Mechanical behaviour of concrete made with fine recycled concrete aggregates
Source abstract
Abstract
This paper concerns the use of fine recycled concrete aggregates to partially or globally replace natural fine aggregates (sand) in the production of structural concrete. To evaluate the viability of this process, an experimental campaign was implemented in order to monitor the mechanical behaviour of such concrete. The results of the following tests are reported: compressive strength, split tensile strength, modulus of elasticity and abrasion resistance. From these results, it is reasonable to assume that the use of fine recycled concrete aggregates does not jeopardize the mechanical properties of concrete, for replacement ratios up to 30%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Influence of recycled aggregates on mechanical properties of HS/HPC10.1016/S0958-9465(01)00012-9 ↗
2. Properties of concrete incorporating fine recycled aggregate10.1016/j.cemconres.2004.06.017 ↗
3. Evaluation of the mechanical properties of concrete made with aggregates recycled from construction and demolition waste
4. Task Force of the Standing Committee of Concrete, Draft of Spanish regulations for the use of recycled aggregate in the production of structural concrete. Use of recycled materials in buildings and structures. In: RILEM proceedings 40, Barcelona, November, 2004. p. 511–25.
5. Recycled aggregate for reinforced concrete?
6. Kasai Y. Guidelines and the present state of the reuse of demolished concrete in Japan. Demolition and reuse of concrete and masonry. In: RILEM proceedings 23, Odense, 1993, p. 93–104.
7. ACI committee 555 · 2001
8. Faury · 1958
9. Neville · 1995
10. Wainwright PJ et al. Modifying the performance of concrete made with coarse and fine recycled concrete aggregates. Demolition and reuse of concrete and masonry. In: RILEM proceedings 23, Odense, 1993. p. 319–30.
11. Merlet JD, Pimienta P. Mechanical and physico-chemical properties of concrete produced with coarse and fine recycled concrete aggregates. Demolition and reuse of concrete and masonry. In: RILEM proceedings 23, Odense, 1993. p. 343–53.
12. NP EN 12390-3. Testing hardened concrete. Part 3: compressive strength of test specimens, 2003, IPQ.
13. NP EN 12390-6. Testing hardened concrete. Part 6: tensile splitting strength of test specimens, 2003, IPQ.
14. LNEC E 397 · 1993
15. DIN 52108. Testing of inorganic non-metallic materials: wear test with the grinding wheel according to Boehme, 2002.
16. Properties of concrete made with recycled aggregate from partially hydrated old concrete10.1016/S0008-8846(02)01033-5 ↗
17. Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete10.1016/S0008-8846(03)00186-8 ↗
18. The influence of retained moisture in aggregates from recycling on the properties of new hardened concrete10.1016/S0956-053X(96)00033-5 ↗
19. Coutinho · 1994 · vol. III
20. An equation to estimate the modulus of elasticity of concrete with recycled aggregates
21. Mechanical behaviour of non-structural concrete made with recycled ceramic aggregates10.1016/j.cemconcomp.2004.07.005 ↗