journal article·2010-10

Synergistic effect of combined fibers for spalling protection of concrete in fire

Young-Sun Heo, Jay G. Sanjayan, Cheon-Goo Han, Min-Cheol Han

Cement and Concrete Research· Volume 40· Issue 10
Publisher page

Abstract

Abstract This study demonstrates the synergistic effect of some particular combination of fibers that can provide significantly better spalling protection of concrete in a fire than single fiber by themselves at the same fiber content level. Various combinations of polypropylene, polyvinyl alcohol, cellulose and nylon fibers were investigated. Fire tests were conducted in accordance with ISO-834. The combination of nylon (9 mm length) and polypropylene (19 mm length) fibers found to provide the most optimum results. By combining these two fibers, the same level of spalling protection was achieved by three times less fiber content than the single type of 0.10% polypropylene fiber commonly prescribed. A “fiber effectiveness parameter” is proposed which is a function of total number of fibers per unit volume and length of fiber. This parameter is useful in providing quantitative explanations of various fiber additions and their spalling results in fire.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Engineering and Material Science Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Fire Resistant Performance of High Strength Concrete
2. Spalling of high-strength silica fume concrete in fire
3. Spalling and pore pressure in HPC at high temperatures10.1016/S0008-8846(00)00384-7 ↗
4. Effect of strength and fiber reinforcement on the fire resistance of high strength concrete columns10.1061/(ASCE)0733-9445(2003)129:2(253) ↗
5. Effects of test conditions and mixture proportions on behavior of high-strength concrete expose to high temperature
6. Mechanical properties and microstructure of high strength concrete containing polypropylene fibers exposed to temperature up to 200°C10.1016/j.cemconres.2005.03.007 ↗
7. Spalling prevention of high strength concrete with 60–100MPa of the compressive strength corresponding to addition of polypropylene fiber
8. Stregnth properties of nylon- and polypropylene-fiber-reinforced concretes10.1016/j.cemconres.2004.06.033 ↗
9. Y.S. Heo, Influential factors on fire resistance performance of ultra high strength concrete and mechanism models of spalling phenomenon. Master thesis, Cheongju University Korea 2006.
10. Effect of Fiber Type, Length and Numbers of Fibers per Unit Volume on Spalling Protection of High Strength Concrete
11. Fibres, percolation, and spalling of high-performance concrete
12. High-temperature behaviour of HPC with polypropylene fibers from spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
13. Ministry of Land, Transport & Maritime Affairs · 2009 · 111
14. Spalling and Mechanical Properties of High Strength Concrete at High Temperature
15. Performance of spalling resistance of high performance concrete with polypropylene fiber contents and lateral confinement10.1016/j.cemconres.2004.11.013 ↗
16. Improvement of residual compressive strength and spalling resistance of high-strength RC columns subjected to fire10.1016/j.conbuildmat.2008.01.011 ↗
17. New PP-fiber with Exceptional Melting Characteristics for Improved Fiber Protection in Concrete Building