Determination of Critical Dynamic Recrystallization Conditions and Mechanism Analysis of Ti600 High-Temperature Titanium Alloy
Source abstract
Abstract
The dynamic recrystallization behavior of a high-temperature titanium alloy Ti600 has been investigated by hot compression tests at the strain rates of 0.001-10 s−1 and temperatures of 950-1010 °C. The grain boundary migration during deformation has been analyzed, and a critical DRX dislocation density associated with material essence and grain boundary mobility has been proposed to identify the main softening mechanism of Ti600. Additionally, JMAK model has been employed to describe the dynamic recrystallization behavior, which is essential to concerned dynamic recrystallization with material and deformation parameters to investigate the dynamic recrystallization behavior of Ti600. The activation energy QSRX has been calculated as 91.18 kJ. Finally, processing map has been established, and the optimal process window has been present. And EBSD experiments at different temperatures and strain rates have been conducted to deeply study the grain boundary distribution and crystal orientation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. D. Giugliano, N.-K. Cho, H. Chen, and L. Gentile, Cyclic Plasticity and Creep-Cyclic Plasticity Behaviours of the SiC/Ti-6242 Particulate Reinforced Titanium Matrix Composites under Thermo-Mechanical Loadings, Compos. Struct., 2019, 218, p 204–21610.1016/j.compstruct.2019.03.030 ↗
2. S. Waheed, Z. Zheng, D.S. Balint, and F.P.E. Dunne, Microstructural Effects on Strain Rate and Dwell Sensitivity in Dual-Phase Titanium Alloys, Acta Mater., 2019, 162, p 136–14810.1016/j.actamat.2018.09.035 ↗
3. J. Li, Y. Han, D. Yang, and J. Mao, Effect of Heat Treatment on Creep Properties of In Situ Synthesized (TiB + La2O3)/Ti Composite, Front. Mater., 2019, 6, p 1–1010.3389/fmats.2019.00001 ↗
4. J. Che, B. Jiang, Q. Wang, C. Dong, G. Chen, R. Zhang, R. Tang, F. Xu, and L. Sun, Effects of Minor Additions of Elements into Ti1100 on Elevated Temperature Oxidation- and Corrosion-Resistance, Rare Met. Mater. Eng., 2018, 47(5), p 1471–1477
5. W.J. Zhang, X.Y. Song, S.X. Hui, W.J. Ye, Y.L. Wang, and W.Q. Wang, Tensile Behavior at 700°C in Ti-Al-Sn-Zr-Mo-Nb-W-Si Alloy with a Bi-modal Microstructure, Mater. Sci. Eng., A, 2014, 595, p 159–16410.1016/j.msea.2013.11.096 ↗
6. C. Ding, Q. Shi, X. Liu, L. Zheng, R. Li, Z. Hang, B. Yu, and W. Wu, Microstructure and Mechanical Properties of PM Ti600 Alloy after Hot Extrusion and Subsequent Annealing Treatment, Mater. Sci. Eng., A, 2019, 748, p 434–44010.1016/j.msea.2019.01.099 ↗
7. R. Jia, W. Zeng, S. He, X. Gao, and J. Xu, The Analysis of Fracture Toughness and Fracture Mechanism of Ti60 Alloy under Different Temperatures, J. Alloy. Compd., 2019, 810, p 1–1010.1016/j.jallcom.2019.151899 ↗
8. N. Cui, Q. Wu, J. Wang, B. Lv, and F. Kong, The Directional Solidification, Microstructural Characterization and Deformation Behavior of -Solidifying TiAl Alloy, Materials, 2019, 12(8), p 1–1110.3390/ma12081203 ↗
9. S.F. Jawed, C.D. Rabadia, Y.J. Liu, L.Q. Wang, Y.H. Li, X.H. Zhang, and L.C. Zhang, Mechanical Characterization and Deformation Behavior of Beta-Stabilized Ti-Nb-Sn-Cr Alloys, J. Alloy. Compd., 2019, 792, p 684–69310.1016/j.jallcom.2019.04.079 ↗
10. W. Chen, C. Li, X. Zhang, C. Chen, Y.C. Lin, and K. Zhou, Deformation-Induced Variations in Microstructure Evolution and Mechanical Properties of Bi-modal Ti-55511 Titanium Alloy, J. Alloy. Compd., 2019, 783, p 709–71710.1016/j.jallcom.2018.12.262 ↗
11. M.R. Barnett, G.L. Kelly, and P.D. Hodgson, Predicting the Critical Strain for Dynamic Recrystallization Using the Kinetics of Static Recrystallization, Scr. Mater., 2000, 43(4), p 365–36910.1016/S1359-6462(00)00424-3 ↗
12. V. Shkatov and I. Mazur, Modeling the Dynamic Recrystallization and Flow Curves Using the Kinetics of Static Recrystallization, Materials, 2019, 12(18), p 3024–303310.3390/ma12183024 ↗
13. B. Fang, Z. Ji, M. Liu, G. Tian, C. Jia, T. Zeng, B. Hu, and Y. Chang, Critical Strain and Models of Dynamic Recrystallization for FGH96 Superalloy during Two-Pass Hot Deformation, Mater. Sci. Eng., A, 2014, 593, p 8–1510.1016/j.msea.2013.11.016 ↗
14. W. Zhou, P. Ge, Q. Li, S. Xin, and J. Chen, Critical Conditions for Dynamic Recrystallization of Ti-5553 Alloy during Hot Deformation, Rare Metal Mater. Eng., 2016, 45(7), p 1732–1735
15. X. Wang, K. Chandrashekhara, S.N. Lekakh, D.C. Van Aken, R.J. O’Malley. Modeling and Simulation of Dynamic Recrystallization Behavior in Alloyed Steel 15V38 during Hot Rolling. Steel Res. Int. 2019, 90 (4), Article ID 1700565.
16. C. Duan, F. Zhang, S. Qin, W. Sun, and M. Wang, Modeling of Dynamic Recrystallization in White Layer in Dry Hard Cutting by Finite Elementcellular Automaton Method, J. Mech. Sci. Technol., 2018, 32(9), p 4299–431210.1007/s12206-018-0828-y ↗
17. H. Mecking and U.F. Kocks, Kinetics of Flow and Strain-Hardening, Acta Meter., 1981, 29(11), p 1865–187510.1016/0001-6160(81)90112-7 ↗
18. R. Sandström and R. Lagneborg, A Model for Hot Working Occuring by Recrystallization, Scripta Meter., 1974, 8(11), p 378–398
19. W. Chuan, Y. He, and L.H. Wei, Modeling of Discontinuous Dynamic Recrystallization of a Near-α Titanium Alloy IMI834 during Isothermal Hot Compression by Combining a Cellular Automaton Model with a Crystal Plasticity Finite Element Method, Comput. Mater. Sci., 2013, 79, p 944–95910.1016/j.commatsci.2013.08.004 ↗
20. D. Banerjee, The Intermetallic Ti2AlNb, Prog. Mater Sci., 1997, 42(1–4), p 135–13810.1016/S0079-6425(97)00012-1 ↗
21. A.R.F.H.G.S.R.M. Hatherly, Recrystallization and Related Annealing Phenomena, Elsvier, Amsterdam, 2004, p 658
22. R.B.N. Godiksen, S. Schmidt, and D.J. Jensen, Molecular Dynamics Simulations of Grain Boundary Migration during Recrystallization Employing Tilt and Twist Dislocation Boundaries to Provide the Driving Pressure, Model. Simul. Mater. Sci., 2008, 16(6), p 06500210.1088/0965-0393/16/6/065002 ↗
23. S. Shahandeh and M. Militzer, Grain Boundary Curvature and Grain growth Kinetics with Particle Pinning, Philos. Mag., 2013, 93(24), p 3231–324710.1080/14786435.2013.805277 ↗
24. S.Y. Wei, W.M. Shi, D.C. Wang, Q.J. Wang, Z.Y. Chen, and J.R. Liu, Microstructure and Mechanical Properties of High Temperature Titanium Alloy Ti60 at 600°C, Chin. J. Nonferrous Met., 2010, 2010, p 801–806 (in Chinese)
25. W.A. Gang, D.C. Zeng, and Z.W. Liu, Phase Field Calculation of Interface Mobility in a Ternary Alloy, Chin. J. Nonferrous. Met., 2012, 22(7), p 1711–171610.1016/S1003-6326(11)61377-0 ↗
26. P.A. Beck and P.R. Sperry, Strain Induced Grain Boundary Migration in High Purity Aluminum, J. Appl. Phys., 1950, 21(2), p 150–15210.1063/1.1699614 ↗
27. T.A. Roth and P. Suppayak, The Surface and Grain Boundary Free Energies of Pure Titanium and the Titanium Alloy Ti-6Al-4 V, Mater. Sci. Eng., 1978, 35(2), p 187–19610.1016/0025-5416(78)90120-9 ↗
28. M. Murzinova, Effect of Temperature on the Specific Energy of β/α Interfaces in Ti-6Al-4V Alloy, Lett. Mater., 2017, 7(1), p 55–5910.22226/2410-3535-2017-1-55-59 ↗
29. J. Zhang, J. Wu, Y. Luo, X. Mao, D. Guo, S. Zhao, and F. Yang, Hot Deformation Mechanisms of Ti22Al25Nb Orthorhombic Alloy, J. Mater. Eng. Perform., 2019, 28(2), p 973–98010.1007/s11665-019-3858-4 ↗
30. Y.C. Lin, J. Huang, H.-B. Li, and D.-D. Chen, Phase Transformation and Constitutive Models of a Hot Compressed TC18 Titanium Alloy in the α + β Regime, Vacuum, 2018, 157, p 83–9110.1016/j.vacuum.2018.08.020 ↗
31. J.J. Jonas, X. Quelennec, L. Jiang, and É. Martin, The Avrami Kinetics of Dynamic Recrystallization, Acta Mater., 2009, 57(9), p 2748–275610.1016/j.actamat.2009.02.033 ↗
32. Y.C. Lin, M.-S. Chen, and J. Zhong, Study of Static Recrystallization Kinetics in a Low Alloy Steel, Comp. Mater. Sci., 2008, 44(2), p 316–32110.1016/j.commatsci.2008.03.027 ↗
33. H. Liang, H. Guo, Y. Ning, X. Peng, C. Qin, Z. Shi, and Y. Nan, Dynamic Recrystallization Behavior of Ti–5Al–5Mo–5 V–1Cr–1Fe Alloy, Mater. Des., 2014, 63, p 798–80410.1016/j.matdes.2014.06.064 ↗
34. M.S. Kawabe, Strengthening capability of beta titanium alloys. PA:TMS: Warrendale, 1993.
35. K. Yamanaka, H. Matsumoto, and A. Chiba, A Constitutive Model and Processing Maps Describing the High-Temperature Deformation Behavior of Ti-17 Alloy in the Beta-Phase Field, Adv. Eng. Mater., 2019, 21(2), p 80077510.1002/adem.201800775 ↗
36. C.L. Li, P.L. Narayana, N.S. Reddy, S.W. Choi, J.T. Yeom, J.K. Hong, and C.H. Park, Modeling Hot Deformation Behavior of Low-Cost Ti-2Al-9.2Mo-2Fe Beta Titanium Alloy using a Deep Neural Network, J. Mater. Sci. Technol., 2019, 35(5), p 907–91610.1016/j.jmst.2018.11.018 ↗
37. Y.Q. Jiang, Y.C. Lin, G.D. Pang, D.G. He, and N. Kotkunde, Constitutive Model and Processing Maps for a Ti-55511 Alloy in beta Region, Adv. Eng. Mater., 2019, 2019, p 1900930
38. L. Ma, M. Wan, W. Li, J. Shao, and X. Bai, Constitutive Modeling and Processing Map for Hot Deformation of Ti–15Mo–3Al-2.7Nb-0.2Si, J. Alloy. Compd., 2019, 808, p 1–1310.1016/j.jallcom.2019.02.044 ↗
39. I. Weiss, F.H. Froes, D. Eylon, and G.E.J.M.T.A. Welsch, Modification of Alpha Morphology in Ti-6Al-4 V by Thermomechanical Processing, Metall. Mater. Trans. A, 1986, 17(11), p 1935–194710.1007/BF02644991 ↗
40. T. Seshacharyulu, S.C. Medeiros, J.T. Morgan, J.C. Malas, W.G. Frazier, and Y.V.R.K. Prasad, Hot Deformation and Microstructural Damage Mechanisms in Extra-Low Interstitial (ELI) Grade Ti–6Al–4V, Mater. Sci. Eng., A, 2000, 279(1), p 289–29910.1016/S0921-5093(99)00173-2 ↗