journal article·2017-06-01

Comparisons of Elasticity Moduli of Different Specimens Made Through Three Dimensional Printing

Mahbub Ahmed, Md Islam, Justin Vanhoose, Mosfequr Rahman

Publisher page

Abstract

Abstract The advent of three-dimensional (3D) printing technology changed modern manufacturing in many different ways. 3D printed parts based on the fused deposition method (FDM) are widely used in many different applications. However, parts made from polymer-based filaments are generally not strong enough to meet engineering needs. Today, plastic filaments reinforced with carbon fibers and carbon nanotubes are also available in the market to be used in FDM-based 3D printers. Whether reinforcing regular plastic filaments with carbon fibers or carbon nanotubes improves mechanical properties of 3D printed parts is a big question. The purpose of the current research is to investigate the mechanical properties of 3D-printed specimens from these composite filaments. Tensile testing was carried out on a set of 3D-printed specimens made from ABS, PLA, carbon fiber-reinforced ABS, carbon fiber-reinforced PLA, and nanotube-reinforced ABS filaments. The specimens for testing were designed according to ASTM guidelines. A small tensile testing machine with a real-time data acquisition system was used for testing and collecting data. For each material, the test was carried out multiple times. The results showed that for a given material the standard deviation is very small indicating high repeatability of the data. Statistical analysis using Student- t distribution shows that the modulus of elasticity for the reinforced filaments was higher than their nonreinforced counterparts.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Southern Arkansas University

Georgia Southern University

References (16)

Show source-provided references
1. 10.1016/S0007-8506(07)63240-510.1016/S0007-8506(07)63240-5 ↗
2. 10.1016/j.mechatronics.2013.06.00210.1016/j.mechatronics.2013.06.002 ↗
3. 10.1016/j.ijpe.2015.02.02010.1016/j.ijpe.2015.02.020 ↗
4. 10.1016/j.polymer.2016.03.04810.1016/j.polymer.2016.03.048 ↗
5. 10.1016/j.compscitech.2016.02.02110.1016/j.compscitech.2016.02.021 ↗
6. 10.1016/j.compositesb.2015.06.01310.1016/j.compositesb.2015.06.013 ↗
7. 10.1557/jmr.2014.21210.1557/jmr.2014.212 ↗
8. 10.1016/j.compositesa.2016.05.03210.1016/j.compositesa.2016.05.032 ↗
9. 10.1016/j.matdes.2015.10.12310.1016/j.matdes.2015.10.123 ↗
10. 10.1016/j.compscitech.2014.10.00910.1016/j.compscitech.2014.10.009 ↗
11. 10.1016/j.proeng.2015.12.48310.1016/j.proeng.2015.12.483 ↗
12. 10.1016/j.compositesb.2016.03.08910.1016/j.compositesb.2016.03.089 ↗
13. 10.1088/1742-6596/451/1/01201010.1088/1742-6596/451/1/012010 ↗
14. Tsiakatouras G, , Tsellou E, , Stergiou C. Comparative study on nanotubes reinforced with carbon filaments for the 3D printing of mechanical parts. World Trans Eng Technol Educ, 2014; 12:392–396.
15. Engineering Toolbox. Available at: www.engineeringtoolbox.com/young-modulus-d_417.html (Accessed November24 2016).
16. 10.1016/j.matdes.2014.02.03810.1016/j.matdes.2014.02.038 ↗