journal article·2022-12-14

Synthesis of composite graphitic scaffolds using polysaccharide precursors

Fabian Villalobos, Andrew Patalano, Steven Herrera, Ryan Wu, Daisy Patino, Pedro A. Peña, Evan Jauregui, Amir-Ali Akhavi, William Coley, Andre Mkhoyan, Mihrimah Ozkan, Cengiz S. Ozkan

Journal of Materials Research· Volume 37· Issue 23
Publisher page

Abstract

We describe a method for synthesizing porous carbon scaffolds embedded with metal particles. An analysis of the growth mechanism by esterification of polysaccharides at low pH is conducted. Iron-nitrate precursors nucleate iron particles via oxidative process when annealed under a reducing atmosphere and embedded within a porous carbon matrix. The process was then applied to other metal nitrates (Co, Ni, Cu, Ag, and Al). Co and Ni nanoparticles exhibited an encapsulating graphitic layer while Cu, Ag, and Al nanoparticles did not. A potential mechanism by which graphitic encapsulation takes place in Fe, Co, and Ni is suggested by comparison to phase separation during the growth of carbon nanotubes from catalytic metal nanoparticles. This flexible method for synthesizing composite porous carbon scaffolds with metal nanoparticles is achievable using cheap, environmentally benign precursors which can be employed in future applications toward capacitors, oil sorption, spill recovery, and bactericidal coatings.Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. F. Béguin, V. Presser, A. Balducci, E. Frackowiak, Carbons and electrolytes for advanced supercapacitors. Adv. Mater. 26, 2219–2251 (2014). https://doi.org/10.1002/adma.20130413710.1002/adma.201304137 ↗
2. C. Wang, M.J. O’Connell, C.K. Chan, Facile one-pot synthesis of highly porous carbon foams for high-performance supercapacitors using template-free direct pyrolysis. ACS Appl. Mater. Interfaces 7, 8952–8960 (2015). https://doi.org/10.1021/acsami.5b0245310.1021/acsami.5b02453 ↗
3. Y. Wen, K. He, Y. Zhu, F. Han, Y. Xu, I. Matsuda, Y. Ishii, J. Cumings, C. Wang, Expanded graphite as superior anode for sodium-ion batteries. Nat. Commun. 5, 1–10 (2014). https://doi.org/10.1038/ncomms503310.1038/ncomms5033 ↗
4. X. Wang, Y. Zhang, C. Zhi, X. Wang, D. Tang, Y. Xu, Q. Weng, X. Jiang, M. Mitome, D. Golberg, Y. Bando, Three-dimensional strutted graphene grown by substrate-free sugar blowing for high-power-density supercapacitors. Nat. Commun. (2013). https://doi.org/10.1038/ncomms390510.1038/ncomms3905 ↗
5. R.K. Paul, M. Ghazinejad, M. Penchev, J. Lin, M. Ozkan, C.S. Ozkan, Synthesis of a pillared graphene nanostructure: a counterpart of three-dimensional carbon architectures. Small 6, 2309–2313 (2010). https://doi.org/10.1002/smll.20100052510.1002/smll.201000525 ↗
6. M. Inagaki, F. Kang, M. Toyoda, H. Konno, Advanced Materials Science and Engineering of Carbon (Springer, New York, 2013)
7. J. Ji, L.L. Zhang, H. Ji, Y. Li, X. Zhao, X. Bai, X. Fan, F. Zhang, R.S. Ruoff, Nanoporous Ni(OH)2 thin film on 3d ultrathin-graphite foam for asymmetric supercapacitor. ACS Nano 7, 6237–6243 (2013). https://doi.org/10.1021/nn402195510.1021/nn4021955 ↗
8. H.H. Bay, D. Patino, Z. Mutlu, P. Romero, M. Ozkan, C.S. Ozkan, Scalable multifunctional ultra-thin graphite sponge: free-standing, superporous, superhydrophobic, oleophilic architecture with ferromagnetic properties for environmental cleaning. Sci. Rep. 6, 1–9 (2016). https://doi.org/10.1038/srep2185810.1038/srep21858 ↗
9. H. Bi, X. Xie, K. Yin, Y. Zhou, S. Wan, L. He, F. Xu, F. Banhart, L. Sun, R.S. Ruoff, Spongy graphene as a highly efficient and recyclable sorbent for oils and organic solvents. Adv. Funct. Mater. 22, 4421–4425 (2012). https://doi.org/10.1002/adfm.20120088810.1002/adfm.201200888 ↗
10. H. Bi, Z. Yin, X. Cao, X. Xie, C. Tan, X. Huang, B. Chen, F. Chen, Q. Yang, X. Bu, X. Lu, L. Sun, H. Zhang, Carbon fiber aerogel made from raw cotton: a novel, efficient and recyclable sorbent for oils and organic solvents. Adv. Mater. 25, 5916–5921 (2013). https://doi.org/10.1002/adma.20130243510.1002/adma.201302435 ↗
11. M. Toyoda, M. Inagaki, Sorption and recovery of heavy oils by using exfoliated graphite. Spill Sci. Technol. Bull. 8, 467–474 (2003). https://doi.org/10.1016/S1353-2561(03)00131-210.1016/S1353-2561(03)00131-2 ↗
12. M. Toyoda, M. Inagaki, Heavy oil sorption using exfoliated graphite. Carbon N. Y. 38, 199–210 (2000). https://doi.org/10.1016/s0008-6223(99)00174-810.1016/s0008-6223(99)00174-8 ↗
13. C.H. Lee, N. Johnson, J. Drelich, Y.K. Yap, The performance of superhydrophobic and superoleophilic carbon nanotube meshes in water-oil filtration. Carbon N. Y. 49, 669–676 (2011). https://doi.org/10.1016/j.carbon.2010.10.01610.1016/j.carbon.2010.10.016 ↗
14. M. Inagaki, H. Nonno, M. Toyoda, K. Moriya, Sorption and recovery of heavy oils by using exfoliated graphite Part I: maximum sorption capacity. Desalination 128(3), 205–211 (2000)10.1016/S0011-9164(00)00034-5 ↗
15. B. Duan, H. Gao, M. He, L. Zhang, Hydrophobic modification on surface of chitin sponges for highly effective separation of oil. ACS Appl. Mater. Interfaces 6, 19933–19942 (2014). https://doi.org/10.1021/am505414y10.1021/am505414y ↗
16. Q. Zhu, Q. Pan, F. Liu, Facile removal and collection of oils from water surfaces through superhydrophobic and superoleophilic sponges. J. Phys. Chem. C 115, 17464–17470 (2011). https://doi.org/10.1021/jp204302710.1021/jp2043027 ↗
17. N. Brun, C.A. García-González, I. Smirnova, M.M. Titirici, Hydrothermal synthesis of highly porous carbon monoliths from carbohydrates and phloroglucinol. RSC Adv. 3, 17088–17096 (2013). https://doi.org/10.1039/c3ra41419a10.1039/c3ra41419a ↗
18. M. Inagaki, J. Qiu, Q. Guo, Carbon foam: preparation and application. Carbon N. Y. 87, 128–152 (2015). https://doi.org/10.1016/j.carbon.2015.02.02110.1016/j.carbon.2015.02.021 ↗
19. N. Frese, S. Taylor Mitchell, A. Bowers, A. Gölzhäuser, K. Sattler, Diamond-like carbon nanofoam from low-temperature hydrothermal carbonization of a sucrose/naphthalene precursor solution. C 3, 23 (2017). https://doi.org/10.3390/c303002310.3390/c3030023 ↗
20. A. Panáček, L. Kvítek, R. Prucek, M. Kolář, R. Večeřová, N. Pizúrová, V.K. Sharma, T. Nevěčná, R. Zbořil, Silver colloid nanoparticles: synthesis, characterization, and their antibacterial activity. J. Phys. Chem. B 110, 16248–16253 (2006). https://doi.org/10.1021/jp063826h10.1021/jp063826h ↗
21. W.R. Li, X.B. Xie, Q.S. Shi, H.Y. Zeng, Y.S. Ou-Yang, Y. BenChen, Antibacterial activity and mechanism of silver nanoparticles on Escherichia coli. Appl. Microbiol. Biotechnol. 85, 1115–1122 (2010). https://doi.org/10.1007/s00253-009-2159-510.1007/s00253-009-2159-5 ↗
22. K. Dědková, B. Janíková, K. Matějová, K. Čabanová, R. Váňa, A. Kalup, M. Hundáková, J. Kukutschová, ZnO/graphite composites and its antibacterial activity at different conditions. J. Photochem. Photobiol. B 151, 256–263 (2015). https://doi.org/10.1016/j.jphotobiol.2015.08.01710.1016/j.jphotobiol.2015.08.017 ↗
23. J.C. Medina, V.I. Garcia-Perez, R. Zanella, Metallic composites based on Ag, Cu, Au and Ag–Cu nanoparticles with distinctive bactericidal effect on varied species. Mater. Today Commun. 26, 102182 (2021). https://doi.org/10.1016/j.mtcomm.2021.10218210.1016/j.mtcomm.2021.102182 ↗
24. N.L.V. Carreño, M.T. Escote, A. Valentini, L. McCafferty, V. Stolojan, M. Beliatis, C.A. Mills, R. Rhodes, C.T.G. Smith, S.R.P. Silva, Adsorbent 2D and 3D carbon matrices with protected magnetic iron nanoparticles. Nanoscale 7, 17441–17449 (2015). https://doi.org/10.1039/c5nr04499e10.1039/c5nr04499e ↗
25. E. Piperopoulos, L. Calabrese, A. Khaskhoussi, E. Proverbio, C. Milone, Thermo-physical characterization of carbon nanotube composite foam for oil recovery applications. Nanomaterials (2020). https://doi.org/10.3390/nano1001008610.3390/nano10010086 ↗
26. B. Singh, S. Kumar, B. Kishore, T.N. Narayanan, Magnetic scaffolds in oil spill applications. Environ. Sci. Water Res. Technol. 6, 436–463 (2020). https://doi.org/10.1039/c9ew00697d10.1039/c9ew00697d ↗
27. C.L. Mehltretter, C.E. Rist, Sugar oxidation, saccharic and oxalic acids by the nitric acid oxidation of dextrose. J. Agric. Food Chem. 1, 779–783 (1953). https://doi.org/10.1021/jf60012a00510.1021/jf60012a005 ↗
28. R. Neuman, Carbohydrates from organic chemistry in organic chemistry. Chemistry 13(31), 8648–8659 (1999)
29. T.N. Smith, K. Hash, C.L. Davey, H. Mills, H. Williams, D.E. Kiely, Modifications in the nitric acid oxidation of d-glucose. Carbohydr. Res. 350, 6–13 (2012). https://doi.org/10.1016/j.carres.2011.12.02410.1016/j.carres.2011.12.024 ↗
30. H. Xi, Z. Gao, J. Wang, Kinetics of oxidative decarboxylation of 3,4-methylenedioxymandelic acid to piperonal with dilute nitric acid. Ind. Eng. Chem. Res. 48, 10425–10430 (2009). https://doi.org/10.1021/ie900961r10.1021/ie900961r ↗
31. J. Livage, M. Henry, C. Sanchez, Sol-gel chemistry of transition metal oxides. Prog. Solid State Chem. 18, 259–341 (1988). https://doi.org/10.1016/0079-6786(88)90005-210.1016/0079-6786(88)90005-2 ↗
32. C.C. Addison, Dinitrogen tetroxide, nitric acid, and their mixtures as media for inorganic reactions. Chem. Rev. 80, 21–39 (1980). https://doi.org/10.1021/cr60323a00210.1021/cr60323a002 ↗
33. J. Mu, D.D. Perlmutter, Thermal decomposition of metal nitrates and their hydrates. Thermochim. Acta. 56, 253–260 (1982). https://doi.org/10.1016/0040-6031(82)87033-010.1016/0040-6031(82)87033-0 ↗
34. K. Lu, Porous and high surface area silicon oxycarbide-based materials - A review. Mater. Sci. Eng. R Rep. 97, 23–49 (2015). https://doi.org/10.1016/j.mser.2015.09.00110.1016/j.mser.2015.09.001 ↗
35. E. Aram, S. Mehdipour-Ataei, A review on the micro- and nanoporous polymeric foams: preparation and properties. Int. J. Polym. Mater. Polym. Biomater. 65, 358–375 (2016). https://doi.org/10.1080/00914037.2015.112994810.1080/00914037.2015.1129948 ↗
36. S. Panigrahi, S. Kundu, S.K. Ghosh, S. Nath, T. Pal, General method of synthesis for metal nanoparticles. J. Nanoparticle Res. 6, 411–414 (2004). https://doi.org/10.1007/s11051-004-6575-210.1007/s11051-004-6575-2 ↗
37. S.K. Mehta, S. Chaudhary, M. Gradzielski, Time dependence of nucleation and growth of silver nanoparticles generated by sugar reduction in micellar media. J. Colloid Interface Sci. 343, 447–453 (2010). https://doi.org/10.1016/j.jcis.2009.11.05310.1016/j.jcis.2009.11.053 ↗
38. B. Gyurcsik, L. Nagy, Carbohydrates as ligands: Coordination equilibria and structure of the metal complexes. Coord. Chem. Rev. 203, 81–149 (2000). https://doi.org/10.1016/S0010-8545(99)00183-610.1016/S0010-8545(99)00183-6 ↗
39. C.T. Wirth, B.C. Bayer, A.D. Gamalski, S. Esconjauregui, R.S. Weatherup, C. Ducati, C. Baehtz, J. Robertson, S. Hofmann, The phase of iron catalyst nanoparticles during carbon nanotube growth. Chem. Mater. 24, 4633–4640 (2012). https://doi.org/10.1021/cm301402g10.1021/cm301402g ↗
40. P.J. Charley, B. Sarkar, C.F. Stitt, P. Saltman, Chelation of iron by sugars. BBA - Biochim. Biophys. Acta. 69, 313–321 (1963). https://doi.org/10.1016/0006-3002(63)91264-210.1016/0006-3002(63)91264-2 ↗
41. H. Zhu, K. Suenaga, A. Hashimoto, K. Urita, K. Hata, S. Iijima, Atomic-resolution imaging of the nucleation points of single-walled carbon nanotubes. Small 1, 1180–1183 (2005). https://doi.org/10.1002/smll.20050020010.1002/smll.200500200 ↗
42. Y. Homma, Y. Kobayashi, T. Ogino, D. Takagi, R. Ito, Y.J. Jung, P.M. Ajayan, Role of transition metal catalysts in single-walled carbon nanotube growth in chemical vapor deposition. J. Phys. Chem. B 107, 12161–12164 (2003). https://doi.org/10.1021/jp035384510.1021/jp0353845 ↗
43. N. Sano, H. Akazawa, T. Kikuchi, T. Kanki, Separated synthesis of iron-included carbon nanocapsules and nanotubes by pyrolysis of ferrocene in pure hydrogen. Carbon N. Y. 41, 2159–2162 (2003). https://doi.org/10.1016/S0008-6223(03)00215-X10.1016/S0008-6223(03)00215-X ↗
44. C.P. Deck, K. Vecchio, Prediction of carbon nanotube growth success by the analysis of carbon-catalyst binary phase diagrams. Carbon N. Y. 44, 267–275 (2006). https://doi.org/10.1016/j.carbon.2005.07.02310.1016/j.carbon.2005.07.023 ↗
45. K.A. Mkhoyan, A.W. Contryman, J. Silcox, D.A. Stewart, G. Eda, C. Mattevi, S. Miller, M. Chhowalla, Atomic and electronic structure of graphene-oxide. Nano Lett. 9, 1058–1063 (2009). https://doi.org/10.1021/nl803425610.1021/nl8034256 ↗
46. F. Ding, P. Larsson, J.A. Larsson, R. Ahuja, H. Duan, A. Rosen, K. Bolton, The importance of strong carbon-metal adhesion for catalytic nucleation of single-walled carbon nanotubes. Nano Lett. 8, 463–468 (2008). https://doi.org/10.1021/nl072431m10.1021/nl072431m ↗
47. F. Ding, A. Roséna, K. Boltona, Dependence of SWNT growth mechanism on temperature and catalyst particle size: bulk versus surface diffusion. Carbon N. Y. 43, 1–8 (2005)10.1016/j.carbon.2005.03.021 ↗
48. S. Janssens, G. Van den Mooter, Review: physical chemistry of solid dispersions. J. Pharm. Pharmacol. 61, 1571–1586 (2009). https://doi.org/10.1211/jpp/61.12.000110.1211/jpp/61.12.0001 ↗
49. F. Ding, K. Bolton, A. Rosén, Nucleation and growth of single-walled carbon nanotubes: a molecular dynamics study. J. Phys. Chem. B 108, 17369–17377 (2004). https://doi.org/10.1021/jp04664510.1021/jp046645 ↗