Alkali silica reactivity of agglomerated silica fume
Source abstract
Abstract
It is commonly accepted that replacement of a portion of cement in mortar or concrete with well-dispersed silica fume reduces expansion caused by alkali silica reaction. Recently there has been much discussion that large, agglomerated particles of silica fume may actually act as alkali silica reactive aggregates, thereby increasing expansion rather than reducing it. The data in the literature, from both field and laboratory studies, are inconsistent. This prompted an extensive laboratory investigation into the alkali silica reactivity of silica fume. Results from accelerated expansion testing and microscopic investigations are presented. It was seen that some agglomerated silica fumes participate in ASR while others do not. Factors determining the reactivity of silica fume agglomerates are suggested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Expansion of concrete through reaction between cement and aggregate
2. Influence of silica fume replacement of cement on physical properties and resistance to sulfate attack, freezing and thawing, and alkali–silica reactivity
3. Studies in cement–aggregate reaction. XIX: the effect of mortar expansion on the particle size of the reactive component in the aggregate
4. The effectiveness of supplementary cementing materials in suppressing expansion due to ASR: another look at the reaction mechanisms. Part I: concrete expansion and portlandite depletion10.1016/0008-8846(94)90084-1 ↗
5. Silica fume in concrete — 16 years of experience in Iceland
6. Occurrence of large silica fume-derived particles in hydrated cement paste10.1016/0008-8846(92)90036-U ↗
7. Alkali–silica reactions — some paradoxes10.1016/S0958-9465(97)00004-8 ↗
8. Alkali–silica reactivity of large silica fume-derived particles10.1016/j.cemconres.2004.01.001 ↗
9. A.J. Maas, Effects of Low-Level Silica Fume Replacement in ASTM C 1260 and ASTM C 227 Mortar-Bar Testing, M.S. Thesis, The University of Texas at Austin, 2004.
10. Effects of silica fume on alkali–silica expansion in mortar specimens10.1016/0008-8846(92)90131-E ↗
11. Durability of DSP mortars exposed to conditions of wetting and drying
12. Case study of alkali–silica reaction due to silica-fume pellets in a mortar repair
13. Alkali silica reaction in concrete caused by densified silica fume lumps: a case study10.1520/CCA10468J ↗
14. Silica granulates in concrete — dispersion and durability aspects
15. Morphological, mineralogical and chemical features of steam-cured concretes containing densified silica fume and various alkali levels10.1680/adcr.1993.5.20.151 ↗
16. Reaction products of densified silica fume agglomerates in concrete10.1016/j.cemconres.2004.01.031 ↗
17. Evaluation of the potential of densified silica fume to cause alkali–silica reaction in cementitious matrices using a modified ASTM C 1260 test procedure10.1520/CCA10475J ↗
18. The feasibility of using silica fume to control concrete expansion due to alkali–aggregate reactions
19. Effectiveness of various silica fumes in preventing alkali–silica expansion
20. The effect of product form of silica fume on its ability to control alkali–silica reaction10.1016/S0008-8846(00)00297-0 ↗
21. A. Boddy, Issues related to silica fume dispersion in concrete
22. Competitive nature of alkali–silica fume and alkali–aggregate (silica) reaction10.1680/macr.1992.44.161.235 ↗
23. Standard test method for potential alkali reactivity of aggregates (mortar-bar method)
24. Standard test method for potential alkali reactivity of cement/aggregate combinations (mortar-bar method)
25. ASTM C 150-04a, Standard specification for portland cement · 2005
26. Standard test method for bulk density (“unit weight”) and voids in aggregate
27. Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency
28. Why the accelerated mortar bar method ASTM C 1260 is reliable for evaluating the effectiveness of supplementary cementing materials in suppressing expansion due to alkali–silica reactivity10.1520/CCA10333J ↗
29. Use of the accelerated mortar bar test for evaluating the efficacy of mineral admixtures for controlling expansion due to alkali–silica reaction10.1520/CCA10429J ↗
30. Standard specification for concrete aggregates
31. Does silica fume merely postpone expansion due to alkali–aggregate reactivity?10.1016/0950-0618(93)90050-M ↗
32. Standard test method for determination of length change of concrete due to alkali–silica reaction
33. Assessing aggregate reactivity using the accelerated concrete prism test
34. J.H. Ideker, K.J. Folliard, Toward accurate test methods to assess alkali–silica reaction in concrete,” unpublished manuscript.
35. Test methods for evaluating preventive measures for controlling expansion due to alkali–silica reaction in concrete10.1016/j.cemconres.2006.01.014 ↗
36. Reduction in mortar and concrete expansion with reactive aggregates due to alkali leaching10.1520/CCA10548J ↗
37. Hobbs · 1988 · 35
38. An accelerated method for testing the potential alkali reactivity of siliceous aggregates10.1016/0008-8846(86)90134-1 ↗
39. Effect of cement and added NaOH on measured expansions in ASTM C 1260 tests
40. C. Tremblay, M.A. Bérubé, B. Fournier, M.D.A. Thomas, K.J. Folliard, Use of the accelerated mortar bar test to evaluate the effectiveness of LiNO3 against alkali–silica reaction. Part 2: Comparison with the concrete prism test results, unpublished manuscript.