Improvement of Tribological Performance of AISI H13 Steel by Means of a Self-Lubricated Oxide-Containing Tribo-layer
Source abstract
Abstract
A self-lubricated oxide-containing tribo-layer was induced to form by continuously adding particles of MoS2, Fe2O3 or their mixtures onto sliding interfaces of AISI H13 and 52100 steels. The artificial tribo-layer was always noticed to form continuously and cover the worn surface (termed as cover-type), whereas the original tribo-layer spontaneously formed with no additive was usually discontinuous and inserted into the substrate (termed as insert-type). Clearly, the cover-type and insert-type tribo-layers exactly corresponded to low and high wear rates, respectively. For the mixed additives of Fe2O3 + MoS2, the protective tribo-layers presented a load-carrying capability and lubricative function, which are attributed to the existence of Fe2O3 and MoS2. Hence, the wear rates and friction coefficients of H13 steel were markedly reduced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. T.F.J. Quinn, Oxidational Wear, Wear, 1971, 18, p 413–41910.1016/0043-1648(71)90005-6 ↗
2. S.C. Lim and M.F. Ashby, Wear Mechanism Maps, Acta Mater., 1987, 35, p 1–2410.1016/0001-6160(87)90209-4 ↗
3. G. Straffelini, D. Trabucco, and A. Molinari, Oxidative Wear of Heat-Treated Steels, Wear, 2001, 250, p 485–49110.1016/S0043-1648(01)00661-5 ↗
4. G. Straffelini, D. Trabucco, and A. Molinari, Sliding Wear of Austenitic and Austenitic-Ferritic Stainless Steels, Metall. Mater. Trans., 2002, 33A, p 613–62410.1007/s11661-002-0123-4 ↗
5. M. Varenberg, G. Halperin, and I. Etsion, Different Aspects of the Role of Wear Debris in Fretting Wear, Wear, 2002, 252, p 902–91010.1016/S0043-1648(02)00044-3 ↗
6. M.X. Wei, S.Q. Wang, K.M. Chen, and X.H. Cui, Relations Between Oxidative Wear and Cr Content of Steels, Wear, 2011, 272, p 110–121
7. Q.Y. Zhang, K.M. Chen, L. Wang, X.H. Cui, and S.Q. Wang, Characteristics of Oxidative Wear and Oxidative mild Wear, Tribol. Int., 2013, 61, p 214–22310.1016/j.triboint.2013.01.003 ↗
8. S.Q. Wang, M.X. Wei, F. Wang, X.H. Cui, and K.M. Chen, Effect of Morphology of Oxide Scale on Oxidation Wear in Hot Working Die Steels, Mater. Sci. Eng., 2009, 505A, p 20–2610.1016/j.msea.2008.10.032 ↗
9. M.X. Wei, F. Wang, S.Q. Wang, and X.H. Cui, Comparative Research on the Elevated-Temperature Wear Resistance of a Cast Hot-Working Die Steel, Mater. Des., 2009, 30, p 3608–361410.1016/j.matdes.2009.02.023 ↗
10. X.H. Cui, S.Q. Wang, F. Wang, and K.M. Chen, Research on Oxidation Wear Mechanism of the Cast Steels, Wear, 2008, 265, p 468–47610.1016/j.wear.2007.11.015 ↗
11. M.X. Wei, S.Q. Wang, K.M. Chen, and X.H. Cui, Relations Between Oxidative Wear and Cr Content of Steels, Wear, 2011, 272, p 110–121
12. T.F.J. Quinn, J.L. Sullivan, and D.M. Rowson, Origins and Development of Oxidational Wear at Low Ambient Temperatures, Wear, 1984, 94, p 175–19110.1016/0043-1648(84)90053-X ↗
13. T.F.J. Quinn, J.L. Sullivan, and D.M. Rowson, Developments in the Oxidational Theory of Mild Wear, Tribol. Int., 1980, 13, p 153–15810.1016/0301-679X(80)90031-6 ↗
14. J.E. Wilson, F.H. Stott, and G.C. Wood, The Development of Wear Protective Oxides and Their Influence on Sliding Friction, Proc. R. Soc. A, 1980, 369, p 557–57410.1098/rspa.1980.0016 ↗
15. E. Rabinowicz, Lubrication of Metal Surfaces by Oxide Films, ASLE Trans., 1967, 10, p 400–40710.1080/05698196708972199 ↗
16. H. Kato, Severe-Mild Wear Transition by Supply of Oxide Particles on Sliding Surface, Wear, 2003, 255, p 426–42910.1016/S0043-1648(03)00077-2 ↗
17. A.L. Black and R.W. Dunster, Comparative Study of Surface Deposits and Behaviour of MoS2 Particles and Molybdenum Dialkyl-dithio-phosphate, Wear, 1969, 13, p 119–13210.1016/0043-1648(69)90507-9 ↗
18. J. Gansheimer and R. Holinski, A Study of Solid Lubricants in Oils and Greases Under Boundary Conditions, Wear, 1972, 19, p 439–44910.1016/0043-1648(72)90317-1 ↗
19. Q.Y. Zhang, Y. Zhou, L. Wang, X.H. Cui, and S.Q. Wang, Accelerated Formation of Tribo-oxide Layer and Its Function During Sliding of a Titanium Alloy, Tribol. Lett., 2016, 63, p 1–1310.1007/s11249-016-0692-9 ↗
20. Q.Y. Zhang, S.Q. Wang, Y. Zhou, K.M. Chen, L. Wang, and X.H. Cui, Artificial Oxide-Containing Tribo-layers and Their Effect on Wear Performance of Ti-6Al-4V Alloy, Tribol. Int., 2017, 105, p 334–34410.1016/j.triboint.2016.10.022 ↗
21. K.C. Ludema, Third Bodies in Wear Models, Wear Particles: From the Cradle to the Grave, D. Dowson, C.M. Taylor, T.H.C. Childs, M. Godet, and G. Dalmaz, Ed., Elsevier, Amsterdam, 1992, p 155–160
22. D.A. Rigney, Transfer, Mixing and Associated Chemical and Mechanical Processes During the Sliding of Ductile Materials, Wear, 2000, 245, p 1–910.1016/S0043-1648(00)00460-9 ↗
23. J. Jiang, F.H. Stott, and M.M. Stack, The Role of Triboparticulates in Dry Sliding Wear, Tribol. Int., 1998, 31, p 245–25610.1016/S0301-679X(98)00027-9 ↗
24. E.R. Leheup and R.E. Pendlebury, Unlubricated Reciprocating Wear of Stainless Steel with an Interfacial Air Flow, Wear, 1991, 142, p 351–37210.1016/0043-1648(91)90174-S ↗
25. K. Hiratsuka and K. Muramoto, Role of Wear Particles in Severe-Mild Wear Transition, Wear, 2005, 259, p 467–47610.1016/j.wear.2005.02.102 ↗
26. F.H. Stott, High-Temperature Sliding Wear of Metals, Tribol. Int., 2002, 35, p 489–49510.1016/S0301-679X(02)00041-5 ↗
27. R.M. German, Powder Metallurgy Science, Princeton, MPIF, 1984, p 146
28. H. Kato and K. Komai, Tribofilm Formation and Mild Wear by Tribo-sintering of Nanometer-Sized Oxide Particles On Rubbing Steel Surfaces, Wear, 2007, 262, p 36–4110.1016/j.wear.2006.03.046 ↗
29. A.M. Brown and M.F. Ashby, Correlations for Diffusion Constants, Acta Metall., 1980, 28, p 1085–110110.1016/0001-6160(80)90092-9 ↗
30. W. Ames and A.T. Alpas, Wear Mechanisms in Hybrid Composites of Graphite-20 SiC in A356 Aluminum Alloy (Al-7 Pct Si-0.3 Pct Mg), Metall. Mater. Trans., 1995, 26A, p 85–9810.1007/BF02669796 ↗
31. K.H. Hu, M. Liu, Q.J. Wang, Y.F. Xu, S. Schraube, and X.G. Hu, Tribological Properties of Molybdenum Disulfide Nanosheets by Monolayer Restacking Process as Additive in Liquid Paraffin, Tribol. Int., 2009, 42, p 33–3910.1016/j.triboint.2008.05.016 ↗
32. J. Kogovse, M. Remskar, A. Mrzel, and M. Kalin, Influence of Surface Roughness and Running-in on the Lubrication of Steel Surfaces with Oil Containing MoS2 Nanotubes In All Lubrication Regimes, Tribol. Int., 2013, 61, p 40–4710.1016/j.triboint.2012.12.003 ↗
33. J. Xu, W. Liu, and M. Zhong, Microstructure and Dry Sliding Wear Behavior of MoS2/TiC/Ni Composite Coatings Prepared by Laser Cladding, Surf. Coat Technol., 2006, 200, p 4227–423210.1016/j.surfcoat.2005.01.036 ↗