The Enhanced Corrosion Resistance of Harmonic Structured Cantor Alloy in Hank’s Simulated Body Fluid
Source abstract
Abstract
Present study deals with the corrosion behavior of a harmonic structured Cantor alloy (FeCrMnNiCo) in freely aerated Hank’s simulated body fluid. Harmonic structure featuring distinguished core regions containing clusters of coarse grains and shell regions containing a continuous network of fine grains is attained by powder metallurgical route. X-ray diffraction confirmed FCC structure both in the core and shell regions. Corrosion tests were carried out on the harmonic structured Cantor alloy and compared with its conventional counterpart and harmonic structured 316L stainless steel, a well-known biomaterial. The corrosion resistance of the harmonic structured Cantor alloy is found to be better than the conventional one and comparable to the harmonic structured 316L stainless steel. During corrosion, enrichment of Cr at the shell regions of the harmonic structured Cantor alloy allows early passivation, leading to its enhanced corrosion resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · High Entropy Alloys Studies · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. G.E. Dieter, Mechanical Metallurgy, SI Metric Edition, McGraw-Hill Book Company, London, 1988.
2. K.D. Ralston and N. Birbilis, Effect of Grain Size on Corrosion: A Review, Corrosion, 2010, 66(7), p 075005–075005.10.5006/1.3462912 ↗
3. M. Ota, K. Shimojo, S. Okada, S.K. Vajpai, and K. Ameyama, Harmonic Structure Design and Mechanical Properties of Pure Ni Compact, J. Powder Metall. Min., 2014, 3, p 1000122.
4. M. Ota, S.K. Vajpai, R. Imao, K. Kurokawa, and K. Ameyama, Application of High Pressure Gas Jet Mill Process to Fabricate High Performance Harmonic Structure Designed Pure Titanium, Mater. Trans., 2015, 56, p 154–159. https://doi.org/10.2320/matertrans.M201428010.2320/matertrans.M2014280 ↗
5. K. Ameyama, F. Cazes, H. Couque, G. Dirras, S. Kikuchi, J. Li, and S.K. Vajpai, Harmonic Structure, A Promising Microstructure Design, Mater. Res. Lett., 2022, 10(7), p 440–471. https://doi.org/10.1080/21663831.2022.205720310.1080/21663831.2022.2057203 ↗
6. S.K. Vajpai, C. Sawangrat, O. Yamaguchi, O.P. Ciuca, and K. Ameyama, Effect of Bimodal Harmonic Structure Design on the Deformation Behaviour and Mechanical Properties of Co-Cr-Mo Alloy, Mater. Sci. Eng. C, 2016, 58, p 1008–1015. https://doi.org/10.1016/j.msec.2015.09.05510.1016/j.msec.2015.09.055 ↗
7. R. Zheng, Z. Zhang, M. Nakatani, M. Ota, X. Chen, C. Ma, and K. Ameyama, Enhanced Ductility in Harmonic Structure Designed SUS316L Produced by High Energy Ball Milling and Hot Isostatic Sintering, Mater. Sci. Eng. A, 2016, 674, p 212–220. https://doi.org/10.1016/j.msea.2016.07.04810.1016/j.msea.2016.07.048 ↗
8. P.K. Rai, S. Shekhar, K. Yagi, K. Ameyama, and K. Mondal, Corrosion Behavior of Harmonic Structured 316L Stainless Steel in 3.5% NaCl and Simulated Body Fluid Solution, J. Mater. Eng. Perform., 2019, 28, p 7554–7564. https://doi.org/10.1007/s11665-019-04428-x10.1007/s11665-019-04428-x ↗
9. B. Cantor, I.T.H. Chang, P. Knight, and A.J.B. Vincent, Microstructural Development in Equiatomic Multicomponent Alloys, Mater. Sci. Eng. A, 2004, 375, p 213–218. https://doi.org/10.1016/j.msea.2003.10.25710.1016/j.msea.2003.10.257 ↗
10. F. Otto, A. Dlouhý, C. Somsen, H. Bei, G. Eggeler, and E.P. George, The Influences of Temperature and Microstructure on the Tensile Properties of a CoCrFeMnNi High-Entropy Alloy, Acta Mater., 2013, 61, p 5743–5755. https://doi.org/10.1016/j.actamat.2013.06.01810.1016/j.actamat.2013.06.018 ↗
11. N. Stepanov, M. Tikhonovsky, N. Yurchenko, D. Zyabkin, M. Klimova, S. Zherebtsov, A. Efimov, and G. Salishchev, Effect of Cryo-Deformation on Structure and Properties of CoCrFeNiMn High-Entropy Alloy, Intermetallics, 2015, 59, p 8–17. https://doi.org/10.1016/j.intermet.2014.12.00410.1016/j.intermet.2014.12.004 ↗
12. H. Luo, Z. Li, A.M. Mingers, and D. Raabe, Corrosion Behavior of an Equiatomic CoCrFeMnNi High-Entropy Alloy Compared with 304 Stainless Steel in Sulfuric Acid Solution, Corr. Sci., 2018, 134, p 131–139. https://doi.org/10.1016/j.corsci.2018.02.03110.1016/j.corsci.2018.02.031 ↗
13. S. Pathak, N. Kumar, R.S. Mishra, and P.S. De, Aqueous Corrosion Behavior of Cast CoCrFeMnNi Alloy, J. Mater. Eng. Perform., 2019, 28, p 5970–5977. https://doi.org/10.1007/s11665-019-04329-z10.1007/s11665-019-04329-z ↗
14. D. Banik, B. Bhushan, S. Mukherjee, H. Fujiwara, K. Ameyama, and K. Mondal, Effect of Harmonic Structure on the Electrochemical Behavior of High Entropy Cantor Alloy in NaCl Solution, Mater. Chem. Phys., 2023 https://doi.org/10.1016/j.matchemphys.2023.12741410.1016/j.matchemphys.2023.127414 ↗
15. C. Morsiya, A Review on Parameters Affecting Properties of Biomaterial SS 316L, Aust. J. Mech. Eng., 2022, 22, p 803–813. https://doi.org/10.1080/14484846.2020.175297510.1080/14484846.2020.1752975 ↗
16. Z. Han, P. Zhang, L. Lei, S. Liang, Q. Wang, Y. Lai, and J. Li, Morphology and Particle Analysis of the Ni3Al-Based Spherical Powders Manufactured by Supreme-Speed Plasma Rotating Electrode Process, J. Mater. Res. Technol., 2020, 9, p 13937–13944. https://doi.org/10.1016/j.jmrt.2020.09.10210.1016/j.jmrt.2020.09.102 ↗
17. G. ASTM, Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements, ASTM International, Pennsylvania, 2014.
18. R. Joham, N.K. Sharma, K. Mondal, and S. Shekhar, Low Temperature Cross-Rolling to Modify Grain Boundary Character Distribution and Its Effect on Sensitization of SS304, J. Mater. Process. Technol., 2017, 240, p 324–331. https://doi.org/10.1016/j.jmatprotec.2016.10.01410.1016/j.jmatprotec.2016.10.014 ↗
19. P. Atanda, A. Fatudimu, and O. Oluwole, Sensitisation Study of Normalized 316L Stainless Steel, J. Miner. Mater. Charact. Eng., 2010, 9, p 13–23. https://doi.org/10.4236/jmmce.2010.9100210.4236/jmmce.2010.91002 ↗
20. M.E. Orazem and B. Tribollet, Electrochemical Impedance Spectroscopy, Wiley, Heidelberg, 2008.10.1002/9780470381588 ↗
21. Z. Lukács and T. Kristóf, A Generalized Model of the Equivalent Circuits in the Electrochemical Impedance Spectroscopy, Electrochim. Acta, 2020, 363, p 137199. https://doi.org/10.1016/j.electacta.2020.13719910.1016/j.electacta.2020.137199 ↗
22. J. Alcántara, B. Chico, J. Simancas, I. Díaz, D. de la Fuente, and M. Morcillo, An Attempt to Classify the Morphologies Presented by Different Rust Phases Formed During the Exposure of Carbon Steel to Marine Atmospheres, Mater. Charact., 2016, 118, p 65–78. https://doi.org/10.1016/j.matchar.2016.04.02710.1016/j.matchar.2016.04.027 ↗
23. U. Schwertmann, H. Stanjek, and H.H. Becher, Long-Term In Vitro Transformation of 2-Line Ferrihydrite to Goethite/Hematite at 4, 10, 15 and 25°C, Clay Miner., 2004, 39, p 433–438. https://doi.org/10.1180/000985504394014510.1180/0009855043940145 ↗
24. M. Mohammadtaheri, Q. Yang, Y. Li, and J. Corona-Gomez, The Effect of Deposition Parameters on the Structure and Mechanical Properties of Chromium Oxide Coatings Deposited by Reactive Magnetron Sputtering, Coatings, 2018, 8, p 111. https://doi.org/10.3390/coatings803011110.3390/coatings8030111 ↗
25. J.R. Genin, L. Dhouibi, P. Refait, M. Abdelmoula, and E. Triki, Influence of Phosphate on Corrosion Products of Iron in Chloride-Polluted-Concrete-Simulating Solutions: Ferrihydrite vs Green Rust, Corrosion, 2002, 58(6), p 467–478. https://doi.org/10.5006/1.327763710.5006/1.3277637 ↗
26. A. Tanji, F. Gapsari, A. Syahrom, M.H. Idris, and H. Hermawan, Effect of Mo Addition on the Pitting Resistance of TiMn Alloys in Hanks’ Solution, J. Alloys Compd., 2021, 871, p 159582. https://doi.org/10.1016/j.jallcom.2021.15958210.1016/j.jallcom.2021.159582 ↗
27. X.Y. Gu, Y.N. Dong, and Y.X. Zhuang, Microstructure and Mechanical Properties of CoCrFeMnNiSnx High-Entropy Alloys, Met. Mater. Int., 2020, 26, p 292–301. https://doi.org/10.1007/s12540-019-00328-w10.1007/s12540-019-00328-w ↗
28. P.K. Rai, S. Shekhar, K. Yagi, K. Ameyama, and K. Mondal, Fretting Wear Mechanism for Harmonic, Non-Harmonic and Conventional 316L Stainless Steels, Wear, 2019, 424–425, p 23–32. https://doi.org/10.1016/j.wear.2019.02.00510.1016/j.wear.2019.02.005 ↗