Prediction of moisture transfer in cement-based materials: Use of a porous network model to access transfer parameters
Source abstract
Abstract
Abstract Knowing the water transport phenomena is fundamental for understanding the durability of cement-based materials. The moisture content within cementitious materials is of primary importance because it has a direct influence on mechanical (shrinkage, creep) and chemical (penetration of aggressive agents) degradation. Many models based on the determination of the transfer properties of the material under study already exist but require fitting of the parameters to find the experimental kinetics. Transfer parameters are generally estimated from the empirical approaches developed for soils by Van Genuchten and the water vapour diffusion reduction factor is often calculated via Millington's semi-empirical model. In this paper, we make a proposal to improve the prediction of moisture transfer, through mechanisms such as drying, capillary imbibition and water vapour permeability in cement-based materials, by using a porous network model to access the transfer parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Modeling of pore water content in concrete under generic drying wetting conditions10.2208/jscej.1997.564_199 ↗
2. Nonlinear water diffusion in nonsaturated concrete10.1007/BF02479073 ↗
3. Moisture diffusion in cementitious materials adsorption isotherms10.1016/1065-7355(94)90033-7 ↗
4. Predicting moisture movement during the drying of concrete floors using finite elements10.1016/j.conbuildmat.2005.02.014 ↗
5. Moisture behaviour of a massive concrete slab with a low temperature floor heating system during the initial drying period10.1016/j.conbuildmat.2004.07.014 ↗
6. Role of air pressure in drying of weakly permeable materials
7. Modelisation des transferts hydriques isothermes en milieu poreux. Application au sechage des materiaux a base de ciment
8. Modélisation du séchage des bétons: analyse des différents modes de transfert hydrique
9. A new model for predicting the hydraulic conductivity of unsaturated porous media10.1029/WR012i003p00513 ↗
10. A closed-form equation for predicting the hydraulic conductivity of unsaturated soils 110.2136/sssaj1980.03615995004400050002x ↗
11. Modelling of permeability in cement-based materials: part 1-Uncracked medium10.1016/S0008-8846(97)00066-5 ↗
12. A new model to calculate water permeability of cement-based materials from MIP results10.1680/adcr.2002.14.2.43 ↗
13. New network permeability model of porous media10.1002/aic.690210211 ↗
14. Modelling of water permeability in cementitious materials10.1617/s11527-006-9138-4 ↗
15. Prediction of the relative permeability to gas flow of cement-based materials10.1016/S0008-8846(03)00071-1 ↗
16. Tri-dimensional modelling of cementitious materials permeability from polymodal pore size distribution obtained by mercury intrusion porosimetry tests10.1680/adcr.2005.17.1.39 ↗
17. Park · 1968
18. Temperature and concentration dependence of diffusion coefficient in dilute solutions10.1016/0032-3861(81)90129-4 ↗
19. Gas diffusion in porous media10.1126/science.130.3367.100.b ↗
20. Analysis of chloride diffusion into partially saturated concrete
21. Modelling moisture distribution and isothermal transfer in a heterogeneous porous material10.1016/0301-9322(95)00003-G ↗
22. Enhanced modeling of moisture equilibrium and transport in cementitious materials under arbitrary temperature and relative humidity history10.1016/j.cemconres.2006.11.015 ↗
23. Modelling of water vapour sorption hysteresis of cement-based materials based on pore size distribution10.1016/j.cemconres.2018.09.015 ↗
24. Prediction of water vapour sorption isotherms and microstructure of hardened Portland cement pastes10.1016/j.cemconres.2015.11.009 ↗
25. Physical structure of hardened cement paste. A classical approach10.1007/BF02472146 ↗
26. Toward a better comprehension and modeling of hysteresis cycles in the water sorption–desorption process for cement based materials10.1016/j.cemconres.2011.03.012 ↗
27. Prediction of relative permeabilities and water vapor diffusion reduction factor for cement-based materials10.1016/j.cemconres.2013.02.008 ↗
28. Water sorptivity of mortars and concretes: a review10.1680/macr.1989.41.147.51 ↗
29. Modelling the capillary imbibition kinetics in sedimentary rocks: role of petrographical features10.1007/BF00613588 ↗
30. Properties of concrete in the cover zone: water penetration, sorptivity and ionic ingress10.1680/macr.1996.48.176.149 ↗
31. Effect of moisture, chloride and sulphate contamination on the electrical resistivity of Portland cement concrete10.1016/0950-0618(95)00078-X ↗
32. Effect of moisture content on concrete resistivity measurement10.1080/02533839.2002.9670686 ↗
33. Development of a multi-ring resistivity cell and multi-electrode resistivity probe for investigation of cover concrete condition10.1016/j.ndteint.2012.11.007 ↗
34. Bonnet · 1997
35. Francy · 1998
36. Characterization and identification of equilibrium and transfer moisture properties for ordinary and high-performance cementitious materials10.1016/S0008-8846(99)00102-7 ↗
37. Méthodes de détermination de la diffusivité hydrique de pâtes de ciments durcies10.1007/BF02480421 ↗
38. Daian · 1986
39. An approach to determine diffusivity in hardening concrete based on measured humidity profiles10.1016/1065-7355(95)90014-4 ↗
40. Constitutive modeling of unsaturated drying deformable materials
41. Coussy · 1995
42. On the value of the diffusion coefficient of water vapour in air
43. Prediction of the hydraulic diffusivity from pore size distribution of concrete10.1016/j.cemconres.2004.10.043 ↗
44. Modeling of the link between microstructure and effective diffusivity of cement pastes using a simplified composite model10.1016/j.cemconres.2006.06.004 ↗
45. Adenot · 1992
46. Méthodes recommandées pour la mesure des grandeurs associées à la durabilité
47. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
48. Experimental study of the water desorption and drying shrinkage of cement-based materials with thin slices
49. Baroghel-Bouny · 1994
50. Ranaivomanana · 2010
51. Water vapour sorption experiments on hardened cementitious materials: part I: essential tool for analysis of hygral behaviour and its relation to pore structure10.1016/j.cemconres.2006.11.019 ↗
52. Water vapour sorption experiments on hardened cementitious materials. Part II: essential tool for assessment of transport properties and for durability prediction10.1016/j.cemconres.2006.11.017 ↗
53. Mesure de la perméabilité aux gaz en fonction du taux de saturation des bétons10.1080/12795119.2001.9692306 ↗
54. Hang · 2015
55. Measurement of concrete resistivity for assessment of corrosion
56. Non-destructive evaluation of concrete moisture by GPR: experimental study and direct modeling10.1007/BF02481655 ↗
57. Permeability and damage of partially saturated concrete exposed to elevated temperature10.1016/j.cemconcomp.2020.103563 ↗
58. Analysis of moisture transport in cementitious materials and modelling of drying-wetting cycles
59. N. E. ISO 12571 · 2000
60. E. ISO 12572 · 2001
61. An optimised preconditioning procedure for gas permeability measurement10.1007/BF02482086 ↗