Assessment of lithium slag as a supplementary cementitious material: Hydration characteristics, pozzolanic reactivity, and strength development
Source abstract
Abstract
This study investigates the feasibility of using lithium slag powder (LSP) as a supplementary cementitious material (SCM) in ordinary Portland cement (OPC) systems. Fly ash (FA) and ground-granulated blast furnace slag (GGBS) were used as reference SCMs to compare setting behavior, hydration heat evolution, and mechanical and pozzolanic performance in blended mortars. The effects of SCM type and replacement ratio (10–50 vol. %) on setting time, calorimetric properties, compressive strength, and calcium hydroxide consumption were systematically examined. LSP exhibited delayed setting behavior comparable to that of FA, attributable to its lower CaO content and relatively high sulfate concentration. However, it showed more pronounced secondary aluminate reactions. Isothermal calorimetry revealed that the hydration of LSP-containing systems exhibited a distinct third heat-evolution peak associated with sulfate–aluminate reactions, indicating the active participation of LSP in the hydration process. Although LSP mortars exhibited lower early-age compressive strength than the plain mortar, strength development accelerated beyond 7 days due to progressive pozzolanic reaction between amorphous aluminosilicates in LSP and Ca(OH) 2 . These results indicate that LSP possesses latent pozzolanic reactivity. However, when LSP is used as a SCM, its relatively high SO₃ content necessitates an assessment of volume stability, and an appropriate replacement level should be determined with this consideration in mind.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Fire effects on concrete materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Overcoming the challenges of integrating variable renewable energy to the grid: a comprehensive review of electrochemical battery storage systems10.1016/j.jpowsour.2023.233343 ↗
2. A review of battery energy storage systems and advanced battery management system for different applications: challenges and recommendations10.1016/j.est.2024.111179 ↗
3. Lithium-ion batteries and the future of sustainable energy: a comprehensive review10.1016/j.rser.2025.115971 ↗
4. Scrivener · 2018
5. Preparation and study of magnesium ammonium phosphate cement from waste lithium slag10.1016/j.jclepro.2021.128371 ↗
6. A comprehensive review of properties of concrete containing lithium refinery residue as partial replacement of cement10.1016/j.conbuildmat.2022.127053 ↗
7. High performance C-A-S-H seeds from fly ash-carbide slag for activating lithium slag towards a low carbon binder10.1016/j.jenvman.2023.118658 ↗
8. Microstructure of ultra-high-performance concrete (UHPC)—A review study
9. Hydration properties and kinetic characteristics of blended cement containing lithium slag powder
10. Mechanical properties, drying shrinkage, and creep of concrete containing lithium slag10.1016/j.conbuildmat.2017.04.166 ↗
11. Products and properties of steam cured cement mortar containing lithium slag under partial immersion in sulfate solution10.1016/j.conbuildmat.2019.06.062 ↗
12. Transport properties of concrete containing lithium slag10.1016/j.conbuildmat.2024.135073 ↗
13. Insight to workability, compressive strength and microstructure of lithium slag-steel slag based cement under standard condition
14. Recycling lithium slag into eco-friendly ultra-high performance concrete: Hydration process, microstructure development, and environmental benefits
15. Preparation of geopolymers from thermally activated lithium slag: Activity enhancement and microstructure
16. Preparation for micro-lithium slag via wet grinding and its application as accelerator in Portland cement10.1016/j.jclepro.2019.119528 ↗
17. An effective method for directly extracting lithium from α-spodumene by activated roasting and sulfuric acid leaching10.1016/j.jiec.2023.03.017 ↗
18. The beneficiation of lithium minerals from hard rock ores: A review10.1016/j.mineng.2018.11.023 ↗
19. Literature review and thermodynamic modelling of roasting processes for lithium extraction from spodumene10.3390/met10101312 ↗
20. Extraction of lithium from lepidolite via iron sulphide roasting and water leaching10.1016/j.hydromet.2015.03.002 ↗
21. An investigation on Portland cement replaced by high-volume GGBS pastes modified with micro-sized metakaolin subjected to elevated temperatures10.1016/j.ijsbe.2016.10.002 ↗
22. Review: The formation, characteristics, and resource utilization of lithium slag10.1016/j.conbuildmat.2024.136648 ↗
23. Assessment of lithium slag as a supplementary cementitious material: Pozzolanic activity and microstructure development10.1016/j.cemconcomp.2023.105262 ↗
24. Reproducible mini-slump test procedure for measuring the yield stress of cementitious pastes10.1617/s11527-017-1103-x ↗
25. Influence of water-reducing admixtures on properties of cement paste—A miniature slump test10.1520/CCA10190J ↗
26. Spread is better: An investigation of the mini-slump test10.1016/j.mineng.2014.11.001 ↗
27. Evaluating the effect of high fly ash content and low curing temperature on early hydration heat of blended cement based on isothermal calorimetric method10.1016/j.conbuildmat.2024.136110 ↗
28. Fundamental understanding of the setting behaviour of the alkali activated binders based on ground granulated blast furnace slag and fly ash10.1016/j.conbuildmat.2021.123243 ↗
29. Hydration and properties of nano-TiO2 blended cement composites10.1016/j.cemconcomp.2012.02.009 ↗
30. Hydration of Portland cement with high replacement by siliceous fly ash10.1016/j.cemconres.2012.06.009 ↗
31. Factors influencing the sulfate balance in pure phase C3S/C3A systems10.1016/j.cemconres.2020.106085 ↗
32. The influence of sulfate addition on hydration kinetics and C–S–H morphology of C₃S and C₃S/C₃A systems10.1016/j.cemconres.2022.106930 ↗
33. Fresh state and hydration properties of high-volume lithium slag cement composites10.1617/s11527-023-02177-x ↗
34. Hydration and pore-structure characteristics of high-volume fly ash cement pastes10.1016/j.conbuildmat.2021.122390 ↗
35. Improving the volume stability of the β-hemihydrate phosphogypsum—Cement system by incorporating GGBS10.1016/j.conbuildmat.2023.133807 ↗
36. Effects of the physicochemical properties of fly ash on the compressive strength of high-volume fly ash mortar10.1016/j.conbuildmat.2016.08.148 ↗
37. Effect of fly ash fineness on microstructure of blended cement paste10.1016/j.conbuildmat.2005.12.024 ↗
38. Investigating the governing factors influencing the pozzolanic activity through a database approach for the development of sustainable cementitious materials10.1016/j.conbuildmat.2023.134253 ↗
39. Transition and decomposition temperatures of cement phases—A collection of thermal analysis data
40. Effect of ion chelator on hydration process of Portland cement10.1016/j.conbuildmat.2020.119727 ↗