journal article·2011-11

Homogeneity of Mechanical Properties of Underwater Friction Stir Welded 2219-T6 Aluminum Alloy

H. J. Liu, H. J. Zhang, L. Yu

Publisher page

Abstract

Underwater friction stir welding (FSW) has been demonstrated to be available for the improvement in tensile strength of normal FSW joints. In order to illuminate the intrinsic reason for strength improvement through underwater FSW, a 2219 aluminum alloy was underwater friction stir welded and the homogeneity of mechanical properties of the joint was investigated by dividing the joint into three layers. The results indicate that the tensile strength of the three layers of the joint is all improved by underwater FSW, furthermore, the middle and lower layers have larger extent of strength improvement than the upper layer, leading to an increase in the homogeneity of mechanical properties of the joint. The minimum hardness value of each layer, especially the middle and lower layers, is improved under the integral water cooling effect, which is the intrinsic reason for the strength improvement of underwater joint.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. M.R. Johnsen, Friction Stir Welding Takes Off at Boeing, Weld. J., 1999, 78, p 35–39
2. D. Joelj, The Friction Stir Welding Advantage, Weld. J., 2001, 80, p 30–34
3. W.B. Lee, Y.M. Yeon, and S.B. Jung, The Improvement of Mechanical Properties of Friction-Stir Welded A356 Al Alloy, Mater. Sci. Eng. A, 2003, 355, p 154–15910.1016/S0921-5093(03)00053-4 ↗
4. R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng. Rep., 2005, 50, p 1–7810.1016/j.mser.2005.07.001 ↗
5. R.W. Fonda and J.F. Bingert, Microstructural Evolution in the Heat-Affected Zone of a Friction Stir Weld, Metall. Mater. Trans. A, 2004, 35, p 1487–149910.1007/s11661-004-0257-7 ↗
6. L.E. Svensson, L. Karlsson, H. Larsson, B. Karlsson, M. Fazzini, and J. Karlsson, Microstructure and Mechanical Properties of Friction Stir Welded Aluminum Alloys with Special Reference to AA 5083 and AA 6082, Sci. Technol. Weld. Join., 2000, 5, p 285–29610.1179/136217100101538335 ↗
7. M.J. Starink, A. Seschamps, and S.C. Wang, The Strength of Friction Stir Welded and Friction Stir Processed Aluminum Alloys, Scripta Mater., 2008, 58, p 377–38210.1016/j.scriptamat.2007.09.061 ↗
8. K. Elangovan, V. Balasubramanian, and S. Babu, Developing an Empirical Relationship to Predict Tensile Strength of Friction Stir Welded AA2219 Aluminum Alloy, JMEPEG, 2008, 17, p 820–83010.1007/s11665-008-9240-6 ↗
9. V. Dixit, R.S. Mishra, R.J. Lederich, and R. Talwar, Influence of Process Parameters on Microstructural Evolution and Mechanical Properties in Friction Stirred Al-2024 (T3) Alloy, Sci. Technol. Weld. Join., 2009, 14, p 346–35510.1179/136217109X415910 ↗
10. S. Benavides, Y. Li, L.E. Murr, D. Brown, and J.C. McClure, Low-Temperature Friction-Stir Welding of 2024 Aluminum, Scripta Mater., 1999, 41, p 809–81510.1016/S1359-6462(99)00226-2 ↗
11. L. Fratini, G. Buffa, and R. Shivpuri, In-Process Heat Treatments to Improve FS-Welded Butt Joints, Int. J. Adv. Manuf. Technol., 2009, 43, p 664–67010.1007/s00170-008-1750-8 ↗
12. L. Fratini, G. Buffa, and R. Shivpuri, Mechanical and Metallurgical Effects of in Process Cooling during Friction Stir Welding of AA7075–T6 Butt Joints, Acta Mater., 2010, 58, p 2056–206710.1016/j.actamat.2009.11.048 ↗
13. H.J. Liu, H.J. Zhang, Y.X. Huang, and L. Yu, Mechanical Properties of Underwater Friction Stir Welded 2219 Aluminum Alloy, Trans. Nonferrous Met. Soc. China, 2010, 20, p 1387–139110.1016/S1003-6326(09)60309-5 ↗
14. S.B. Lin, Y.H. Zhao, and L. Wu, Integral and Layered Mechanical Properties of Friction Stir Welded Joints of 2014 Aluminum Alloy, Mater. Sci. Technol., 2006, 22, p 995–99810.1179/174328406X102408 ↗
15. H.J. Liu, H. Fujii, M. Maeda, and K. Nogi, Heterogeneity of Mechanical Properties of Friction Stir Welded Joints of 1050–H24 Aluminum Alloy, J. Mater. Sci. Lett., 2003, 22, p 441–44410.1023/A:1022959627794 ↗
16. W.F. Xu, J.H. Liu, G.H. Luan, and C.L. Dong, Temperature Evolution, Microstructure and Mechanical Properties of Friction Stir Welded Thick 2219-O Aluminum Alloy Joints, Mater. Des., 2009, 30, p 1886–189310.1016/j.matdes.2008.09.021 ↗