Influence of Molybdenum Tailings Powder on the Hydration Characteristics of Cement Paste
Source abstract
Abstract
Molybdenum tailings are accumulated in large quantities, occupying the land and polluting the environment. Therefore, the resource utilization of molybdenum tailings is imperative. In this paper, the influence of molybdenum tailings powder (MTs) as admixture on hydration characteristics, including hydration heat, hydration products, phase composition, and mechanical properties evolution of cement paste were investigated. Results showed that the early hydration of cement paste can be promoted when the content of MTs is not more than 15%. The compressive strength of cement paste with 15% MTs at 3, 28, and 120 days was 89.37%, 96.14%, and 91.68% of that of the portland cement (PC) group, respectively. When the content of MTs does not exceed 15%, the second exothermic peak of hydration heat of cement paste appears ahead of time and the peak value increases. With the increase of MTs content, the cumulative heat release of 72 h gradually decreased. The addition of MTs does not produce new hydration products, but introduces the mineral phase of MTs itself, and leads to the early transformation of ettringite (AFt) into monosulfoaluminate (AFm) in paste. There is still a close linear relationship between the compressive strength and cumulative heat release and chemically bound water content after addition of MTs into cement paste. It was also discovered that the pozzolanic activity of MTs in cement paste mainly occurred from 3 to 28 days. After 28 days, the particle-filling effect of MTs was dominant mainly. The research results are expected to provide basic research for the resource utilization of MTs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Master’s Student, School of Civil Engineering, Central South Univ., Changsha, Hunan 410075, China.
Professor, School of Civil Engineering, Central South Univ., Changsha, Hunan 410075, China (corresponding author). ORCID: .
Professor, School of Civil Engineering, Central South Univ., Changsha, Hunan 410075, China.
Senior Economist, Yichun Luming Mining Co., Ltd., No. 164, Shuguang Committee, Meixi Town, Yimei District, Yichun, Heilongjiang 152500, China.
Senior Engineer, Yichun Luming Mining Co., Ltd., No. 164, Shuguang Committee, Meixi Town, Yimei District, Yichun, Heilongjiang 152500, China.
References (30)
Show source-provided references
1. 10.4028/www.scientific.net/AMM.725-726.48710.4028/www.scientific.net/AMM.725-726.487 ↗
2. 10.1111/jace.1317710.1111/jace.13177 ↗
3. Cheng, G. L., X. G. Li, P. Q. Wang, and R. G. Ma. 2022. “Influence of fineness change of limestone powder-fly ash on hydration kinetics of cement-based cementitious material system.” Bull. Chin. Ceram. Soc. 41 (7): 2337–2343. https://doi.org/10.16552/j.cnki.issn1001-1625.2022.07.004.
4. 10.3390/ma1524884610.3390/ma15248846 ↗
5. 10.1016/j.jobe.2023.10630610.1016/j.jobe.2023.106306 ↗
6. 10.1016/j.powtec.2017.04.02210.1016/j.powtec.2017.04.022 ↗
7. Han F. H. 2015. “Study on hydration characteristics and kinetics of composite binder.” Ph.D. thesis School of Chemistry and Environmental Engineering China Univ. of Mining and Technology.
8. Han, F. H., D. M. Wang, and P. Y. Yan. 2014. “Hydration kinetics of composite binder containing different content of slag or fly ash.” J. Chin. Ceram. Soc. 42 (5): 613–620. https://doi.org/10.7521/j.issn.0454-5648.2014.05.10.
9. Li, F., X. W. Cui, X. Liu, F. R. Zhang, M. B. Liu, C. S. Zhou, and X. H. Fan. 2020a. “Physical property test and thermal activation of molybdenum tailings.” Min. Metall. Eng. 40 (5): 83–87. https://doi.org/10.3969/j.issn.0253-6099.2020.05.021.
10. Li, F., J. Sun, Y. Q. Di, F. R. Zhang, X. W. Cui, X. Liu, and M. B. Liu. 2022a. “Research on alkali fused molybdenum tailings as the supplementary cementitious material.” New Build. Mater. 49 (1): 24–27. https://doi.org/10.3969/j.issn.1001-702X.2022.01.006.
11. 10.1016/j.clay.2022.10667410.1016/j.clay.2022.106674 ↗
12. 10.1016/j.conbuildmat.2020.12043610.1016/j.conbuildmat.2020.120436 ↗
13. 10.3390/ma1112249910.3390/ma11122499 ↗
14. 10.1016/j.jobe.2022.10537710.1016/j.jobe.2022.105377 ↗
15. 10.1016/j.conbuildmat.2021.12239010.1016/j.conbuildmat.2021.122390 ↗
16. 10.1016/j.jclepro.2022.13364910.1016/j.jclepro.2022.133649 ↗
17. Quan, Z. Z., X. L. Feng, and Y. Y. Chen. 2022b. “Study on the preparation of reactive powder concrete with molybdenum tailings.” New Build. Mater. 49 (3): 46–49. https://doi.org/10.3969/j.issn.1001-702X.2022.03.011.
18. 10.1016/j.conbuildmat.2022.12919310.1016/j.conbuildmat.2022.129193 ↗
19. Shao, J. H., J. M. Gao, and Y. S. Zhao. 2019. “Characteristics of recycled clay brick powder-cement cementitious system.” J. Southeast Univ. 49 (2): 375–379. https://doi.org/10.3969/j.issn.1001-0505.2019.02.025.
20. Wang C. J. 2021. “Influence of anions on hydration and properties of ordinary portland cement.” Master’s thesis Dept. of Materials Science and Engineering Yan Tai Univ.
21. Wang, C. L., P. F. Ye, K. F. Zhang, G. S. Han, Z. K. Huo, G. F. Zhao, and Z. Z. Ren. 2020. “Study on preparation and hydration mechanism of composite cementitious materials using molybdenum tailings.” Metal Mine 9: 41–47. https://doi.org/10.19614/j.cnki.jsks.202009005.
22. Wang, P. M., S. X. Feng, and X. P. Liu. 2005. “Research approaches of cement hydration degree and their development.” J. Build. Mater. 8 (6): 646–652. https://doi.org/10.3969/j.issn.1007-9629.2005.06.011.
23. Wu, Z. H., and Y. Wei. 2020. “Microstructure and hydration degree of cement paste based on CT.” Acta Mater. Compos. Sin. 37 (4): 971–977. https://doi.org/10.13801/j.cnki.fhclxb.20190612.001.
24. Yan, P. Y., and Z. Q. Zhang. 2017. “Review on hydration of composite cementitious materials.” J. Chin. Ceram. Soc. 45 (8): 1066–1072. https://doi.org/10.14062/j.issn.0454-5648.2017.08.03.
25. 10.1016/j.conbuildmat.2011.07.00710.1016/j.conbuildmat.2011.07.007 ↗
26. 10.1016/j.conbuildmat.2023.13153010.1016/j.conbuildmat.2023.131530 ↗
27. 10.1016/j.conbuildmat.2023.13114010.1016/j.conbuildmat.2023.131140 ↗
28. Zhang, Y. J., S. F. Fu, G. T. Zhang, and L. C. Yan. 2023c. “Study on the influence of molybdenum tailings powder on the strength and microstructure of cement-based materials.” Metal Mine 4: 253–259. https://doi.org/10.19614/j.cnki.jsks.202304038.
29. 10.1016/j.conbuildmat.2021.12429610.1016/j.conbuildmat.2021.124296 ↗
30. Zhu, J. L., J. W. Song, L. Wang, L. N. Xiao, and F. H. Liu. 2020. “Hydration heat and kinetics of copper slag powder-cement composite cementitious system.” J. Build. Mater. 23 (6): 1282–1288. https://doi.org/10.3969/j.issn.1007-9629.2020.06.004.