Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash
Source abstract
Abstract
Abstract The microstructural evolution of alkali-activated binders based on blast furnace slag, fly ash and their blends during the first six months of sealed curing is assessed. The nature of the main binding gels in these blends shows distinct characteristics with respect to binder composition. It is evident that the incorporation of fly ash as an additional source of alumina and silica, but not calcium, in activated slag binders affects the mechanism and rate of formation of the main binding gels. The rate of formation of the main binding gel phases depends strongly on fly ash content. Pastes based solely on silicate-activated slag show a structure dominated by a C–A–S–H type gel, while silicate-activated fly ash are dominated by N–A–S–H ‘geopolymer’ gel. Blended slag-fly ash binders can demonstrate the formation of co-existing C–A–S–H and geopolymer gels, which are clearly distinguishable at earlier age when the binder contains no more than 75 wt.% fly ash. The separation in chemistry between different regions of the gel becomes less distinct at longer age. With a slower overall reaction rate, a 1:1 slag:fly ash system shares more microstructural features with a slag-based binder than a fly ash-based binder, indicating the strong influence of calcium on the gel chemistry, particularly with regard to the bound water environments within the gel. However, in systems with similar or lower slag content, a hybrid type gel described as N–(C)–A–S–H is also identified, as part of the Ca released by slag dissolution is incorporated into the N–A–S–H type gel resulting from fly ash activation. Fly ash-based binders exhibit a slower reaction compared to activated-slag pastes, but extended times of curing promote the formation of more cross-linked binding products and a denser microstructure. This mechanism is slower for samples with lower slag content, emphasizing the correct selection of binder proportions in promoting a well-densified, durable solid microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
2. Technical and commercial progress in the adoption of geopolymer cement10.1016/j.mineng.2011.09.009 ↗
3. Chemical research and climate change as drivers in the commercial adoption of alkali activated materials10.1007/s12649-010-9015-9 ↗
4. Alkali activation of Australian slag cements10.1016/S0008-8846(98)00170-7 ↗
5. Effect of the alkali metal activator on the properties of fly ash-based geopolymers10.1021/ie980804b ↗
6. Alkali-activated cements: opportunities and challenges10.1016/S0008-8846(98)00093-3 ↗
7. Alkali-activated fly ashes: A cement for the future10.1016/S0008-8846(98)00243-9 ↗
8. Hydration of alkali-activated slag: comparison with ordinary Portland cement10.1680/adcr.2006.18.3.119 ↗
9. Structural evolution of fly ash based geopolymers in alkaline environments10.1021/ie0707671 ↗
10. The characterization of hardened alkali-activated blast-furnace slag pastes and the nature of the calcium silicate hydrate (C-S-H) phase10.1016/0008-8846(94)90002-7 ↗
11. A model for the C–A–S–H gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗
12. Sodium silicate-based, alkali-activated slag mortars: Part I. Strength, hydration and microstructure10.1016/S0008-8846(02)00717-2 ↗
13. Chloride diffusion in ordinary, blended, and alkali-activated cement pastes and its relation to other properties10.1016/S0008-8846(00)00406-3 ↗
14. Sulfate attack on alkali-activated slag concrete10.1016/S0008-8846(01)00659-7 ↗
15. Structure and strength of NaOH activated concretes containing fly ash or GGBFS as the sole binder10.1016/j.cemconcomp.2010.03.007 ↗
16. Engineering and durability properties of concretes based on alkali-activated granulated blast furnace slag/metakaolin blends10.1016/j.conbuildmat.2012.01.017 ↗
17. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗
18. The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers10.1016/j.cemconres.2009.10.010 ↗
19. Lloyd R.R. The durability of inorganic polymer cements, PhD thesis. University of Melbourne; 2008.
20. Cementitious composites of pulverised fuel ash and blast furnace slag activated by sodium silicate: effect of Na2O concentration and modulus10.1179/174367606X120151 ↗
21. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer10.1007/s10853-009-3934-5 ↗
22. Role of slag in microstructural development and hardening of fly ash-slag geopolymer10.1016/j.cemconres.2012.10.004 ↗
23. X-ray microtomography shows pore structure and tortuosity in alkali-activated binders10.1016/j.cemconres.2012.03.004 ↗
24. Mechanical property and structure of alkali-activated fly ash and slag blends
25. Characterization of aged slag concretes
26. Hydration products of alkali activated slag cement10.1016/0008-8846(95)00045-E ↗
27. Mineralogical and microstructural characterisation of alkali-activated fly ash/slag pastes10.1016/S0958-9465(02)00059-8 ↗
28. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag - Part I: Effect of MgO10.1016/j.cemconres.2011.05.002 ↗
29. Mechanical performance and hydration mechanism of geopolymer composite reinforced by resin10.1016/j.msea.2010.06.069 ↗
30. High-resolution X-ray diffraction and fluorescence microscopy characterization of alkali-activated slag-metakaolin binders10.1111/jace.12247 ↗
31. Compressive strength and microstructural characteristics of class C fly ash geopolymer10.1016/j.cemconcomp.2009.11.003 ↗
32. Geopolymeric materials prepared using Class F fly ash and elevated temperature curing10.1016/j.cemconres.2004.06.031 ↗
33. Effect of nanosilica-based activators on the performance of an alkali-activated fly ash binder10.1016/j.cemconcomp.2012.08.025 ↗
34. Preparation and characterization of analcime powders by X-ray and SEM analyses
35. Alkaline activation of metakaolin–fly ash mixtures: obtain of zeoceramics and zeocements10.1016/j.micromeso.2007.03.024 ↗
36. An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash10.1016/j.cemconres.2007.01.013 ↗
37. Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing10.1016/j.cemconres.2006.03.022 ↗
38. Accelerated ageing of geopolymers
39. FTIR quantitative analysis of calcium carbonate (calcite) and silica (quartz) mixtures using the constant ratio method. Application to geological samples10.1016/S0039-9140(02)00372-7 ↗
40. Gadsden · 1975
41. Dehydration and structural development of mullite precursors: an FTIR spectroscopic study10.1016/S0955-2219(01)00265-5 ↗
42. Gel nanostructure in alkali-activated binders based on slag and fly ash and effects of accelerated carbonation10.1016/j.cemconres.2013.06.007 ↗
43. Effect on fresh C–S–H gels of the simultaneous addition of alkali and aluminium10.1016/j.cemconres.2009.08.004 ↗
44. DTA-TGA and FTIR spectroscopies of sol-gel hydrotalcites: aluminum source effect on physicochemical properties10.1016/S0167-577X(96)00296-0 ↗
45. Alkali activation of fly ash: Effect of the SiO2/Na2O ratio. Part I: FTIR study10.1016/j.micromeso.2007.02.055 ↗
46. Mechanical and thermal characterisation of geopolymers based on silicate-activated metakaolin/slag blends10.1007/s10853-011-5490-z ↗
47. Activation of metakaolin/slag blends using alkaline solutions based on chemically modified silica fume and rice husk ash10.1007/s12649-011-9093-3 ↗
48. The use of thermal analysis in assessing the effect of temperature on a cement paste10.1016/j.cemconres.2004.06.015 ↗
49. Hydration studies of modified OPC pastes by differential scanning calorimetry and thermogravimetry10.1007/BF01915514 ↗
50. Microstructural, physical, and thermal analyses of Portland cement–fly ash–calcium hydroxide blended pastes10.1007/s10973-009-0491-8 ↗
51. Drying-induced changes in the structure of activated pastes10.1007/s10853-013-7152-9 ↗
52. Thermal analysis of fly ash-based zeolites10.1023/B:JTAN.0000033195.15101.4e ↗
53. Microscopy and microanalysis of inorganic polymer cements. 1: Remnant fly ash particles10.1007/s10853-008-3077-0 ↗
54. Hydration products and reactivity of blast-furnace slag activated by various alkalis10.1111/j.1151-2916.2003.tb03623.x ↗
55. Compatibility studies between N–A–S–H and C–A–S–H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗