Tensile behavior of Ultra High Performance Hybrid Fiber Reinforced Concrete
Source abstract
Abstract
Abstract The effects of blending fibers on the tensile behavior of Ultra High Performance Hybrid Fiber Reinforced Concrete (UHP-HFRC) are investigated. Four types of steel macro-fibers (of differing length or geometry) and one type of steel micro-fiber are considered. In producing the specimens, the volume content of the macro-fiber was held at 1.0%, whereas the volume content of the micro-fiber varied from 0.0% to 1.5%. The overall shape of tensile stress–strain curves of UHP-HFRC is primarily dependent upon the type of macro-fiber, although the addition of micro-fibers favorably affects the strain hardening and multiple cracking behaviors. UHP-HFRC produced from macro-fibers with twisted geometry provides the best performance with respect to post cracking strength, strain capacity and multiple micro-cracking behavior, whereas UHP-HFRC produced with long, smooth macro-fibers exhibits the worst performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Behloul M, Bernier G, Cheyrezy M. Tensile behavior of reactive powder concrete (RPC). In: Proceedings of the 4th international symposium on utilization of HSC/HPC, BHP’96, Paris, vol. 3; 1996. p. 1375–81.
2. CARDIFRC–Development and mechanical properties. Part III: Uniaxial tensile response and other mechanical properties10.1680/macr.2005.57.8.433 ↗
3. Boulay C, Rossi P, Tailhan JL. Uniaxial tensile test on a new cement composite having a hardening behavior. In: Proceeding of Sixth RILEM symposium in fiber-reinforced concretes (FRC), BEFIB, Varenna, Italy; 2004.
4. Chanvillard G, Rigaud S. Complete characterization of tensile properties of DUCTAL® UHP-FRC according to the French recommendations. In: Proceeding of fourth international workshop on high performance fiber reinforced cement composites (HPFRCC4). Ann Arbor, MI, USA; 2003.
5. High Performance fiber-reinforced cementitious composite (CARDIFRC) – performance and application to retrofitting10.1016/j.engfracmech.2006.01.023 ↗
6. Fehling E, Schmidt M, Geisenhanslueke C, Editor. International symposium on ultra high performance concrete, Kassel, (Schriftenreihe Baustoffe und Massivbau 3); 2004.
7. Fehling E, Schmidt M, Stuerwald S, editor. Second international symposium on ultra high performance concrete, Kassel, (Schriftenreihe Baustoffe und Massivbau 10); 2008.
8. Cylinder or cube: strength testing of 80 to 200Mpa (116 to 29ksi) Ultra-High-Performance-Fiber-Reinforced Concrete
9. Jungwirth J, Muttoni A. Structural behavior of tension members in Ultra High Performance Concrete. In: International symposium on ultra high performance concrete, Kassel; 2004. p.553–46.
10. Kim DJ, El-Tawil S, Naaman AE. Correlation between single fiber pullout behavior and tensile response of FRC composites with high strength steel fiber. In: Naaman AE, Reinhardt HW, co-editors. Proceeding of fifth international symposium on high performance fiber reinforced cementitious composites, Mainz, Germany; 2007, pp. 67–76.
11. Kim DJ, El-Tawil S, Naaman AE. Effect of matrix strength on pullout behavior of high strength deformed steel fibers. In: Parra-Montesinos GJ, Balaguru P, editors. ACI special publication 2010; SP 72, Antoine E. Naaman symposium – four decades of progress in prestressed concrete, fiber reinforced concrete, and thin laminate composites; 2010. p. 135–50.
12. Kim DJ, Naaman AE, El-Tawil S., High tensile strength strain-hardening FRC composites with less than 2% fiber content. In: Fehling E, Schmidt M, Stűrwald S, co-editors, Proceeding of second international symposium on ultra high performance concrete, Germany, Kassel University, Germany; 2008, p. 169–76.
13. Behavior of high performance fiber reinforced cement composites under multi-axial compressive loading10.1016/j.cemconcomp.2009.09.003 ↗
14. Maeder U, Lallemant-Gamboa I, Chaignon J, Lombard JP, Ceracem, a new high performance concrete: characterizations and applications. In: Fehling E, Schmidt M, Stűrwald S, co-editors, Proceeding of first international symposium on ultra high performance concrete, Kassel University, Germany; 2004. p. 59–68.
15. Markovic I. High-Performance Hybrid-Fibre Concrete–Development and Utilization, Ph.D. thesis, Technische Universität Delft; 2006.
16. Naaman · 2000
17. Naaman AE, Reinhardt HW. Characterization of high performance fiber reinforced cement composites. In: Naaman AE, Reinhardt HW, co-editors. Proceeding of second international symposium on high performance fiber reinforced cementitious composites; 1996. p. 1–24.
18. Naaman AE. A Statistical Theory of Strength for Fiber Reinforced Concrete, Ph.D. thesis, Massachusetts Institute of Technology; 1972. p. 196.
19. Park JJ, Kang ST, Koh KT, Kim SW. Influence of the ingredients on the compressive strength of UHPC as a fundamental study to optimize the mixing proportion. In: Fehling E, Schmidt M, Stűrwald S, co-editors. Proceeding of second international symposium on ultra high performance concrete, Germany, Kassel University, Germany; 2008. p. 105–12.
20. Bending and compressive behaviors of a new cement composite10.1016/j.cemconres.2004.05.043 ↗
21. High performance multimodal fiber reinforced cement composite (HPMFRCC): the LCPC experience
22. Evaluation of flexural performance in UHPC (Ultra High Performance Concrete) according to placement methods
23. Ultra-high performance concrete with compressive strength exceeding 150MPa (22ksi): a simpler way
24. Strain hardening UHP-FRC with low fiber contents10.1617/s11527-010-9650-4 ↗
25. Wuest J, Denarie E, Bruehwiler E. Model for predicting the UHP-FRC tensile hardening response. In: Fehling E, Schmidt M, Stűrwald S, co-editor. Proceeding of second international symposium on ultra high performance concrete, Germany. Kassel University, Germany; 2008. p. 153–60.