journal article·2017-12

Post-event damage assessment of concrete using the fluorescent microscopy technique

Amirmasoud Malek, Allan Scott, Stefano Pampanin, Gregory MacRae

Publisher page

Abstract

Abstract The fluorescent microscopy technique was used to evaluate post-event damage in the microstructure of concrete cylinders previously subjected to 50%, 70%, and 90% of their ultimate strength (f'c). A 25-mm disk was then sawn from the mid-height of each pre-damaged cylinder and vacuum-impregnated within an epoxy resin containing fluorescent dye. The application of a fluorescent microscopic technique on the polished petrographic specimens obtained from each disk allowed the development of relationships to estimate crack area, crack width, and crack length at each stress level. To correlate damage in the concrete's microstructural system with degradation in mechanical properties, companion concrete cylinders preloaded identically, were reloaded to failure. Strength remained constant compared with intact concrete; the residual strain capacity of damaged concrete showed a decrease of 29% at 0.9f'c. A relationship was established to evaluate the residual strain capacity using a damage index based on the change in the area of microcracks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Geophysical Methods and Applications · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Carpinteri · 2004 · 31
2. Crack classification in concrete based on acoustic emission10.1016/j.conbuildmat.2010.05.004 ↗
3. Acoustic emission techniques standardized for concrete structures
4. Microstructure and fracture in three dimensions10.1016/S0013-7944(02)00157-1 ↗
5. The X-ray examination of concrete
6. X-rays for study of internal structure and microcracking of concrete
7. Ultrasonic tomography for evaluation of concrete pavements. Transportation research record10.3141/2232-09 ↗
8. Looking into concrete10.1680/macr.2001.53.2.135 ↗
9. A nondestructive procedure to observe the microcracks of concrete by scanning electron microscopy10.1016/0008-8846(85)90097-3 ↗
10. C1723-10, standard guide for examination of hardened concrete using scanning electron microscopy
11. Microcracking of plain concrete and the shape of the stress-strain curve
12. Murphy · 2012
13. Fluorescent thin sections to observe the fracture zone in mortar10.1016/0008-8846(84)90051-6 ↗
14. Fluorescent liquid replacement technique. A means of crack detection and water: binder ratio determination in high strength concretes10.1016/0008-8846(95)00101-H ↗
15. Reproducibility of w/c ratio determination from fluorescent impregnated thin sections10.1016/j.cemconres.2006.05.003 ↗
16. The quantitative evaluation of the water/cement ratio using fluorescence microscopy10.1680/macr.1990.42.150.45 ↗
17. Identification and quantification of cracks in concrete by optical fluorescent microscopy10.1016/j.cemconres.2006.05.011 ↗
18. Crack system evaluation in concrete elements at mesoscale
19. Quantitative damage evaluation of AAR-affected concrete by DIP technique10.1680/macr.12.00092 ↗
20. An impregnation technique for crack identification following uniaxial tension tests10.4028/www.scientific.net/AMR.275.51 ↗
21. Richart · 1928 · vol. 26
22. Critical stress, volume change, and microcracking of concrete
23. C856-14, standard practice for petrographic examination of hardened concrete
24. A description of micro-and macroscale damage of concrete structures10.1016/0013-7944(86)90036-6 ↗
25. The influence of mortar-aggregate bond strength on the behaviour of concrete in uniaxial compression10.1016/0008-8846(77)90117-X ↗
26. Dependence of cement-aggregate bond-strength on size of aggregate10.1038/187230a0 ↗
27. Failure mechanism of concrete: combined effects of coarse aggregates and strength level10.1016/S1065-7355(97)00014-X ↗
28. Influence of aggregate size and volume fraction on shrinkage induced micro-cracking of concrete and mortar10.1016/j.cemconres.2009.09.012 ↗
29. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
30. Development of a non-destructive test to quantify damage in deteriorated concrete10.1680/macr.1993.45.165.247 ↗