Effect of silica fume on mechanical properties of high-strength concrete
Source abstract
Abstract
Abstract This paper presents the results of experimental work on short- and long-term mechanical properties of high-strength concrete containing different levels of silica fume. The aim of the study was to investigate the effects of binder systems containing different levels of silica fume on fresh and mechanical properties of concrete. The work focused on concrete mixes having a fixed water/binder ratio of 0.35 and a constant total binder content of 500 kg/m3. The percentages of silica fume that replaced cement in this research were: 0%, 6%, 10% and 15%. Apart from measuring the workability of fresh concrete, the mechanical properties evaluated were: development of compressive strength; secant modulus of elasticity; strain due to creep, shrinkage, swelling and moisture movement. The results of this research indicate that as the proportion of silica fume increased, the workability of concrete decreased but its short-term mechanical properties such as 28-day compressive strength and secant modulus improved. Also the percentages of silica fume replacement did not have a significant influence on total shrinkage; however, the autogenous shrinkage of concrete increased as the amount of silica fume increased. Moreover, the basic creep of concrete decreased at higher silica fume replacement levels. Drying creep (total creep − basic creep) of specimens was negligible in this investigation. The results of swelling tests after shrinkage and creep indicate that increasing the proportion of silica fume lowered the amount of expansion. Because the existing models for predicting creep and shrinkage were inaccurate for high-strength concrete containing silica fume, alternative prediction models are presented here.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Holt EE. Autogenous shrinkage at very early ages. Proceedings, International Workshop on Autogenous Shrinkage of Concrete, Japan Concrete Institute, Hiroshima, June 1998. p. 133–40
2. Tensile properties of early age concrete
3. ACI Committee 209. Prediction of creep, shrinkage and temperature effects in concrete structures. ACI Manual of concrete practice, Part 1, 1997, 209R 1-92
4. CEB-FIP Model Code for Concrete Structures 1990. Evaluation of the time dependent behavior of concrete. Bulletin d'Information No. 199. Lausanne: Comite European du Beton/Federation Internationale de la Precontrainte; 1991
5. JCI Committee Report, Technical Committee on Autogenous Shrinkage of Concrete. In: Proceedings of International Workshop on Autogenous Shrinkage of Concrete. Hiroshima: Japan Concrete Institute; June 1998. p. 5–64
6. Accelerated determination of creep of lightweight aggregate concrete
7. Effect of different supplementary cementitious materials on mechanical properties of high performance concrete10.1016/0008-8846(94)00128-L ↗
8. Factors influencing strength development of concrete containing silica fume10.1016/0008-8846(95)00150-B ↗
9. Neville · 1990
10. Concrete Society. Microsilica in concrete. Technical Report No. 41, TR.041. Wexham, Slough: The Concrete Society; 1993
11. ACI Committee 318. Building code requirements for reinforced concrete. American Concrete Institute; 1995
12. How admixtures affect shrinkage and creep
13. Are current concrete strength tests suitable for high strength concrete?10.1007/BF02473073 ↗
14. Influence of silica fume replacement of cement on expansion and drying shrinkage10.1016/S0008-8846(98)00127-6 ↗
15. Shrinkage of concrete exposed to hot and arid climate10.1061/(ASCE)0899-1561(1999)11:1(66) ↗
16. Shah · 1994
17. Neville · 1983
18. Influence of key parameters on drying shrinkage of cementitious materials10.1016/S0008-8846(99)00156-8 ↗
19. De Larrard F, Ithurralde G, Acker P, Chauvel D. High performance concrete for a nuclear containment. Proceedings, Second International Symposium on Utilization of High-Strength Concrete, Berkley, ACI SP; 1990. p. 121–7
20. Persson BSM. Shrinkage of high performance concrete. Proceedings, International Workshop on Autogenous Shrinkage of Concrete. Hiroshima: Japan Concrete Institute; June 1998. p. 101–18
21. Le Roy R, De Larrard F. Creep and shrinkage of high-performance concrete: the LCPC experience. The Fifth International RILEM Symposium on Creep and Shrinkage of Concrete. London: E & FN Spon; 1993. p. 499–504
22. Influence of temperature on autogenous deformation and relative humidity change in hardening cement paste10.1016/S0008-8846(99)00021-6 ↗
23. Mak SL, Ritchie D, Taylor A, Diggins R. Temperature effects on early age autogenous shrinkage in high performance concretes. Proceedings, International Workshop on Autogenous Shrinkage of Concrete. Hiroshima: Japan Concrete Institute; June 1998. p. 153–62
24. Sellevold EJ. The function of silica fume in high strength concrete. Proceedings of International Conference on Utilization of High Strength Concrete, Stavanger, Norway; 1987. p. 39–50
25. Brooks JJ, Cabrera JG, Megat Johari MA. Factors affecting the autogenous shrinkage of silica fume high-strength concrete. Proceedings, International Workshop on Autogenous Shrinkage of Concrete. Hiroshima: Japan Concrete Institute; June 1998. p. 185–92
26. Autogenous deformation and change of relative humidity in silica fume-modified cement paste
27. Autogenous shrinkage stress of ultra-high-strength concrete caused by resistant of reinforcement
28. Aitcin P-C. Autogenous shrinkage measurement. Proceedings, International Workshop on Autogenous Shrinkage of Concrete. Hiroshima: Japan Concrete Institute; June 1998. p. 245–56
29. Hydration kinetics, change of relative humidity, and autogenous shrinkage of ultra-high-strength concrete10.1016/S0008-8846(99)00022-8 ↗
30. Control of plastic shrinkage cracking with specialty cellulose fibers
31. Application of recycled tyre cord in concrete for shrinkage crack control10.1007/BF00275355 ↗
32. Effect of low modulus sisal and polypropylene fibre on the free and restrained shrinkage of mortar at early age10.1016/S0008-8846(99)00136-2 ↗
33. Effect of fiber addition on the autogenous shrinkage of silica fume concrete
34. Restrained shrinkage cracking in fiber reinforced concrete: a novel test technique10.1016/0008-8846(95)00186-7 ↗
35. RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete
36. Hori A, Morioka M, Sakai E, Daimon M. Influence of expansive additives on autogenous shrinkage. Proceedings, International Workshop on Autogenous Shrinkage of Concrete. Hiroshima: Japan Concrete Institute; June 1998. p. 177–84
37. Expansive admixtures (mainly ettringite)10.1016/S0958-9465(97)00064-4 ↗
38. Effects of artificial lightweight aggregate on autogenous shrinkage of concrete10.1016/S0008-8846(98)00202-6 ↗
39. Influence of constituents and composition on autogenous shrinkage of cementitious materials10.1680/macr.1997.49.178.15 ↗
40. Possibilities to control concrete shrinkage by means of chemical admixtures10.2533/chimia.1998.208 ↗
41. Quasi-instantaneous and long-term deformations of high performance concrete with sealed curing10.1016/S1065-7355(98)00004-2 ↗
42. What do we know about the plastic deformation and creep of concrete?
43. L'Hermite R. Volume changes of concrete. Proceedings, Fourth International Symposium on the Chemistry of Cement, NBS, Washington, DC; 1960. Paper V-3. p. 659–702
44. Strength development and drying shrinkage of high-strength concretes10.1016/0958-9465(96)00024-8 ↗
45. New water permeability test scheme for concrete