Show source-provided references
1. AASHTO. (1993). AASHTO guide for design of pavement structures Washington DC.
2. AASHTO. (2004). “Standard specification for materials for aggregate and soil-aggregate subbase base and surface courses.” AASHTO M147-65 Washington DC.
3. AASHTO. (2007). “Determining the resilient modulus of soils and aggregate materials.” AASHTO T307-99 Washington DC.
4. AASHTO. (2008). “Standard specification for classification of soils and soil-aggregate mixtures for highway construction purposes.” AASHTO M145-91 Washington DC.
7. ASTM. (2008). “Standard test methods for determination of maximum dry unit weight and water content range for effective compaction of granular soils using a vibrating hammer.” ASTM D7382 West Conshohocken PA.
8. ASTM. (2009). “Standard test methods for single batch extraction method for wastes.” ASTM D5233 West Conshohocken PA.
9. ASTM. (2014). “Standard test method for California bearing ratio (CBR) of laboratory-compacted soils.” ASTM D1883 West Conshohocken PA.
11. Bozyurt O. Keene A. Tinjum J. M. and Edil T. B. (2012). “Freeze-thaw effects on stiffness of unbound recycled road base.” Proc. 91st Annual Meeting of the Transportation Research Board Washington DC.
10.1520/STP156820130014 ↗18. Chen J. Bradshaw S. Benson C. H. Tinjum J. M. and Edil T. B. (2012). “pH-dependent leaching of trace elements from recycled concrete aggregate.” Proc. Geocongress 2012 ASCE Reston VA.
10.1061/9780784412121.382 ↗21. Edil T. B. (2012). “Recycled unbound materials.” Rep. No. 2012-35 Minnesota DOT St. Paul MN.
24. EPA. (2009). “Water drinking limits.” 〈http://water.epa.gov/drink/contaminants/〉 (Nov. 20 2015).
25. FHWA (Federal Highway Administration). (2008). “User guideline for byproducts and secondary use materials in pavement construction.” Rep. No. FHWA-RD-97-148 McLean VA.
30. Haider I. (2013). “Geomechanical and hydraulic behavior of Maryland graded aggregate base materials.” M.S. thesis Univ. of Maryland College Park MD.
33. Huang Y. H. · 1993
34. Kazmee H. Tutumluer E. and Mishra D. (2012). “Effects of material blending on strength modulus and deformation characteristics of recycled concrete aggregates.” Proc. 91st Annual Meeting of the Transportation Research Board Washington DC.
40. Leigh N. G. and Patterson L. M. (2004). “Construction and demolition debris recycling for environmental protection and economic development.” Practice Guide #7 EPA Region 4 Southeast Regional Environmental Finance Center Univ. of Louisville Louisville KY.
41. Mamlouk M. S. · 2011
42. Some studies on durability of recycled concrete aggregate concrete
43. MDSHA (Maryland State Highway Administration). (2013). “Maryland roadway design manual.” 〈http://www.roads.maryland.gov/m/index.aspx?PageId=453〉 (Nov. 20 2015).
46. NCHRP (National Cooperative Highway Research Program). (1998). “Harmonized test methods for laboratory determination of resilient modulus for flexible pavement design.” NCHRP 1-28A Washington DC.
51. Sweere G. T. H. (1990). “Unbound granular basis for roads.” Ph.D. thesis Univ. of Delft Delft Netherlands.
53. U.S. EPA. (1991). “Methods for the determination of metals in environmental samples.” Office of Research and Development Cincinnati.
55. Wen H. Martono W. Edil T. B. Clyne R. and Patton R. (2010). “Field evaluation of recycled pavement materials at MnROAD.” Proc. GeoCongress ASCE Reston VA.
10.1061/41104(377)32 ↗56. Witczak M. W. and Uzan J. (1988). “The universal airport pavement design system.” Rep. I of V. Maryland Univ. of Maryland College Park MD.
57. Yuan D. Hoyos L. R. and Puppala A. J. (2011). “Evaluation and mix design of cement-treated base materials with high RAP content.” 90th Annual Meeting of the Transportation Research Board Washington DC.
10.3141/2212-12 ↗