hand and the sonication time and surfactant concentration on the other were determined using UV–vis spectroscopy. After dispersion, nitrogen-doped CNTs were found mostly as individual, broken CNTs. In contrast, after the treatment of the mixture of single-, double-, and multi-walled CNTs, a net-like distribution was observed where destruction of the CNTs due to sonication could not be distinguished. Modification of the cement pastes with dispersions of CNTs led to a pronounced increase, up to 40%, in compressive strength and, in some cases, to a moderate increase in tensile strength under high strain-rate loading. However, no significant improvement in strength was observed for quasi-static loading. Microscopic examination revealed that the bridging of the C–S–H phases differed depending on the type of CNT. This explained, at least partly, the observed effects of CNT-addition on the mechanical properties of hardened cement pastes.