Cyclic cumulative damage and precursor response characteristics of carbon-reinforced concrete lining in abandoned mine gas storage chambers
Source abstract
Abstract
The surrounding rock-lining structure is highly susceptible to cyclic cumulative damage under injection-production cyclic stress. To address the insufficient resistance and damage perception of traditional lining materials under graded cyclic loading-unloading, a multi-carbon reinforced concrete (MCRC) was developed in this study. A rate-coupled graded cyclic loading-unloading test method was employed to investigate the cyclic damage evolution and precursor response characteristics of MCRC, integrating acoustic emission (AE), resistivity, and digital image correlation (DIC) techniques. The results demonstrate that incorporating carbon-based materials significantly enhances the mechanical performance and cyclic load resistance of concrete, with the compressive strength of the XH9 group increasing by 18.9%. The residual strain and elastic modulus exhibit a distinct three-stage evolution, and the carbon-based composites show superior crack inhibition and deformation compatibility compared with the control specimens. The carbon-based materials primarily refine the microstructure by filling micropores and interfacial defects, thereby promoting effective bridging and stress transfer, which enhances interfacial bonding strength and material toughness. A three-dimensional reinforcement network is established to redistribute stress, delay the damage accumulation process, and enable the formation of conductive pathways for self-sensing and damage monitoring. Multi-parameter synergistic responses, including a sudden increase in ringing counts, an initial decrease followed by an increase in the b-value, nonlinear resistivity variation, and synchronized strain, are all the key precursor characteristics of the transition from damage accumulation to instability failure. Coupled predictive analysis indicates that the b-value prediction interval is 93–96%, the RA-AF critical slowing down (CSD) variance prediction interval is 87–92%, and the autocorrelation coefficient prediction range is 85–93%. This study provides new insights into the design and damage monitoring theory of advanced lining materials for underground gas storage in abandoned mines.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Smart Materials for Construction · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Research status and new design concept of compressed air energy storage technology in abandoned mine
2. Experimental study on the cyclic injection-production performance of the underground gas storage with trans-critical carbon dioxide as cushion gas10.1016/j.energy.2025.139696 ↗
3. Stability evaluation of salt cavern hydrogen storage and optimization of operating parameters under high frequency injection production
4. Characterization of sustainable mortar containing high-quality recycled manufactured sand crushed from recycled coarse aggregate10.1016/j.cemconcomp.2022.104629 ↗
5. New insights into the effects of silicate modulus, alkali content and modification on multi-properties of recycled brick powder-based geopolymer
6. Micro-properties and mechanical behavior of high-ductility engineered geopolymer composites (EGC) with recycled concrete and paste powder as green precursor10.1016/j.cemconcomp.2024.105672 ↗
7. Elucidating the role of recycled concrete aggregate in ductile engineered geopolymer composites: Effects of recycled concrete aggregate content and size
8. Mechanical performance of low-carbon ultra-high performance engineered cementitious composites (UHP-ECC) with high-volume recycled concrete powder
9. Enhancing thermal regulation and mechanical properties of phase change mortar using carbon nanomaterials
10. Physico-mechanical and electrical characterization of mortars enhanced with carbon nanotubes and microfibers10.1016/j.conbuildmat.2025.143537 ↗
11. Effect of industrial multi-walled carbon nanotubes on the mechanical properties and microstructure of ultra-high performance concrete10.1016/j.cemconcomp.2024.105850 ↗
12. Design of a smart lime mortar with conductive micro and nano fillers for structural health monitoring
13. Assessing the potential of nano-reinforced blended lime-cement pastes as self-sensing materials for restoration applications10.1016/j.matpr.2022.02.623 ↗
14. Acoustic emission monitoring of bond failure between carbon fiber-reinforced coral concrete and stainless steel reinforcement under lateral constraints
15. Effect of multi-walled carbon nanotubes (MWCNTs) on the strength development of cementitious materials10.1016/j.jmrt.2018.09.006 ↗
16. Carbon nanotube (CNT) reinforced cementitious composites for structural self-sensing purpose: A review10.1016/j.conbuildmat.2023.131384 ↗
17. Design of a smart lime mortar with conductive micro and nano fillers for structural health monitoring
18. Study on the Mechanical Properties and Durability of Carbon Fiber Reinforced Lime-Based Mortar
19. Back to basics: Nanomodulating calcium silicate hydrate gels to mitigate CO2 footprint of concrete industry
20. Study on self-monitoring of multiple cracked concrete beams with multiphase conductive materials subjected to bending10.1088/1361-665X/ab2cfe ↗
21. Snow melting performance of graphene composite conductive concrete in severe cold environment10.3390/ma14216715 ↗
22. Experimental study on the fracture and fatigue behaviors of flawed sandstone under coupled freeze-thaw and cyclic loads10.1016/j.tafmec.2022.103299 ↗
23. Evolution of acoustic emission activity throughout fine recycled aggregate earth concrete under compressive tests10.1016/j.tafmec.2022.103365 ↗
24. Whole process analysis on splitting tensile behavior and damage mechanism of 3D/4D/5D steel fiber reinforced concrete using DIC and AE techniques10.1016/j.conbuildmat.2024.139295 ↗
25. Investigation on crack evolution behaviors and mechanism on rock-like specimen with two circular-holes under compression10.1016/j.tafmec.2021.103222 ↗
26. Characterization of crack resistance mechanism of fiber modified emulsified asphalt cold recycling mixture based on acoustic emission parameters10.1016/j.conbuildmat.2022.126939 ↗
27. Influence of ultrafine diatomite on cracking behavior of concrete: an acoustic emission analysis10.1016/j.conbuildmat.2021.124993 ↗
28. Quantifying the progressive fracture damage of granite rocks by stress-strain, acoustic emission, and active ultrasonic methods10.1061/(ASCE)MT.1943-5533.0003962 ↗
29. Acoustic Emissions and Seismic Tomography of Sandstone Under Uniaxial Compression: Implications for the Progressive Failure in Pillars
30. Applied technologies and new advances of parallel electrical method in mining geophysics
31. Principle of using borehole electrode current method to monitor the overburden stratum failure after coal seam mining and its application10.1016/j.jappgeo.2020.104111 ↗
32. Electrical monitoring of overburden failure in hard roof working face with thick loose layer and thin bedrock
33. Study on dynamic response characteristics of resistivity in mining failure process of working face
34. AE event rate characteristics of flawed granite: from damage stress to ultimate failure10.1093/gji/ggaa207 ↗
35. Damage progression and acoustic emission in brittle failure of granite and sandstone10.1016/j.ijrmms.2021.104789 ↗
36. Study on fracture mechanism and damage degree of GFRP/steel-concrete hybrid girder by acoustic emission technology
37. Study on the failure characteristics and acoustic emission precursor parameters of concrete under uniaxial compression after freeze-thaw damage10.1016/j.engfailanal.2025.109981 ↗
38. Integration of multi-physical signals for monitoring shear failure in jointed granite: insights from experimental study10.1007/s10064-025-04438-1 ↗
39. Physico-mechanical and electrical characterization of mortars enhanced with carbon nanotubes and microfibers10.1016/j.conbuildmat.2025.143537 ↗
40. Strength, toughness and interface modification of graphene oxide grafted carbon fiber modified concrete10.1016/j.conbuildmat.2024.136336 ↗
41. Research and evaluation on the proportioning of three phase conductive concrete
42. Ministry of Housing and Urban-Rural Development of the People’s Republic of China · 2019 · 5
43. Damage constitutive model of rock under medium and low strain rates
44. Experimental study of load rate effect of salt rock during loading and unloading
45. Research progress on mechanical behavior and interfacial effects of deep coal-rock composite structures [J/OL]
46. Effect of gypsum on low-heat Portland cement early mechanical properties and hydration in the presence of DEIPA10.1016/j.conbuildmat.2024.138477 ↗
47. Experimental study on deformation and failure characteristics of saturated sandstone under graded cyclic loading-unloading
48. Research on classification of rock tensile-shear fracture based on acoustic emission RA-AF values and kneedle algorithm
49. Comparative study on the static and dynamic mechanical properties and micro-mechanism of carbon fiber and carbon nanofiber reinforced concrete
50. Error analysis of b-value of acoustic emission for rock fracture
51. Ncorr: Open-Source 2D Digital Image Correlation Matlab Software10.1007/s11340-015-0009-1 ↗
52. Early-Warning Signals for Critical Transitions10.1038/nature08227 ↗
53. Critical slowing down phenomenon for predicting the failure of solid rocks and cement mortar materials: Insight from acoustic emission multiparameters10.1016/j.conbuildmat.2023.132523 ↗