Demonstration and characterization of insertable passive thermal switches for dynamic building envelopes
Source abstract
Abstract
A dynamic building envelope integrated with thermal energy storage, such as phase change material (PCM), is an emerging technology that offers a promising solution to improve the energy efficiency of buildings. This study reports the development of insertable thermal switches, which modulate thermal resistance, thereby making building envelopes dynamic and enhancing the use of free ambient heating and cooling. The reported thermal switches are passive, meaning they work solely based on indoor and outdoor temperatures. A single switch when inserted into 10 × 10-in (0.064-m 2 ) XPS foam board insulation demonstrates effective thermal conductivity of 0.050 W/m-K in the resistive state and 0.285 W/m-K in the conductive state. Thermal switches exhibit an effective switching ratio of 5.7, with no noticeable degradation in performance over 770 cycles. Additionally, when integrated into a wall sample containing a PCM layer, switches significantly reduce the PCM solidification time by 43.2% during the cooling process.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Building Energy and Comfort Optimization · Urban Heat Island Mitigation · Solar Energy Systems and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. International Energy Outlook 2023
2. Building energy efficiency and load flexibility optimization using phase change materials under futuristic grid scenario10.1016/j.jclepro.2022.130561 ↗
3. Modeling global residential sector energy demand for heating and air conditioning in the context of climate change10.1016/j.enpol.2008.09.051 ↗
4. Assessment of climate change impact on building energy use and mitigation measures in subtropical climates10.1016/j.energy.2011.01.033 ↗
5. Experimental thermal study of a solar wall of composite type10.1016/S0378-7788(96)00974-7 ↗
6. Modeling of a novel Trombe wall with PV cells10.1016/j.buildenv.2006.01.005 ↗
7. Thermal performance of phase change materials (PCM)-enhanced cellulose insulation in passive solar residential building walls10.1016/j.solener.2018.01.086 ↗
8. Thermal optimization of a novel thermo-optically responsive SS-PCM coatings for building enclosures10.1016/j.enbuild.2021.111129 ↗
9. Cooling the cities–a review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments10.1016/j.solener.2012.07.003 ↗
10. An integrated empirical and modeling methodology for analyzing solar reflective roof technologies on commercial buildings10.1016/j.buildenv.2009.07.001 ↗
11. Potential energy savings benefits and limitations of radiative cooling coatings for US residential buildings10.1016/j.jclepro.2022.134763 ↗
12. Effective properties of semitransparent radiative cooling materials with spectrally variable properties10.1016/j.applthermaleng.2022.118048 ↗
13. Energy performance assessment of an electrochromic window10.1016/j.tsf.2005.07.294 ↗
14. Potential of emerging glazing technologies for highly glazed buildings in hot arid climates10.1016/j.enbuild.2007.05.006 ↗
15. Manufacture and cost of vacuum glazing10.1016/0038-092X(95)00046-T ↗
16. A novel passive polymer-sorbent thermal battery for low-temperature energy applications: A numerical feasibility study10.1016/j.est.2022.105971 ↗
17. Thermal energy storage for grid applications: Current status and emerging trends10.3390/en13020340 ↗
18. Thermal storage integrated into air-source heat pumps to leverage building electrification: A systematic literature review10.1016/j.applthermaleng.2022.118975 ↗
19. Adaptive building roof by coupling thermochromic material and phase change material: Energy performance under different climate conditions10.1016/j.conbuildmat.2020.120481 ↗
20. Adaptive thermochromic roof system: Assessment of performance under different climates10.1016/j.enbuild.2019.02.040 ↗
21. Adaptive measures for mitigating urban heat islands: The potential of thermochromic materials to control roofing energy balance10.1016/j.apenergy.2019.04.020 ↗
22. Advances toward a net-zero global building sector10.1146/annurev-environ-012420-045843 ↗
23. Climate adaptive building shells: State-of-the-art and future challenges10.1016/j.rser.2013.04.016 ↗
24. Adaptive building envelopes of multistory buildings as an example of high performance building skins10.1016/j.aej.2018.11.013 ↗
25. Solar drying10.1016/j.solener.2009.10.001 ↗
26. Heat switches for ADRs10.1016/j.cryogenics.2014.03.017 ↗
27. Colloquium: Phononics: Manipulating heat flow with electronic analogs and beyond10.1103/RevModPhys.84.1045 ↗
28. Highly efficient phase-tunable photonic thermal diode10.1063/5.0036485 ↗
29. Techno-enviro-exergo-economic and water hygiene assessment of non-cover box solar still employing parabolic dish concentrator and thermoelectric peltier effect10.1016/j.psep.2022.04.006 ↗
30. Characterisation of thermal diode panels for use in the cooling season in buildings10.1016/S0378-7788(01)00090-1 ↗
31. Thermal memory: a storage of phononic information10.1103/PhysRevLett.101.267203 ↗
32. A review of heat transfer characteristics of switchable insulation technologies for thermally adaptive building envelopes10.1016/j.enbuild.2019.07.004 ↗
33. Design and control optimisation of adaptive insulation systems for office buildings. Part 2: A parametric study for a temperate climate10.1016/j.energy.2017.03.096 ↗
34. Deployment and control of adaptive building facades for energy generation, thermal insulation, ventilation and daylighting: A review10.1016/j.applthermaleng.2020.116331 ↗
35. Room-temperature voltage tunable phonon thermal conductivity via reconfigurable interfaces in ferroelectric thin films10.1021/nl504505t ↗
36. Anomalously low electronic thermal conductivity in metallic vanadium dioxide10.1126/science.aag0410 ↗
37. Thermal conductance switching based on the actuation of liquid droplets through the electrowetting on dielectric (EWOD) phenomenon10.1016/j.applthermaleng.2015.11.098 ↗
38. Contact-Based Passive Thermal Switch with a High Rectification Ratio10.1021/acsengineeringau.2c00046 ↗
39. Efficient thermal management of Li-ion batteries with a passive interfacial thermal regulator based on a shape memory alloy10.1038/s41560-018-0243-8 ↗
40. A non-volatile thermal switch for building energy savings
41. Kosny · 2013
42. Dynamic thermal performance analysis of fiber insulations containing bio-based phase change materials (PCMs)10.1016/j.enbuild.2012.05.021 ↗
43. Modulating thermal load through lightweight residential building walls using thermal energy storage and controlled precooling strategy10.1016/j.applthermaleng.2020.115870 ↗
44. Evaluating cascaded and tunable phase change materials for enhanced thermal energy storage utilization and effectiveness in building envelopes10.1016/j.enbuild.2022.111937 ↗
45. A review on phase change material (PCM) for sustainable passive cooling in building envelopes10.1016/j.rser.2016.03.036 ↗
46. Phase-change materials (PCM) for automotive applications: A review10.1016/j.applthermaleng.2017.12.097 ↗
47. PCM, nano/microencapsulation and slurries: A review of fundamentals, categories, fabrication, numerical models and applications
48. Optimizing PCM-integrated walls for potential energy savings in U.S. Buildings10.1016/j.enbuild.2020.110355 ↗
49. Parametric and sensitivity analysis of a PCM-integrated wall for optimal thermal load modulation in lightweight buildings10.1016/j.applthermaleng.2021.116568 ↗
50. Potential energy savings from deployment of Dynamic Insulation Materials for US residential buildings10.1016/j.buildenv.2016.12.009 ↗
51. Control strategies for dynamic insulation materials applied to commercial buildings10.1016/j.enbuild.2017.08.084 ↗
52. Enhancing building energy performance by effectively using phase change material and dynamic insulation in walls10.1016/j.apenergy.2020.116306 ↗
53. Kishore · 2024
54. Kishore, R.A., Kommandur, S., Booten, C.W., Wheeler, L.M., Cui, S., and Xiao, Z. (2024). Thermal diode and thermal switch for bi-directional heat transfer in building envelopes. US Patent U.S. 2024/0281010 A1.
55. www.rubitherm.eu RT21HC Data sheet: www.rubitherm.eu/media/products/datasheets/Techdata_-RT21HC_EN_09102020.PDF. Accessed on Mar 5, 2025.