Miedema Model and Srikanth Equation for Predicting the Effect of Microalloying Element on the Microstructure of Cu-Ni-Sn Alloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgy and Material Science · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. J.K. Xiao, W. Zhang, L.M. Liu, X.P. Gan, K.C. Zhou, and C. Zhang, Microstructure and Tribological Properties of Plasma Sprayed Cu-15Ni-8Sn Coatings, Surf. Coat. Technol., 2018, 337, p 159–167. https://doi.org/10.1016/j.surfcoat.2018.01.01610.1016/j.surfcoat.2018.01.016 ↗
2. J.J. Cheng, X.P. Gan, Z. Li, Q. Lei, and K.C. Zhou, Wear Map for Sliding Wear Behavior of Cu-15Ni-8Sn Alloy Against Bearing Steel Under Oil-Lubricated Condition, J. Cent. South Univ., 2020, 27, p 311–324. https://doi.org/10.1007/s11771-020-4297-y10.1007/s11771-020-4297-y ↗
3. C.J. Guo, J.S. Chen, H. Wang, X.P. Xiao, H. Huang, and B. Yang, Effect of P Addition on Dry Sliding Wear Properties of Cu-15Ni-8Sn Alloy, Chin. J. Nonferrous Met., 2021, 31, p 1156–1167. https://doi.org/10.11817/j.ysxb.10040609.2021-39794. (in Chinese)10.11817/j.ysxb.10040609.2021-39794 ↗
4. S. Ilangovan, R.V. Vignesh, R. Padmanaban, and J. Gokulachandran, Effect of Composition and Aging Time on Hardness and Wear Behavior of Cu-Ni-Sn Spinodal Alloy, J. Cent. South Univ., 2019, 26, p 2634–2642. https://doi.org/10.1007/s11771-019-4200-x10.1007/s11771-019-4200-x ↗
5. G.M. Zhang, C. Chen, X.J. Wang, P.W. Wang, X.Y. Zhang, X.P. Gan, and K.C. Zhou, Additive Manufacturing of Fine-Structured Copper Alloy by Selective Laser Melting of Pre-Alloyed Cu-15Ni-8Sn Powder, Int. J. Adv. Manuf. Technol., 2018, 96, p 4223–4230. https://doi.org/10.1007/s00170-018-1891-310.1007/s00170-018-1891-3 ↗
6. J.K. Li, Z.W. Zhang, W.H. Xu, Y.Q. Yang, P.J. Xue, Q. Teng, C. Cai, W. Li, and Q.S. Wei, Hot Isostatic Pressing of Cu-15Ni-8Sn Alloy with Suppressed Sn Macro-Segregation and Enhanced Mechanical Properties, Mater. Sci. Eng. A, 2022, 855, 143866. https://doi.org/10.1016/j.msea.2022.14386610.1016/j.msea.2022.143866 ↗
7. J.C. Zhao and M.R. Notis, Spinodal Decomposition, Ordering Transformation, and Discontinuous Precipitation in a Cu–15Ni–8Sn Alloy, Acta Mater., 1998, 46, p 4203–4218. https://doi.org/10.1016/s1359-6454(98)00095-010.1016/s1359-6454(98)00095-0 ↗
8. C.J. Guo, Y.F. Shi, X.P. Xiao, S.M. You, G.H. An, Y.H. Gong, and B. Yang, Enhanced Softening Resistance and Mechanical Properties of Cu-Ni-Sn Alloy with Al, Zn and Si Micro-Alloying, J. Alloys Compd., 2022, 923, p 166410. https://doi.org/10.1016/j.jallcom.2022.16641010.1016/j.jallcom.2022.166410 ↗
9. S.Y. Xu, Y.L. Li, M.X. Zhang, T. Song, H. Ding, and S.Y. Jing, Improvingstrength and Elongation Combination of Cu-9Ni-6Sn-(0.2Nb) Alloys by Pre-Annealing and Aging Treatment, Mater. Sci. Eng. A, 2022, 860, 144221. https://doi.org/10.1016/jmsea.2022.14422110.1016/jmsea.2022.144221 ↗
10. S.Y. Xu, Y.L. Li, M.X. Zhang, T. Song, and H. Ding, The Effects of Nb Additions on the Microstructure Evolution in Cu-9Ni-6Sn Alloy, Intermetallics, 2022, 143, 107497. https://doi.org/10.1016/j.intermet.2022.10749710.1016/j.intermet.2022.107497 ↗
11. Q.X. Yu, X.N. Li, K.R. Wei, Z.M. Li, Y.H. Zheng, N.J. Li, X.T. Cheng, C.Y. Wang, Q. Wang, and C. Dong, Cu-Ni-Sn-Si Alloys Designed by Cluster-Plus-Glue-Atom Model, Mater. Des., 2019, 167, 107641. https://doi.org/10.1016/j.matdes.2019.10764110.1016/j.matdes.2019.107641 ↗
12. C. Zhao, Z. Wang, D.Q. Pan, D.X. Li, Z.Q. Luo, D.T. Zhang, C. Yang, and W.W. Zhang, Effect of Si and Ti on Dynamic Recrystallization of High-Performance Cu-15Ni-8Sn Alloy During Hot Deformation, Trans. Nonferrous Met. Soc. China, 2019, 29, p 2556–2565. https://doi.org/10.1016/s1003-6326(19)65163-010.1016/s1003-6326(19)65163-0 ↗
13. C. Zhao, W.W. Zhang, Z. Wang, D.X. Li, Z.Q. Luo, C. Yang, and D.T. Zhang, Improving the Mechanical Properties of Cu-15Ni-8Sn Alloys by Addition of Titanium, Materials, 2017, 10, p 1038. https://doi.org/10.3390/ma1009103810.3390/ma10091038 ↗
14. K.V. Shankar, P. Cherian, and R. Sellamuthu, Development of Cu-6Sn-5Ni-xTi and to Analyse their Mechanical and Wear Properties in As-Cast Condition, Int. J. Microstruct. Mater. Prop., 2017, 12, p 94–103. https://doi.org/10.1504/IJMMP2017.08768710.1504/IJMMP2017.087687 ↗
15. Z.K. Guo, J.C. Jie, S.C. Liu, J.M. Liu, S.P. Yue, Y.B. Zhang, and T.J. Li, Suppression of Discontinuous Precipitation in Age-Hardening Cu-15Ni-8Sn Alloy by Addition of V, J. Alloys Compd., 2020, 813, 152229. https://doi.org/10.1016/jjallcom.2019.15222910.1016/jjallcom.2019.152229 ↗
16. Z.K. Guo, J.C. Jie, S.C. Liu, Y.B. Zhang, B.L. Qin, T.M. Wang, and T.J. Li, Effect of V Addition on Microstructures and Mechanical Properties of Cu-15Ni-8Sn Alloy, Mater. Sci. Eng. A, 2019, 748, p 85–94. https://doi.org/10.1016/j.msea.2019.01.08410.1016/j.msea.2019.01.084 ↗
17. J.J. Cheng, Y. Gao, Z.Y. Zhang, X.P. Gan, Q. Lei, and X.J. Wu, Effect of Yttrium on the Cellular Precipitation Kinetics, Grain Growth Behavior and Mechanical Properties of High Strength Cu-15Ni-8Sn Alloy, J. Alloys Compd., 2022, 918, 165408. https://doi.org/10.1016/j.jallcom.2022.16540810.1016/j.jallcom.2022.165408 ↗
18. C.J. Guo, J. Wan, J.S. Chen, X.P. Xiao, H. Huang, J.P. Liu, and B. Yang, Inhibition of Discontinuous Precipitation and Enhanced Properties of Cu-15Ni-8Sn Alloy with Fe Addition, Mater. Sci. Eng. A, 2020, 795, 139917. https://doi.org/10.1016/j.msea.2020.13991710.1016/j.msea.2020.139917 ↗
19. D.H. Yang, Y.K. Kim, S.H. Park, and K.A. Lee, Improved Mechanical and Thermophysical Properties of Additively Manufactured Cu-Ni-Sn-P alloy by using Aging Treatment, J. Alloys Compd., 2021, 875, 160050. https://doi.org/10.1016/jjallcom.2021.16005010.1016/jjallcom.2021.160050 ↗
20. C.J. Guo, Y.F. Shi, J.S. Chen, X.P. Xiao, B.X. Liu, J.P. Liu, and B. Yang, Effects of P Addition on Spinodal Decomposition and Discontinuous Precipitation in Cu-15Ni-8Sn Alloy, Mater Charact, 2021, 171, 110760. https://doi.org/10.1016/jmatchar.2020.11076010.1016/jmatchar.2020.110760 ↗
21. J.J. Zhang, Z.Y. Liu, Z.K. Guo, S.C. Liu, Y. Dong, Y. Fu, J.C. Jie, and D.L. Zhang, Effects of Zr on Microstructural Evolution and Mechanical Property of Cu-15Ni-8Sn Alloy, Mater. Sci. Eng. A, 2022, 831, 142287. https://doi.org/10.1016/j.msea.202114228710.1016/j.msea.2021142287 ↗
22. N.J. Li, X.N. Li, Z.M. Li, Q.X. Yu, Y.H. Zheng, Y.L. Hu, Q. Wang, C. Dong, Y.X. Jiang, and X.W. Zhang, Differential Effects of Zn and Co Solutes on the Properties of Cu-Ni-Sn Alloys, Intermetallics, 2020, 125, 106894. https://doi.org/10.1016/jintermet.2020.10689410.1016/jintermet.2020.106894 ↗
23. M.Q. Yuan, K. Tang, C.J. Guo, J.S. Chen, Y.F. Shi, and B. Yang, Effect of Cr Addition on the Microstructure and Properties of Cu-15Ni-8Sn Alloy, Mater. Today Commun., 2025, 44, 111874. https://doi.org/10.1016/j.mtcomm.2025.11187410.1016/j.mtcomm.2025.111874 ↗
24. K. Zhang, L.M. Zhang, C.L. Shu, W.X. Fan, S. Li, X. Yuan, J.S. Zhao, Y.S. Wang, and P.F. Wang, Effect of Different Mo Addition on Microstructure and Mechanical Properties of Cu-15Ni-8Sn Alloy, Materials, 2022, 15, 5521. https://doi.org/10.3390/ma1516552110.3390/ma15165521 ↗
25. C.J. Guo, J.S. Chen, X.P. Xiao, H. Huang, W.J. Wang, and B. Yang, The Effect of Co Addition on the Modulated Structure Coarsening and Discontinuous Precipitation Growth Kinetics of Cu-15Ni-8Sn Alloy, J. Alloys Compd., 2020, 835, 155275. https://doi.org/10.1016/j.jallcom.2020.15527510.1016/j.jallcom.2020.155275 ↗
26. C.J. Guo, Z.M. Qi, H.B. Xu, Y.F. Shi, X.P. Xiao, G.H. An, and B. Yang, Comparison of Discontinuous Precipitation Behavior of Cu-15Ni-8Sn Alloy with and Without Co Addition, J. Alloys Compd., 2023, 930, 167448. https://doi.org/10.1016/j.jallcom.2022.16744810.1016/j.jallcom.2022.167448 ↗
27. M.F. Stavish and A.M. Reti, Rhenium-bearing copper-nickel-tin alloys, U.S. Patent 4,388,270, 14 Jun 1983. https://patents.justia.com/patent/4388270
28. J.T. Plewes, Method for producing copper based spinodal alloys, U.S. Patent 4,260,432, 7 Apr 1981. https://patents.justia.com/patent/4260432
29. W.S. Jeon, C.C. Shur, J.G. Kim, S.Z. Han, and Y.S. Kim, Effect of Cr on the Corrosion Resistance of Cu-6Ni-4Sn Alloys, J. Alloys Compd., 2008, 455, p 358–363. https://doi.org/10.1016/j.jallcom.2007.01.13910.1016/j.jallcom.2007.01.139 ↗
30. Y.H. Gong, C.J. Guo, Y.F. Shi, J.H. Zhang, X. Liang, X.P. Xiao, J.S. Chen, and B. Yang, Effect of Rare Earth Er on Discontinuous Precipitation and Mechanical Properties of Cu-15Ni-8Sn-0.3Fe Alloy, Mater Charact, 2023, 205, 113293. https://doi.org/10.1016/j.matchar.2023.11329310.1016/j.matchar.2023.113293 ↗
31. J.J. Cheng, M.C. Mao, X.P. Gan, Q. Lei, Z. Li, and K.C. Zhou, Microstructures, Mechanical Properties, and Grease-Lubricated Sliding Wear Behavior of Cu-15Ni-8Sn-0.8Nb Alloy with High Strength and Toughness, Friction, 2021, 9, p 1061–1076. https://doi.org/10.1007/s40544-020-0399-710.1007/s40544-020-0399-7 ↗
32. X.K. Chen, E.M. Zhang, D. Wu, and K.Q. Chen, Strain-Induced Medium-Temperature Thermoelectric Performance of Cu4TiSe4: the Role of Four-Phonon Scattering, Phys. Rev. Appl., 2023, 19, 044052. https://doi.org/10.1103/PhysRevApplied.19.04405210.1103/PhysRevApplied.19.044052 ↗
33. X.L. Zou and H. Yan, Thermodynamic and Kinetic Analysis of Ternary Intermetallics Formation in Al-Cu-La Alloy, Physica B, 2022, 646, 414254. https://doi.org/10.1016/j.physb.2022.41425410.1016/j.physb.2022.414254 ↗
34. F.D. Chen, H.T. Jiang, Y. Zhang, S.W. Tian, Y.G. Yang, R.J. Zhang, H.Q. Zhong, and X.Y. Tang, First-Principles Calculation of Bonding and Hydrogen Trapping Mechanism of Fe3C/α-Fe Interface, J. Mater. Res. Technol., 2023, 26, p 6782–6793. https://doi.org/10.1016/j.jmrt.2023.09.07410.1016/j.jmrt.2023.09.074 ↗
35. J. Wang, N. Lu, and C.H. Zhang, Study of High Temperature Mechanical Properties and Irradiation Behavior of Zr3Al alloy by Chen’s Lattice Inversion EAM, Mater. Today Commun., 2024, 38, 107664. https://doi.org/10.1016/j.mtcomm.2023.10766410.1016/j.mtcomm.2023.107664 ↗
36. V. Rigaud, B. Sundman, D. Dominique, and G. Lesoult, Thermodynamic Assessment of the Fe-Al-Zr Phase Diagram, Calphad: Comput. Coupling Phase Diagr. Thermochem., 2009, 33, p 442–449. https://doi.org/10.1016/j.calphad2009.05.00310.1016/j.calphad2009.05.003 ↗
37. F.J.C.P. Plata, J.N.R. Olvera, V.G. Febles, and L.G.D. Barriga, Thermodynamic Analysis and Microstructural Evolution of the W-Mo-Ni-C System Produced by Mechanical Alloying, Physica B, 2022, 644, 414126. https://doi.org/10.1016/jphysb.2022.41412610.1016/jphysb.2022.414126 ↗
38. C. Li, Y. Yuan, F. Li, Q. Wei, and Y. Huang, Modification and Verification of Miedema Model for Predicating Thermodynamic Properties of Binary Precipitates in Multi-Element Alloys, Physica B, 2022, 627, 413540. https://doi.org/10.1016/jphysb.2021.41354010.1016/jphysb.2021.413540 ↗
39. R.F. Zhang, S.H. Zhang, Z.J. He, J. Jing, and S.H. Sheng, Miedema Calculator: A Thermodynamic Platform for Predicting Formation Enthalpies of Alloys within Framework of Miedema’s Theory, Comput. Phys. Commun., 2016, 209, p 58–69. https://doi.org/10.1016/j.cpc.2016.08.01310.1016/j.cpc.2016.08.013 ↗
40. A.R. Miedema and F.R.D. Boer, Cohesion in Alloys-Fundamentals of a Semi-Empirical Model, Physica B+C, 1980, 100, p 1–28. https://doi.org/10.1016/0378-4363(80)90054-610.1016/0378-4363(80)90054-6 ↗
41. S.P. Sun, D.Q. Yi, H.Q. Liu, B. Zang, and Y. Jiang, Calculation of Glass Forming Ranges in Al-Ni-RE (Ce, La, Y) Ternary Alloys and their Sub-Binaries based on Miedema’s Model, J. Alloys Compd., 2010, 506, p 377–387. https://doi.org/10.1016/j.jallcom.2010.07.01110.1016/j.jallcom.2010.07.011 ↗
42. L.L. Jin, D. Kevorkov, M. Medraj, and P. Chartrand, Al-Mg-RE (RE=La, Ce, Pr, Nd, Sm) Systems: Thermodynamic Evaluations and Optimizations Coupled with Key Experiments and Miedema’s Model Estimations, J. Chem. Thermodyn., 2013, 58, p 166–195. https://doi.org/10.1016/j.jct.2012.10.02110.1016/j.jct.2012.10.021 ↗
43. Y.F. Ouyang, X.P. Zhong, Y. Du, Z.P. Jin, Y.H. He, and Z.H. Yuan, Formation Enthalpies of Fe-Al-RE Ternary Alloys Calculated with a Geometric Model and Miedema’s Theory, J. Alloys Compd., 2006, 416, p 148–154. https://doi.org/10.1016/j.jallcom.2005.08.05510.1016/j.jallcom.2005.08.055 ↗
44. Y.F. Ouyang, X.P. Zhong, Y. Du, Y.P. Feng, and Y.H. He, Enthalpies of Formation for the Al-Cu-Ni-Zr Quaternary Alloys Calculated via a Combined Approach of Geometric Model and Miedema Theory, J. Alloys Compd., 2006, 420, p 175–181. https://doi.org/10.1016/j.jallcom.2005.10.04710.1016/j.jallcom.2005.10.047 ↗
45. K.C. Chou and S.K. Wei, A New Generation Solution Model for Predicting Thermodynamic Properties of a Multicomponent System from Binaries, Metall. Mater. Trans. B, 1997, 28, p 439–445. https://doi.org/10.1007/s11663-997-0110-710.1007/s11663-997-0110-7 ↗
46. K.C. Chou, A General Solution Model for Predicting Ternary Thermodynamic Properties, Calphad, 1995, 19, p 315–325. https://doi.org/10.1016/0364-5916(95)00029-E10.1016/0364-5916(95)00029-E ↗
47. X.B. Gao, S.B. Wang, Z.G. Yang, and J. Su, Calculation of Sc Activity in Ternary Alloy Al-2%Si-xSc based on Miedema Model, J. Inn. Mong. Univ. Technol., 2019, 38, p 257–260. https://doi.org/10.13785/j.cnki.nmggydxxbzrkxb.2019.04.00110.13785/j.cnki.nmggydxxbzrkxb.2019.04.001 ↗
48. T.X. Fan, G. Yang, and D. Zhang, Thermodynamic Effect of Alloying Addition on In-situ Reinforced TiB2/Al Composites, Metall. Mater. Trans. A, 2005, 36, p 225–233. https://doi.org/10.1007/s11661-005-0154-810.1007/s11661-005-0154-8 ↗
49. P.L. Jackson and R.A. Wilsak, Thermodynamic Consistency Tests Based on the Gibbs-Duhem Equation Applied to Isothermal, Binary Vapor-Liquid Equilibrium Data: Data Evaluation and Model Testing, Fluid Phase Equilib., 1995, 103, p 155–197. https://doi.org/10.1016/0378-3812(94)02581-K10.1016/0378-3812(94)02581-K ↗
50. S. Srikanth and K.T. Jacob, Thermodynamic Consistency of the Interaction Parameter Formalism, Metall. Mater. Trans. B, 1988, 19, p 269–275. https://doi.org/10.1007/BF0265421210.1007/BF02654212 ↗
51. W.H. Yang, Y.J. Zhou, R. Yang, S.D. Yang, F. Zhou, K.X. Song, J. Feng, H. Jiang, X.B. Zhang, and J. Du, Effect Mechanism of Nb Addition on Grain Refinement and Inhibition of Discontinuous Precipitation of Cu-15Ni-8Sn Alloy, J. Mater. Res. Technol., 2024, 32, p 3966–3979. https://doi.org/10.1016/j.jmrt.2024.08.20910.1016/j.jmrt.2024.08.209 ↗
52. S.F. Xie, C. Zhao, H.K. Dong, R. Zhong, D.X. Li, Y.B. Ke, and W.W. Zhang, Effect of Si Addition on the Microstructure Evolution of Cast Cu-15Ni-8Sn Alloys during Solidification, J. Alloys Compd., 2025, 1040, 183483. https://doi.org/10.1016/j.jallcom.2025.18348310.1016/j.jallcom.2025.183483 ↗
53. T.X. Fan, G. Yang, and D. Zhang, Prediction of Chemical Stability in SiCp/Al Composites with Alloying Element Addition Using Wilson Equation and an Extended Miedema model, Mater. Sci. Eng. A, 2005, 394, p 327–338. https://doi.org/10.1016/j.msea.2004.11.04010.1016/j.msea.2004.11.040 ↗
54. Z.C. Liu, F. Ruan, Y.M. Li, T.T. Zhai, M. Zhao, and J.Y. Zhang, Modeling of Amorphous Phase Formation and its Thermodynamic Behaviour in Ce-Mg-H, Ce-Ni-H and Mg-Ni-H, Intermetallics, 2019, 105, p 79–91. https://doi.org/10.1016/jintermet.2018.10.02610.1016/jintermet.2018.10.026 ↗
55. G.R. Jiang, Y. Liu, Y.X. Li, Y.Q. Su, and J.J. Guo, Improvment of Calculation Method for the Activity Coefficient of Multi-Component Alloys, Acta Metall. Sin., 2007, 43, p 503–508. https://doi.org/10.3321/j.issn:0412-1961.2007.05.01110.3321/j.issn:0412-1961.2007.05.011 ↗
56. J. Wan, X.P. Xiao, S.J. Xiong, J.S. Chen, and C.J. Guo, Effect of Si Additions on Mechanical Properties and Softening Resistance of Cu-Ni-Sn-P Alloy, Mater. Today Commun., 2023, 34, 105394. https://doi.org/10.1016/j.mtcomm.2023.10539410.1016/j.mtcomm.2023.105394 ↗
57. P. Sauerschnig, A. Grytsiv, J. Vrestal, V.V. Romaka, B. Smetana, G. Giester, E. Bauer, and P. Rogl, On the Constitution and Thermodynamic Modelling of the System Zr-Ni-Sn, J. Alloys Compd., 2018, 742, p 1058–1082. https://doi.org/10.1016/j.jallcom.2017.12.01210.1016/j.jallcom.2017.12.012 ↗
58. A. Berche, J.C. Tédenac, and P. Jund, Phase Stability of Nickel and Zirconium Stannides, J. Phys. Chem. Solids, 2017, 103, p 40–48. https://doi.org/10.1016/j.jpcs.2016.11.02910.1016/j.jpcs.2016.11.029 ↗
59. J.L. Du, B. Wen, R. Melnik, and Y. Kawazoe, First-Principles Studies on Structural, Mechanical, Thermodynamic and Electronic Properties of Ni-Zr Intermetallic Compounds, Intermetallics, 2014, 54, p 110–119. https://doi.org/10.1016/j.intermet.2014.05.02110.1016/j.intermet.2014.05.021 ↗
60. J.C. Gachon, M. Dirand, and J. Hertz, Enthalpic and Structural Studies of the NiZr System, J. Less-Common Met., 1983, 92, p 307–315. https://doi.org/10.1016/0022-5088(83)90497-610.1016/0022-5088(83)90497-6 ↗
61. A. Pasturel, C. Colinet, and P. Hicter, Heats of Formation in Transition Intermetallic Alloys, Acta Metall., 1984, 32, p 1061–1067. https://doi.org/10.1016/0001-6160(84)90009-910.1016/0001-6160(84)90009-9 ↗
62. C. Colinet, A. Pasturel, and P. Hicter, Trends in Cohesive Energy of Transition Metal Alloys, Calphad: Comput. Coupling Phase Diagr. Thermochem., 1985, 9, p 71–99. https://doi.org/10.1016/0364-5916(85)90032-x10.1016/0364-5916(85)90032-x ↗
63. S.L. Lu, S.M. Du, Z. Li, X.X. Liu, X.C. Wang, and Z.P. Ding, Effect of Zr Addition on Microstructure, Mechanical and Tribological Properties of Cu-Ni-Sn Alloy Fabricated by Spark Plasma Sintering, J. Alloys Compd., 2025, 1015, 178887. https://doi.org/10.1016/j.jallcom.2025.17888710.1016/j.jallcom.2025.178887 ↗
64. X.Y. Ding and X.Q. Chen, Prediction Model of Diffusion Coefficients for Ternary Alloy, Acta Metall. Sin., 2000, 36, p 823–827. https://doi.org/10.3321/j.issn:0412-1961.2000.08.01010.3321/j.issn:0412-1961.2000.08.010 ↗
65. X.H. Lü, Y.Q. Yang, X. Luo, B. Huang, Y.C. Liü, and Y. Chen, Experimental and Theoretical Study of Diffusion Bonding in Fabricating Ti Matrix Composite, Mater. Sci. Eng. A, 2007, 458, p 202–209. https://doi.org/10.1016/j.msea.2006.12.07110.1016/j.msea.2006.12.071 ↗
66. Y. Ouyang, X.P. Gan, Z. Li, K.C. Zhou, S.Z. Zhang, Y.X. Jiang, and X.W. Zhang, Microstructure Evolution of a Cu-15Ni-8Sn-0.8Nb Alloy During Prior Deformation and Aging Treatment, Mater. Sci. Eng. A, 2017, 704, p 128–137. https://doi.org/10.1016/j.msea.2017.07.06510.1016/j.msea.2017.07.065 ↗
67. B.G. Lefevre, A.T. D’annessa, and D. Kalish, Age Hardening in Cu-15Ni-8Sn Alloy, Metall. Trans. A, 1978, 9, p 577–586. https://doi.org/10.1007/BF0264641510.1007/BF02646415 ↗