Microstructures and Properties of Nanostructured TiN/MoS2/Ag Composite Film Prepared by Pulsed Laser Deposition
Source abstract
Abstract
In this work, the structural and mechanical properties, tribological performance, and lubrication mechanism from room temperature to 900 °C of TiN/MoS2/Ag composite films were investigated in detail. Nanostructured TiN/MoS2/Ag composite film was obtained by assembling targets using pulsed laser deposition. The incorporation of lubricant layered MoS2 and soft metal Ag led to degraded mechanical properties, which could contribute to the lower friction coefficients at low temperatures. When the temperature increased to above 500 °C, the generated high-temperature lubricant MoO3 and silver molybdates played a critical synergetic lubrication effect, which formed a layer of lubricating film and reduced the friction coefficient. Thus, the cooperation of various lubrication phases contributed to improvement of tribological performance and resulted in continuous lubrication from room temperature to 900 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. R. Franz and C. Mitterer, Vanadium Containing Self-Adaptive Low-Friction Hard Coatings for High-Temperature Applications: A Review, Surf. Coat. Technol., 2013, 228, p 1–1310.1016/j.surfcoat.2013.04.034 ↗
2. T.W. Scharf and S.V. Prasad, Solid Lubricants: A Review, J. Mater. Sci., 2012, 48(2), p 511–53110.1007/s10853-012-7038-2 ↗
3. C. Muratore and A.A. Voevodin, Molybdenum Disulfide as a Lubricant and Catalyst in Adaptive Nanocomposite Coatings, Surf. Coat. Technol., 2006, 201(7), p 4125–413010.1016/j.surfcoat.2006.08.014 ↗
4. X. Dangsheng, Lubrication Behavior of Ni-Cr-Based Alloys Containing MoS2 at High Temperature, Wear, 2001, 251, p 1094–109910.1016/S0043-1648(01)00803-1 ↗
5. L. Kong, Q. Bi, M. Niu, S. Zhu, J. Yang, and W. Liu, ZrO2 (Y2O3)-MoS2-CaF2 Self-Lubricating Composite Coupled with Different Ceramics from 20 °C to 1000 °C, Tribol. Int., 2013, 64, p 53–6210.1016/j.triboint.2013.02.027 ↗
6. J.H.N.M. Renevier, V.C. Fox, J. Witts, T. Allen, and D.G. Teer, Advantages of Using Self-Lubricating, Hard, Wear-Resistant MoS2-Based Coatings, Surf. Coat. Technol., 2001, 142–144, p 67–7710.1016/S0257-8972(01)01108-2 ↗
7. X. Shi, Z. Xu, M. Wang, W. Zhai, J. Yao, S. Song, A. Qamar ud Din, and Q. Zhang, Tribological Behavior of TiAl Matrix Self-Lubricating Composites Containing Silver from 25 to 800 °C, Wear, 2013, 303(1–2), p 486–49410.1016/j.wear.2013.04.009 ↗
8. W. Duan, Y. Sun, C. Liu, S. Liu, Y. Li, C. Ding, G. Ran, and L. Yu, Study on the formation Mechanism of the Glaze Film Formed on Ni/Ag Composites, Tribol. Int., 2016, 95, p 324–33210.1016/j.triboint.2015.11.031 ↗
9. H.-H. Chien, K.-J. Ma, S.P. Vattikuti, C.-H. Kuo, C.-B. Huo, and C.-L. Chao, Tribological Behaviour of MoS2/Au Coatings, Thin Solid Films, 2010, 518(24), p 7532–753410.1016/j.tsf.2010.05.040 ↗
10. J. Li, D. Xiong, Z. Huang, J. Kong, and J. Dai, Effect of Ag and CeO2 on Friction and Wear Properties of Ni-Base Composite at High Temperature, Wear, 2009, 267(1–4), p 576–58410.1016/j.wear.2008.12.050 ↗
11. C. Muratore, A.A. Voevodin, J.J. Hu, J.G. Jones, and J.S. Zabinski, Growth and Characterization of Nanocomposite Yttria-Stabilized Zirconia with Ag and Mo, Surf. Coat. Technol., 2005, 200(5–6), p 1549–155410.1016/j.surfcoat.2005.08.032 ↗
12. J. Chen, X. Zhao, H. Zhou, J. Chen, Y. An, and F. Yan, Microstructure and Tribological Property of HVOF-sprayed adaptive NiMoAl-Cr3C2-Ag composite coating from 20 °C to 800 °C, Surf. Coat. Technol., 2014, 258, p 1183–119010.1016/j.surfcoat.2014.07.012 ↗
13. U.P. LeClair, G.P. Berera, and J.S. Moodera, Titanium nitride Thin Films Obtained by a Modified Physical Vapor Deposition Process, Thin Solid Films, 2000, 376, p 9–1510.1016/S0040-6090(00)01192-5 ↗
14. S. Zhang and X. Zhang, Toughness Evaluation of Hard Coatings and Thin Films, Thin Solid Films, 2012, 520(7), p 2375–238910.1016/j.tsf.2011.09.036 ↗
15. E. Santecchia, A.M.S. Hamouda, F. Musharavati, E. Zalnezhad, M. Cabibbo, and S. Spigarelli, Wear Resistance Investigation of Titanium Nitride-Based Coatings, Ceram. Int., 2015, 41(9), p 10349–1037910.1016/j.ceramint.2015.04.152 ↗
16. M. Popović, M. Novaković, A. Traverse, K. Zhang, N. Bibić, H. Hofsäss, and K.P. Lieb, Modifications of Reactively Sputtered Titanium Nitride Films by Argon and Vanadium Ion Implantation: Microstructural and Opto-Electric Properties, Thin Solid Films, 2013, 531, p 189–19610.1016/j.tsf.2013.01.045 ↗
17. N. Fateh, G.A. Fontalvo, G. Gassner, and C. Mitterer, Influence of High-Temperature Oxide Formation on the Tribological Behaviour of TiN and VN Coatings, Wear, 2007, 262(9–10), p 1152–115810.1016/j.wear.2006.11.006 ↗
18. G.J.W.N. Huang, Y. Leng, Y.X. Leng, H. Sun, P. Yang, J.Y. Chen, J. Wang, and P.K. Chu, Deformation Behavior of titanium Nitride Film Prepared by Plasma Immersion Ion Implantation and Deposition, Surf. Coat. Technol., 2002, 156, p 170–17510.1016/S0257-8972(02)00124-X ↗
19. H. Guo, W. Chen, Y. Shan, W. Wang, Z. Zhang, and J. Jia, Microstructures and Properties of Titanium Nitride Films Prepared by Pulsed Laser Deposition at Different Substrate Temperatures, Appl. Surf. Sci., 2015, 357, p 473–47810.1016/j.apsusc.2015.09.061 ↗
20. P. Basnyat, B. Luster, Z. Kertzman, S. Stadler, P. Kohli, S. Aouadi, J. Xu, S.R. Mishra, O.L. Eryilmaz, and A. Erdemir, Mechanical and Tribological Properties of CrAlN-Ag Self-Lubricating Films, Surf. Coat. Technol., 2007, 202(4–7), p 1011–101610.1016/j.surfcoat.2007.05.088 ↗
21. S.M. Aouadi, H. Gao, A. Martini, T.W. Scharf, and C. Muratore, Lubricious Oxide Coatings for Extreme Temperature Applications: A Review, Surf. Coat. Technol., 2014, 257, p 266–27710.1016/j.surfcoat.2014.05.064 ↗
22. J.J. Hu, C. Muratore, and A.A. Voevodin, Silver Diffusion and High-Temperature Lubrication Mechanisms of YSZ-Ag-Mo Based Nanocomposite Coatings, Compos. Sci. Technol., 2007, 67(3–4), p 336–34710.1016/j.compscitech.2006.09.008 ↗
23. D.V. Shtansky, A.V. Bondarev, P.V. Kiryukhantsev-Korneev, T.C. Rojas, V. Godinho, and A. Fernández, Structure and Tribological Properties of MoCN-Ag Coatings in the Temperature Range of 25–700 °C, Appl. Surf. Sci., 2013, 273, p 408–41410.1016/j.apsusc.2013.02.055 ↗
24. J. Chen, Y. An, J. Yang, X. Zhao, F. Yan, H. Zhou, and J. Chen, Tribological Properties of Adaptive NiCrAlY-Ag-Mo Coatings Prepared by Atmospheric Plasma Spraying, Surf. Coat. Technol., 2013, 235, p 521–52810.1016/j.surfcoat.2013.08.012 ↗
25. H. Guo, B. Li, J. Wang, W. Chen, Z. Zhang, W. Wang, and J. Jia, Microstructures, Mechanical and Tribological Properties of VN Films Deposited by PLD Technique, RSC Adv., 2016, 6(40), p 33403–3340810.1039/C6RA02403C ↗
26. W.C. Oliver, An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments, J. Mater. Res., 1992, 7, p 1564–158310.1557/JMR.1992.1564 ↗
27. H. Köstenbauer, G.A. Fontalvo, C. Mitterer, and J. Keckes, Tribological Properties of TiN/Ag Nanocomposite Coatings, Tribol. Lett., 2008, 30(1), p 53–6010.1007/s11249-008-9312-7 ↗
28. G. Strapasson, P.C. Badin, G.V. Soares, G. Machado, C.A. Figueroa, R. Hubler, A.L. Gasparin, I.J.R. Baumvol, C. Aguzzoli, and E.K. Tentardini, Structure, Composition, and Mechanical Characterization of dc Sputtered TiN-MoS2 Nanocomposite Thin Films, Surf. Coat. Technol., 2011, 205(13–14), p 3810–381510.1016/j.surfcoat.2011.01.044 ↗
29. M.A.B.R. Gilmore, P.N. Gibson, W. Gissler, and M. Stoiber, Low-Friction TiN-MoS2 Coatings Produced by dc Magnetron Co-Deposition, Surf. Coat. Technol., 1998, 108–109, p 245–351
30. X. Li, J. Li, K. Wang, X. Wang, S. Wang, X. Chu, M. Xu, X. Fang, Z. Wei, Y. Zhai, and B. Zou, Pressure and Temperature-Dependent Raman Spectra of MoS2 Film, Appl. Phys. Lett., 2016, 109(24), p 24210110.1063/1.4968534 ↗
31. N. Ravi Chandra Raju and K. Jagadeesh Kumar, Photodissociation Effects on Pulsed Laser Deposited Silver Oxide Thin Films: Surface-Enhanced Resonance Raman Scattering, J. Raman Spectrosc., 2011, 42(7), p 1505–150910.1002/jrs.2895 ↗
32. R.C.K. Jagannadham, N. Biunno, and J. Narayan, Raman Spectroscopy of Tin Films Deposited on Silicon (001) Substrate by Laser Physical Vapor Deposition, Mater. Res. Soc., 1994, 317, p 193–19810.1557/PROC-317-193 ↗
33. W. Gulbiński and T. Suszko, Thin Films of MoO3-Ag2O Binary Oxides—The High Temperature Lubricants, Wear, 2006, 261(7–8), p 867–87310.1016/j.wear.2006.01.008 ↗
34. J.-Y. Wang, Y. Shan, H. Guo, B. Li, W. Wang, and J. Jia, Friction and Wear Characteristics of Hot-Pressed NiCr–Mo/MoO3/Ag Self-Lubrication Composites at Elevated Temperatures up to 900 °C, Tribol. Lett., 2015, 59(3), p 48–6410.1007/s11249-015-0574-6 ↗
35. S.M. Aouadi, Y. Paudel, B. Luster, S. Stadler, P. Kohli, C. Muratore, C. Hager, and A.A. Voevodin, Adaptive Mo2N/MoS2/Ag Tribological Nanocomposite Coatings for Aerospace Applications, Tribol. Lett., 2007, 29(2), p 95–10310.1007/s11249-007-9286-x ↗