Experimental Determination and Theoretical Prediction of Limiting Strains for ASS 316L at Hot Forming Conditions
Source abstract
Abstract
In the present work, the austenitic stainless steel 316L is used for determining the forming limit diagrams (FLDs) at hot forming conditions. Firstly, the theoretical prediction of flow stress was done using Johnson-Cook and modified Zerilli-Armstrong (m-ZA) constitutive equations at three test temperatures (750, 825 and 900 °C). It was found that the m-ZA model displayed better predictability of flow stress. Additionally, Hill 1948 and Barlat 1989 yielding functions have been formulated, and it was found that Barlat 1989 displays better-yielding behavior predictability at all considered temperatures. Further, the Nakazima test has been used to find the experimental FLD. The limiting strains of the material displayed an improvement of approximately 57% with an increase in temperature from 750 °C to 900 °C. The Marciniak-Kuczynski (M-K) model has been used for theoretical prediction of FLD and it was found that the combination of Barlat 1989 function with m-ZA model displayed the best FLD prediction ability at all the considered temperatures with an error of approximately 5%. Further, the limiting dome height, surface strain and thickness distribution have been found at all the testing temperatures. The fractographic study revealed a ductile type of failure for all the specimens at all the temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. A.K. Gupta, H.N. Krishnamurthy, Y. Singh, K.M. Prasad, and S.K. Singh, Development of Constitutive Models for Dynamic Strain Aging Regime in Austenitic Stainless Steel 304, Mater. Des., 2013, 45, p 616–627. https://doi.org/10.1016/j.matdes.2012.09.04110.1016/j.matdes.2012.09.041 ↗
2. X.Y. Wang and D.Y. Li, Mechanical, Electrochemical and Tribological Properties of Nano-Crystalline Surface of 304 Stainless Steel, Wear, 2003, 255(7), p 836–845. https://doi.org/10.1016/S0043-1648(03)00055-310.1016/S0043-1648(03)00055-3 ↗
3. M.C. Somani and L.P. Karjalainen, Effects of Complex Deformation History on Flow Stress and Recrystallisation of Hot Deformed Austenite and Ferrite, Ironmaking & Steelmaking, Taylor & Francis, 2005, 32(4), p 294–298. https://doi.org/10.1179/174328105X4590110.1179/174328105X45901 ↗
4. S. Pandre, N. Kotkunde, P. Takalkar, A. Morchhale, R. Sujith, and S.K. Singh, Flow Stress Behavior, Constitutive Modeling, and Microstructural Characteristics of DP 590 Steel at Elevated Temperatures, J. of Materi Eng and Perform, 2019, 28(12), p 7565–7581. https://doi.org10.1007/s11665-019-04497-y10.1007/s11665-019-04497-y ↗
5. A. Badrish, A. Morchhale, N. Kotkunde, and S.K. Singh, Influence of Material Modeling on Warm Forming Behavior of Nickel Based Super Alloy, Int J Mater Form, 2020, https://doi.org/10.1007/s12289-020-01548-x10.1007/s12289-020-01548-x ↗
6. N. Kotkunde, A. Badrish, A. Morchhale, P. Takalkar, and S.K. Singh, Warm Deep Drawing Behavior of Inconel 625 Alloy Using Constitutive Modelling and Anisotropic Yield Criteria, Int J Mater Form, 2019, https://doi.org/10.1007/s12289-019-01505-310.1007/s12289-019-01505-3 ↗
7. C.A. Badrish, A. Morchhale, N. Kotkunde, S.K. Singh, (2020) Prediction of flow stress using integrated JC-ZA constitutive model for Inconel 625 alloy. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.02.140.10.1007/s12289-019-01505-3 ↗
8. Y.C. Lin and X.-M. Chen, A Combined Johnson-Cook and Zerilli-Armstrong Model for Hot Compressed Typical High-Strength Alloy Steel, Comput. Mater. Sci., 2010, 49(3), p 628–633. https://doi.org/10.1016/j.commatsci.2010.06.00410.1016/j.commatsci.2010.06.004 ↗
9. Y.C. Lin and X.-M. Chen, A Critical Review of Experimental Results and Constitutive Descriptions for Metals and Alloys in Hot Working, Mater. Des., 2011, 32(4), p 1733–1759. https://doi.org/10.1016/j.matdes.2010.11.04810.1016/j.matdes.2010.11.048 ↗
10. Y.C. Lin, X.-Y. Jiang, C. Shuai, C.-Y. Zhao, D.-G. He, M.-S. Chen, and C. Chen, Effects of Initial Microstructures on Hot Tensile Deformation Behaviors and Fracture Characteristics of Ti-6Al-4 V Alloy, Mater. Sci. Eng., A, 2018, 711, p 293–302. https://doi.org/10.1016/j.msea.2017.11.04410.1016/j.msea.2017.11.044 ↗
11. J.M. Cabrera, A. Al Omar, J.M. Prado, and J.J. Jonas, Modeling the Flow Behavior of a Medium Carbon Microalloyed Steel under Hot Working Conditions, Metall and Mat Trans A, 1997, 28(11), p 2233–2244. https://doi.org/10.1007/s11661-997-0181-810.1007/s11661-997-0181-8 ↗
12. A. Cingara and H.J. McQueen, New Method for Determining Sinh Constitutive Constants for High Temperature Deformation of 300 Austenitic Steels, J. Mater. Process. Technol., 1992, 36(1), p 17–30. https://doi.org/10.1016/0924-0136(92)90235-K10.1016/0924-0136(92)90235-K ↗
13. A.K. Maheshwari, K.K. Pathak, N. Ramakrishnan, and S.P. Narayan, Modified Johnson-Cook Material Flow Model for Hot Deformation Processing, J. Mater. Sci., 2010, 45(4), p 859–864. https://doi.org/10.1007/s10853-009-4010-x10.1007/s10853-009-4010-x ↗
14. A.K. Gupta, V.K. Anirudh, and S.K. Singh, Constitutive Models to Predict Flow Stress in Austenitic Stainless Steel 316 at Elevated Temperatures, Mater. Des., 2013, 43, p 410–418. https://doi.org/10.1016/j.matdes.2012.07.00810.1016/j.matdes.2012.07.008 ↗
15. A. Badrish, A. Morchhale, N. Kotkunde, and S.K. Singh, Parameter Optimization in the Thermo-Mechanical V-Bending Process to Minimize Springback of Inconel 625 Alloy, Arab J Sci Eng, 2020, https://doi.org/10.1007/s13369-020-04395-910.1007/s13369-020-04395-9 ↗
16. C.A. Badrish, A. Morchhale, N. Kotkunde, and S.K. Singh, Experimental and Finite Element Studies of Springback Using Split-Ring Test for Inconel 625 Alloy, Advances in Materials and Processing Technologies, 2020, https://doi.org/10.1080/2374068X.2020.172864410.1080/2374068X.2020.1728644 ↗
17. N. Sen, Experimental Investigation of the Formability of Ultrahigh-Strength Sheet Material Using Local Heat Treatment, Ironmak. Steelmak., 2020, 47(2), p 93–99. https://doi.org/10.1080/03019233.2019.168017610.1080/03019233.2019.1680176 ↗
18. G. Mahalle, A. Morchhale, N. Kotkunde, A.K. Gupta, S.K. Singh, and Y.C. Lin, Forming and Fracture Limits of IN718 Alloy at Elevated Temperatures: Experimental and Theoretical Investigation, J. Manuf. Process., 2020, 56, p 482–499. https://doi.org/10.1016/j.jmapro.2020.04.07010.1016/j.jmapro.2020.04.070 ↗
19. İ. Karaağaç, T. Önel, and O. Uluer, The Effects of Local Heating on Springback Behaviour in v Bending of Galvanized DP600 Sheet, Ironmak. Steelmak., 2019, 1, p 1–7. https://doi.org/10.1080/03019233.2019.161530810.1080/03019233.2019.1615308 ↗
20. S. Pandre, A. Morchhale, N. Kotkunde, and S.K. Singh, Influence of Processing Temperature on Formability of Thin-Rolled DP590 Steel Sheet, Mater. Manuf. Process., 2020, https://doi.org/10.1080/10426914.2020.174385410.1080/10426914.2020.1743854 ↗
21. M. Hajian and A. Assempour, Experimental and Numerical Determination of Forming Limit Diagram for 1010 Steel Sheet: A Crystal Plasticity Approach, Int. J. Adv. Manuf. Technol., 2015, 76(9–12), p 1757–1767. https://doi.org/10.1007/s00170-014-6339-910.1007/s00170-014-6339-9 ↗
22. Y.C. Lin, X.-H. Zhu, W.-Y. Dong, H. Yang, Y.-W. Xiao, and N. Kotkunde, Effects of Deformation Parameters and Stress Triaxiality on the Fracture Behaviors and Microstructural Evolution of an Al-Zn-Mg-Cu Alloy, J. Alloy. Compd., 2020, 832, p 154988. https://doi.org/10.1016/j.jallcom.2020.15498810.1016/j.jallcom.2020.154988 ↗
23. S.M. Hussaini, G. Krishna, A.K. Gupta, and S.K. Singh, Development of Experimental and Theoretical Forming Limit Diagrams for Warm Forming of Austenitic Stainless Steel 316, J. Manuf. Process., 2015, 18, p 151–158. https://doi.org/10.1016/j.jmapro.2015.03.00510.1016/j.jmapro.2015.03.005 ↗
24. Z. Marciniak and K. Kuczyński, Limit Strains in the Processes of Stretch-Forming Sheet Metal, Int. J. Mech. Sci., 1967, 9(9), p 609–620. https://doi.org/10.1016/0020-7403(67)90066-510.1016/0020-7403(67)90066-5 ↗
25. V. Talyan, R.H. Wagoner, and J.K. Lee, Formability of Stainless Steel, Metall. Mater. Trans. A, 1998, 29(8), p 2161–2172. https://doi.org/10.1007/s11661-998-0041-110.1007/s11661-998-0041-1 ↗
26. K.V. Jata, A.K. Hopkins, and R.J. Rioja, The Anisotropy and Texture of Al-Li Alloys, MSF, 1996, 217–222, p 647–652. https://doi.org/10.4028/www.scientific.net/MSF.217-222.64710.4028/www.scientific.net/MSF.217-222.647 ↗
27. J.C. Osorio-Pinzon, S. Abolghasem, and J.P. Casas-Rodriguez, Predicting the Johnson Cook Constitutive Model Constants Using Temperature Rise Distribution in Plane Strain Machining, Int. J. Adv. Manuf. Technol., 2019, 105(1), p 279–294. https://doi.org/10.1007/s00170-019-04225-910.1007/s00170-019-04225-9 ↗
28. G.R. Johnson and W.H. Cook, Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures, Eng. Fract. Mech., 1985, 21(1), p 31–48. https://doi.org/10.1016/0013-7944(85)90052-910.1016/0013-7944(85)90052-9 ↗
29. N. Kotkunde, A.D. Deole, A.K. Gupta, and S.K. Singh, Comparative Study of Constitutive Modeling for Ti–6Al–4 V Alloy at Low Strain Rates and Elevated Temperatures, Mater. Des., 2014, 55, p 999–1005. https://doi.org/10.1016/j.matdes.2013.10.08910.1016/j.matdes.2013.10.089 ↗
30. D. Samantaray, S. Mandal, U. Borah, A.K. Bhaduri, and P.V. Sivaprasad, A Thermo-Viscoplastic Constitutive Model to Predict Elevated-Temperature Flow Behaviour in a Titanium-Modified Austenitic Stainless Steel, Mater. Sci. Eng. A, 2009, 526(1), p 1–6. https://doi.org/10.1016/j.msea.2009.08.00910.1016/j.msea.2009.08.009 ↗
31. D. Samantaray, S. Mandal, C. Phaniraj, and A.K. Bhaduri, Flow Behavior and Microstructural Evolution during Hot Deformation of AISI, Type 316 L(N) Austenitic Stainless Steel, Mater. Sci. Eng. A, 2011, 528(29), p 8565–8572. https://doi.org/10.1016/j.msea.2011.08.01210.1016/j.msea.2011.08.012 ↗
32. Y.C. Lin, X.-M. Chen, and G. Liu, A Modified Johnson-Cook Model for Tensile Behaviors of Typical High-Strength Alloy Steel, Mater. Sci. Eng. A, 2010, 527(26), p 6980–6986. https://doi.org/10.1016/j.msea.2010.07.06110.1016/j.msea.2010.07.061 ↗
33. D. Banabic, Sheet Metal Forming Processes: Constitutive Modelling and Numerical Simulation, Springer, Berlin, 201010.1007/978-3-540-88113-1 ↗
34. R. Hill, Constitutive Modelling of Orthotropic Plasticity in Sheet Metals, J. Mech. Phys. Solids, 1990, 38(3), p 405–417. https://doi.org/10.1016/0022-5096(90)90006-P10.1016/0022-5096(90)90006-P ↗
35. S. Pandre, P. Takalkar, A. Morchhale, N. Kotkunde, and S.K. Singh, Prediction Capability of Anisotropic Yielding Behaviour for DP590 Steel at Elevated Temperatures, Adv. Mater. Process. Technol., 2020, 6(2), p 476–484. https://doi.org/10.1080/2374068X.2020.172864710.1080/2374068X.2020.1728647 ↗
36. F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.-H. Choi, and E. Chu, Plane Stress Yield Function for Aluminum Alloy Sheets—Part 1: Theory, Int. J. Plast., 2003, 19(9), p 1297–1319. https://doi.org/10.1016/S0749-6419(02)00019-010.1016/S0749-6419(02)00019-0 ↗
37. K.S. Prasad, S.K. Panda, S.K. Kar, S.V.S. Narayana Murty, and S.C. Sharma, Effect of Bending Strain in Forming Limit Strain and Stress of IN-718 Sheet Metal, Mater. Sci. For., 2015, 1, p 238–241. https://doi.org/10.4028/www.scientific.net/MSF.830-831.23810.4028/www.scientific.net/MSF.830-831.238 ↗
38. S. Panich, F. Barlat, V. Uthaisangsuk, S. Suranuntchai, and S. Jirathearanat, Experimental and Theoretical Formability Analysis Using Strain and Stress Based Forming Limit Diagram for Advanced High Strength Steels, Mater. Des., 2013, 51, p 756–766. https://doi.org/10.1016/j.matdes.2013.04.08010.1016/j.matdes.2013.04.080 ↗
39. N. Kotkunde, H.N. Krishnamurthy, S.K. Singh, and G. Jella, Experimental and Numerical Investigations on Hot Deformation Behavior and Processing Maps for ASS 304 and ASS 316, High Temp. Mater. Processes (London), 2018, 37, p 873–888. https://doi.org/10.1515/htmp-2017-004710.1515/htmp-2017-0047 ↗