journal article·2020-09

Shear rheo-viscoelasticity approach to the plastic cracking of early-age concrete

John Temitope Kolawole, Riaan Combrinck, William Peter Boshoff

Publisher page

Abstract

Abstract The self-settlement phase of plastic cracking is majorly shear dominated and can be characterised by shear rheometry. This phase is susceptible to microstructural damage/cracking that can be rapidly propagated by the later occurring plastic shrinkage. This study experimentally determined the material properties and behaviour of rheologically modified concrete mixes using shear rheometry and measured their plastic cracking. Von-Mises and Hencky, and Bresler-Pister theories were then used as failure criteria with hypothetically fully restrained plastic strain/stress analyses to model the occurrence of plastic cracking. The incorporated rheology modifiers influenced the shear properties, viscoelastic abilities and plastic cracking of the concrete. The predictions of the model revealed that the plastic settlement is indeed mainly shear-related, the viscoelastic behaviour influences plastic cracking, and microcracking can occur before the initial setting time. It was also concluded that plastic concrete damage tends to be strain-oriented with pressure-insensitive form of ductile failure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. Detecting the fluid-to-solid transition in cement pastes: assessment techniques
2. Interaction between settlement and shrinkage cracking in plastic concrete10.1016/j.conbuildmat.2018.07.028 ↗
3. Susceptibility of Portland cement and blended cement concretes to plastic shrinkage cracking10.1016/j.cemconcomp.2017.10.002 ↗
4. Impact of admixtures on the plastic shrinkage cracking of self-compacting concrete10.1016/j.cemconcomp.2013.11.002 ↗
5. Influence of shrinkage-reducing admixtures on development of plastic shrinkage cracks
6. Influence of rheology on the cracking of plastic concrete
7. Rheometric and ultrasonic investigations of viscoelastic properties of fresh Portland cement pastes10.1016/j.cemconres.2005.08.007 ↗
8. Mezger · 2014
9. Mernard · 1999
10. Viscoelastic properties of fresh cement paste to study the flow behavior10.1007/s40069-016-0158-3 ↗
11. A review of nonlinear oscillatory shear tests: analysis and application of large amplitude oscillatory shear (LAOS)10.1016/j.progpolymsci.2011.02.002 ↗
12. Roussel · 2012
13. Rheology of fresh cement and concrete - a review
14. Tensile properties of plastic concrete and the influence of temperature and cyclic loading10.1016/j.cemconcomp.2019.01.002 ↗
15. The tensile material properties of plastic concrete and the influence on plastic cracking
16. Tensile properties of concrete at very early ages10.1016/j.conbuildmat.2016.12.169 ↗
17. On the mechanism of plastic shrinkage cracking in fresh cementitious materials10.1016/j.cemconres.2018.10.015 ↗
18. Tensile behaviour of early age concrete: new methods of investigation10.1016/j.cemconcomp.2014.07.024 ↗
19. Tensile properties of early-age concrete
20. Measuring the thixotropy of conventional concrete: the influence of viscosity modifying agent, superplasticiser and water10.1016/j.conbuildmat.2019.07.240 ↗
21. State-of-the-art review on plastic cracking of concrete10.1016/j.conbuildmat.2019.07.197 ↗
22. Early-age cracking in concrete: causes, consequences, remedial measures, and recommendations10.3390/app8101730 ↗
23. Anton-Paar · 2016
24. Anton-Paar · 2009
25. Anton-Paar · 2012
26. Koehler · 2004
27. Germann Instruments A/S · 2015
28. Rheo-viscoelastic behaviour of cement-based materials: cement paste, mortar and concrete10.1016/j.conbuildmat.2020.118667 ↗
29. Viscoelasticity characteristics of mortars in static and dynamic rheological test
30. Use of creep recovery protocol to measure static yield stress and structural rebuilding of fresh cement pastes10.1016/j.cemconres.2016.09.005 ↗
31. Use of oscillatory shear to study flow behavior of fresh cement paste10.1016/0008-8846(93)90092-N ↗
32. Cracking of asphalt at low temperature as related to bitumen rheology10.1023/A:1004383506240 ↗
33. Dynamic mode rheology of cement and tricalcium silicate pastes from mixing to setting10.1016/S0008-8846(00)00464-6 ↗
34. Oscillating rheometer measurements on oilfield cement slurries10.1016/0008-8846(91)90037-I ↗
35. Dynamic rheological behavior of low water-to-binder ratio mortars under large amplitude oscillatory shear (LAOS)10.1007/s11595-018-1868-y ↗
36. Estimating time and temperature dependent yield stress of cement paste using oscillatory rheology and genetic algorithms10.1016/j.cemconres.2009.07.011 ↗
37. Small amplitude oscillatory shear technique to evaluate structural build-up of cement paste10.1617/s11527-016-0978-2 ↗
38. Investigation of rheological properties of blended cement pastes using rotational viscometer and dynamic shear rheometer10.1155/2018/6303681 ↗
39. The origins of thixotropy of fresh cement pastes10.1016/j.cemconres.2011.09.004 ↗
40. Kinloch · 1995
41. Effect of viscosity modifying agent on plastic shrinkage cracking of cementitious composites10.1617/s11527-009-9518-7 ↗
42. Influence of concrete depth and surface finishing on the cracking of plastic concrete10.1016/j.conbuildmat.2018.04.225 ↗
43. M. Aldalinsi, C. Ferregut, C. Carrasco, V. Tandon, M. Alderette, A method to reduce plastic shrinkage cracking of concrete using the re-vibration technique, in: Struct. Congr. 2014, American Society of Civil Engineers, Reston, VA, 2014: pp. 1942–1954. doi:https://doi.org/10.1061/9780784413357.171.10.1061/9780784413357.171 ↗
44. ASTM C1579
45. Degree of restraint concept in analysis of early-age stresses in concrete walls10.1016/j.engstruct.2015.08.025 ↗
46. Influence of steel plates and studs on shrinkage behavior and cracking potential of high-performance concrete
47. Nilsson · 2003
48. fib Model Code · 2010
49. Hibbeler · 2014
50. Building durable structures in the 21st century
51. Evolution of strength and failure of SCC during early hydration10.1016/j.cemconres.2016.09.004 ↗
52. Plasticity models for concrete material based on different criteria including Bresler–Pister10.1016/j.matdes.2009.06.018 ↗
53. Jones · 2009
54. Rheological behaviors and model of fresh concrete in vibrated state10.1016/j.cemconres.2019.03.020 ↗
55. Rheology and vibration of fresh concrete: predicting the radius of action of poker vibrators from wave propagation10.1016/j.cemconres.2011.04.011 ↗
56. Influence of water/cement ratio, admixtures and filler on sedimentation and bleeding of cement paste10.1016/j.cemconres.2013.09.003 ↗
57. Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures10.1016/j.cemconres.2018.02.022 ↗
58. Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times10.1016/j.conbuildmat.2013.10.011 ↗
59. Steady state flow of cement suspensions: a micromechanical state of the art10.1016/j.cemconres.2009.08.026 ↗
60. Recent advances on yield stress and elasticity of fresh cement-based materials10.1016/j.cemconres.2019.105798 ↗
61. Finite element simulation of cold isostatic pressing and sintering of SiC components10.1016/S0272-8842(03)00086-5 ↗
62. A general failure criterion for plain concrete10.1016/0020-7683(87)90022-9 ↗
63. Identification of material parameters for Drucker–Prager plasticity model for FRP confined circular concrete columns10.1016/j.ijsolstr.2011.10.002 ↗
64. A closed-form analytical solution for circular opening in rocks using Drucker–Prager criterion10.1007/s40098-019-00358-6 ↗
65. Drucker–Prager criterion10.1007/s00603-012-0278-2 ↗
66. The yield normal stress10.1122/1.5063796 ↗
67. Normal stress differences and yield stresses in attractive particle networks10.1155/2016/1716598 ↗
68. Measurement of yield stress of cement pastes using the direct shear test10.1016/j.jnnfm.2014.10.009 ↗
69. Cohesion aspects in rheological behaviour of fresh cement mortars10.1007/BF02473377 ↗
70. Mechanical behaviour of fresh concrete10.1016/0008-8846(81)90105-8 ↗
71. Chryso · 2012
72. Chryso · 2014
73. Modelling the severity of plastic shrinkage cracking in concrete10.1016/j.cemconres.2013.02.003 ↗
74. Tensile creep and early-age concrete cracking due to restrained shrinkage10.1016/j.conbuildmat.2017.05.081 ↗
75. Prediction of early-age creep and cracking age of concrete: a proposed modification for AS3600 provisions10.1080/13287982.2016.1233619 ↗
76. Influence of relaxation and cyclic loading on the tensile material properties of plastic concrete
77. Combined effect of nano-silica, super absorbent polymers, and synthetic fibres on plastic shrinkage cracking in concrete10.1016/j.conbuildmat.2018.10.102 ↗
78. Effect of various liquid admixtures on cracking of plastic concrete10.1016/j.conbuildmat.2018.12.060 ↗
79. CCIP-048 · 2010
80. Plastic shrinkage cracking and evaporation formulae
81. Sayahi · 2016
82. Capillary pressure in fresh cement-based materials and identification of the air entry value10.1016/j.cemconcomp.2008.03.002 ↗
83. Influence of mix and environment on plastic shrinkage cracking10.1680/macr.2003.55.4.385 ↗
84. Plastic shrinkage cracking of normal and high-strength concrete: a comparative study
85. Capillary pressure monitoring in plastic concrete for controlling early-age shrinkage cracking10.3141/2441-01 ↗
86. Combrinck · 2009