Thermal Resistance and Microstructural Response of Metakaolin- and Fly Ash–Based Geopolymers Modified with Nanosilica
Source abstract
Abstract
In this work, the influence of nanosilica (NS) addition on the thermal and mechanical stability of metakaolin (MK)- and fly ash (FA)–based geopolymers at high temperatures (300°C, 600°C, and 900°C) is studied. A total of 16 mixes were produced by varying the binder, aggregate, and NS content. The thermal behavior was investigated by strength retention, water loss, and microstructure studies using scanning electron microscopy, energy-dispersive spectroscopy, and X-ray diffraction. Results indicate better initial strength development but higher strength decay as stress in the microstructure and gel structure breaks down and crack formation occurs, especially for MK-based systems, as the silica content increases. At 900°C, the strength drop of MK samples was more closely related to moisture loss than to FA, indicating a higher sensitivity to moisture. Additionally, NS significantly increased water loss in FA systems, while its effect was more moderate in MK matrices. Statistical analyses (univariate regression and two-way ANOVA) identified binder type as the most influential factor, with aggregate type playing a secondary role. The best performance was observed in MK–SK (sand kaolin) combinations, where NS improved matrix densification and reduced glassy phase transitions, enhancing thermal crack resistance. Overall, the study highlights the importance of optimizing NS dosage in relation to binder type, aggregate selection, and the Si/Al ratio. Proper integration of these factors is essential to maximize thermal stability and microstructural integrity in geopolymer composites.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Clay minerals and soil interactions · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
İstanbul Aydın Univ.
References (76)
Show source-provided references
1. 10.3390/ma1219307810.3390/ma12193078 ↗
2. 10.3390/buildings1312303310.3390/buildings13123033 ↗
3. 10.1186/s40069-024-00672-110.1186/s40069-024-00672-1 ↗
4. 10.1016/j.conbuildmat.2014.12.07510.1016/j.conbuildmat.2014.12.075 ↗
5. 10.1016/j.conbuildmat.2022.12672210.1016/j.conbuildmat.2022.126722 ↗
6. Ashwini, R. M., M. Potharaju, V. Srinivas, S. K. Durga, G. V. Rathnamala, and A. Paudel. 2023. “Compressive and flexural strength of concrete with different nanomaterials: A critical review.” J. Nanomater. 2023 (1): 1004597. https://doi.org/10.1155/2023/1004597.
7. ASTM. 2016. Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens). ASTM C109/C109M-16a. West Conshohocken PA: ASTM.
8. ASTM. 2021. Standard test method for flexural strength of hydraulic-cement mortars. ASTM C348-21. West Conshohocken PA: ASTM.
9. ASTM. 2022. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM C618-22. West Conshohocken PA: ASTM.
10. 10.1016/j.conbuildmat.2018.05.26610.1016/j.conbuildmat.2018.05.266 ↗
11. 10.1016/j.jnucmat.2015.04.03610.1016/j.jnucmat.2015.04.036 ↗
12. 10.3390/ma1712297510.3390/ma17122975 ↗
13. 10.1007/s12046-022-02004-z10.1007/s12046-022-02004-z ↗
14. CEN (European Committee for Standardization). 2013. Methods of testing cement—Part 2: Chemical analysis of cement. EN 196-2:2013. Brussels Belgium: CEN.
15. 10.1002/ep.1292110.1002/ep.12921 ↗
16. Chesner W. H. R. J. Collins M. H. MacKay and J. Emery. 2002. User guidelines for waste and by-product materials in pavement construction. Rep. No. 480017. Madison WI: Recycled Materials Resource Center Univ. of Wisconsin–Madison.
17. Cong, P., and Y. Cheng. 2021. “Advances in geopolymer materials: A comprehensive review.” J. Traffic Transp. Eng. 8 (3): 283–314. https://doi.org/10.1016/j.jtte.2021.03.004.
18. 10.1016/j.cemconcomp.2016.06.01710.1016/j.cemconcomp.2016.06.017 ↗
19. 10.1016/j.jobe.2019.10106310.1016/j.jobe.2019.101063 ↗
20. 10.1016/j.conbuildmat.2014.10.01410.1016/j.conbuildmat.2014.10.014 ↗
21. 10.1016/j.conbuildmat.2020.12027610.1016/j.conbuildmat.2020.120276 ↗
22. 10.1016/j.conbuildmat.2021.12476210.1016/j.conbuildmat.2021.124762 ↗
23. Fenelonov, G., T. Soularis, F. Zenasni, and L. Cleret de Langavant. 2010. “The changing face of Parkinson’s disease-associated psychosis: A cross-sectional study based on the new NINDS-NIMH criteria.” Mov. Disord. 25 (6): 755–759. https://doi.org/10.1002/mds.22839.
24. 10.1016/j.jclepro.2020.12453810.1016/j.jclepro.2020.124538 ↗
25. Gebremariam, E. A., M. D. Yehualaw, and B. Zerihun. 2024. “Nano-metakaolin-enhanced fly ash and cement-based geopolymer mortar.” J. Mater. Process Technol. 1 (1): 5. https://doi.org/10.69660/jmpt.v1i1.62.
26. 10.1007/s41779-024-01011-z10.1007/s41779-024-01011-z ↗
27. Guleria, A. N., and S. Salhotra. 2016. “Effects of silica fume (micro silica or nano silica) on mechanical properties of concrete: A review.” Int. J. Civ. Eng. Technol. 7 (4): 345–357.
28. 10.5408/1089-9995-47.4.34110.5408/1089-9995-47.4.341 ↗
29. 10.1088/1757-899X/888/1/01205310.1088/1757-899X/888/1/012053 ↗
30. 10.1016/j.conbuildmat.2023.13092010.1016/j.conbuildmat.2023.130920 ↗
31. 10.1016/j.jhazmat.2019.12137710.1016/j.jhazmat.2019.121377 ↗
32. 10.1155/2020/753270310.1155/2020/7532703 ↗
33. 10.1016/j.jobe.2021.10301110.1016/j.jobe.2021.103011 ↗
34. 10.1016/j.jobe.2019.01.03210.1016/j.jobe.2019.01.032 ↗
35. 10.1007/s41204-021-00124-110.1007/s41204-021-00124-1 ↗
36. Karapınar, I. S., and H. Biricik. 2021. “A comparative study on the sodium sulfate resistance of concrete with the supplementary cementitious materials.” Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 10 (1): 241–246.
37. 10.1016/j.conbuildmat.2016.03.04110.1016/j.conbuildmat.2016.03.041 ↗
38. 10.1016/j.conbuildmat.2022.12887910.1016/j.conbuildmat.2022.128879 ↗
39. 10.1111/jace.1982810.1111/jace.19828 ↗
40. 10.1016/j.resconrec.2007.06.00710.1016/j.resconrec.2007.06.007 ↗
41. 10.3390/magnetochemistry701000910.3390/magnetochemistry7010009 ↗
42. 10.3390/jcs608021910.3390/jcs6080219 ↗
43. Martin, K. R. 2007. “The chemistry of silica and its potential health benefits.” J. Nutr. Health Aging 11 (2): 94. https://doi.org/10.1007/BF02982431.
44. 10.1016/j.conbuildmat.2017.12.10010.1016/j.conbuildmat.2017.12.100 ↗
45. 10.1016/j.hbrcj.2014.11.00610.1016/j.hbrcj.2014.11.006 ↗
46. 10.1016/j.jobe.2023.10649410.1016/j.jobe.2023.106494 ↗
47. 10.1007/s40940-021-00155-910.1007/s40940-021-00155-9 ↗
48. 10.1111/ijac.1496610.1111/ijac.14966 ↗
49. 10.3390/su15211541310.3390/su152115413 ↗
50. Rambabu, D., S. K. Sharma, and M. A. Akbar. 2024. “Fatigue analysis of ambient-cured geopolymer concrete for high-traffic pavements.” Environ. Sci. Pollut. Res. 1–24. https://doi.org/10.1007/s11356-024-34402-7.
51. 10.1111/jace.1337010.1111/jace.13370 ↗
52. 10.1007/s44290-024-00028-410.1007/s44290-024-00028-4 ↗
53. 10.3390/ma907053510.3390/ma9070535 ↗
54. 10.1016/j.apt.2015.05.00810.1016/j.apt.2015.05.008 ↗
55. 10.1617/s11527-025-02636-710.1617/s11527-025-02636-7 ↗
56. 10.1080/19648189.2021.196089910.1080/19648189.2021.1960899 ↗
57. Shahedan, N. F., T. Hadibarata, M. M. A. B. Abdullah, M. N. H. Jusoh, S. Z. Abd Rahim, I. Isia, A. A. Bras, A. Bouaissi, and F. H. Juwono. 2024. “Potential of fly ash geopolymer concrete as repairing and retrofitting solutions for marine infrastructure: A review.” Case Stud. Constr. Mater. 20 (Jul): e03214. https://doi.org/10.1016/j.cscm.2024.e03214.
58. 10.1016/j.conbuildmat.2015.03.03610.1016/j.conbuildmat.2015.03.036 ↗
59. 10.1016/j.conbuildmat.2020.12073810.1016/j.conbuildmat.2020.120738 ↗
60. 10.1016/j.conbuildmat.2020.12149010.1016/j.conbuildmat.2020.121490 ↗
61. Tanimola, J. O., and S. Efe. 2024. “Recent advances in nano-modified concrete: Enhancing durability, strength, and sustainability through nano silica (NS) and nano titanium (NT) incorporation.” Appl. Eng. Sci. 19 (Sep): 100189. https://doi.org/10.1016/j.apples.2024.100189.
62. Tokdemir, M., K. Ramyar, and A. Gultekin. 2024. “High-temperature resistance of industrial waste-based lightweight geopolymer mortars produced using microwave technology.” Arabian J. Sci. Eng. 50 (Nov): 16465–16484. https://doi.org/10.1007/s13369-024-09756-2.10.1007/s13369-024-09756-2 ↗
63. 10.1016/j.conbuildmat.2017.03.19110.1016/j.conbuildmat.2017.03.191 ↗
64. 10.1051/e3sconf/20234450100510.1051/e3sconf/202344501005 ↗
65. Wollast, R., and F. T. Mackenzie. 1983. “The global cycle of silica.” In Silicon geochemistry and biogeochemistry, 39–76. New York: Academic Press.
66. 10.3390/polym1405086810.3390/polym14050868 ↗
67. 10.1016/j.cemconcomp.2018.09.01210.1016/j.cemconcomp.2018.09.012 ↗
68. 10.1016/j.jece.2022.10855010.1016/j.jece.2022.108550 ↗
69. 10.1016/j.jhazmat.2020.12480510.1016/j.jhazmat.2020.124805 ↗
70. 10.1016/j.conbuildmat.2014.04.06310.1016/j.conbuildmat.2014.04.063 ↗
71. 10.1016/j.conbuildmat.2015.01.04510.1016/j.conbuildmat.2015.01.045 ↗
72. 10.1016/j.ceramint.2024.09.20210.1016/j.ceramint.2024.09.202 ↗
73. 10.1016/j.clay.2015.04.02310.1016/j.clay.2015.04.023 ↗
74. 10.1016/j.jclepro.2021.12708510.1016/j.jclepro.2021.127085 ↗
75. 10.1016/j.cemconcomp.2022.10488510.1016/j.cemconcomp.2022.104885 ↗
76. 10.4236/ojce.2020.10201310.4236/ojce.2020.102013 ↗