journal article·2026-07Open access

Effect of rubber particles on compressive strength and deformation properties of concrete: Experimental investigation and DEM simulations

Yukai Zhang, Xiaoqiang Zhang, Kai Wang, Shiyu Zhang, Yulong Jiang, Fumin Zhang, Wenwei Wang

Abstract

To meet the requirements of flexible load-bearing in underground engineering, the incorporation of rubber and fibers into concrete combined with the optimization of aggregate gradation to enhance the deformability and energy absorption capacity of gob-side backfill bodies is of great research significance. In this study, 0.5% polypropylene fibers (PPF) and 1% steel fibers (SF) were added to normal concrete, while 10-mesh and 20-mesh rubber particles were used to partially replace fine aggregates at different replacement ratios to produce Hybrid fiber-reinforced rubber concrete (HFRC). Uniaxial compression tests, digital image correlation (DIC) monitoring, scanning electron microscope (SEM) observation, and discrete element method (DEM) simulations were conducted to systematically investigate the mechanical behaviors, crack propagation characteristics, and energy evolution mechanisms of HFRC. The results indicate that with increasing rubber content, the compressive strength, elastic modulus, and Poisson’s ratio gradually decrease, whereas the peak longitudinal strain first increases and then decreases. HFRC incorporating 10-mesh rubber particles exhibits superior overall mechanical performance, which is characterized by narrower cracks and more significant fiber pull-out and bridging effects, with a threshold replacement ratio of approximately 30%. When the rubber content reaches 40%, significant mechanical deterioration occurs for both rubber particle sizes, and the particle-size effect becomes negligible. DEM analyses further reveal that 10-mesh rubber HFRC maintains better matrix integrity during the elastic stage but undergoes accelerated force-chain attenuation after peak stress. At peak strength, the input and dissipated energies of HFRC are approximately 4.7–4.9 and 2.2–2.3 times those of normal concrete, respectively, demonstrating a markedly enhanced energy absorption capacity. These findings provide theoretical insights into the deformation and energy dissipation mechanisms of HFRC and offer practical guidance for the design and application of deformable backfill materials in flexible support systems for underground engineering.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tailings Management and Properties · Innovative concrete reinforcement materials · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Research on the mechanism and control of roof deformation in gob-side entry retaining of close-distance coal seams10.1016/j.engfailanal.2024.108682 ↗
2. Parameter determination and effect evaluation of gob-side entry retaining by directional roof cutting and pressure releasing10.1016/j.engfailanal.2023.107847 ↗
3. Stability analysis of roadside backfill body at gob-side entry retaining under combined static and dynamic loading10.1016/j.engfailanal.2021.105531 ↗
4. Research on the mechanical properties of flexible material backfilling wall in gob-side entry retaining10.3390/min12081020 ↗
5. Mechanical properties of macro-synthetic fiber reinforced rubber concrete under uniaxial loading10.1016/j.conbuildmat.2024.137821 ↗
6. Analytical evaluation of stress-strain behavior of rubberized concrete incorporating waste tire crumb rubber10.1016/j.jclepro.2024.141963 ↗
7. Research on the energy-absorbing and cushioning performance of a new half-bowl ball rubber body in tunnel support10.3390/pr12091981 ↗
8. Experimental study on performance of spring damping support structure system for large deformation tunnel in soft rock10.1016/j.undsp.2023.08.012 ↗
9. Experimental investigation on static compressive toughness of steel fiber rubber concrete10.1515/rams-2022-0260 ↗
10. Design and strength optimization method for the production of structural lightweight concrete: an experimental investigation for the complete replacement of conventional coarse aggregates by waste rubber particles10.1016/j.resconrec.2022.106390 ↗
11. Study on the seawater freeze-thaw deterioration mechanism and compressive constitutive model of rubber recycled aggregate concrete10.1016/j.istruc.2025.110779 ↗
12. Effect of rubber surface treatment on damping performance of rubber - mortar ITZ in rubberized concrete
13. Role of recycled vehicle tires quantity and size on the properties of metakaolin-based geopolymer rubberized concrete10.1016/j.jmrt.2022.03.103 ↗
14. Mechanical behavior and impact resistance of rubberized concrete enhanced by basalt fiber-epoxy resin composite10.1016/j.conbuildmat.2024.136836 ↗
15. Experimental study on freeze-thaw failure of concrete incorporating waste tire crumb rubber and analytical evaluation of frost resistance10.1016/j.conbuildmat.2024.137356 ↗
16. Research on physical and mechanical properties of alkaline-modified self-compacting rubber concrete10.1016/j.conbuildmat.2025.142251 ↗
17. Synergistic effects of oyster shell powder, rubber particles, and silane coupling agent KH-550 on the mechanical and freeze - thaw performance of concrete10.1016/j.conbuildmat.2025.144849 ↗
18. Performance and applications of polymer fiber rubber-reinforced concrete in civil engineering: a state-of-the-art review
19. Enhancing structural integrity and crack resistance of rubberized concrete using aqua-thermally treated rubber aggregates and recycled tire steel fibers for structural applications
20. Impact-abrasion resistance and post-damage durability of ultra-high performance concrete for building structures: Role of rubber particles and hybrid fibers
21. Effect of hybrid fibre reinforcement and rubber aggregates on the flexural performance of reinforced concrete beams10.1038/s41598-025-29019-w ↗
22. Production of sustainable steel fiber-reinforced rubberized concrete with enhanced mechanical properties: a state-of-the-art review
23. Comparison of DEM Software with Polyhedral Particle Shapes10.1061/9780784485347.012 ↗
24. Experimental and numerical investigation of concrete properties and crack propagation in concrete incorporating different sizes of recycled tire rubber particles10.1016/j.conbuildmat.2025.144117 ↗
25. 3D mesoscale discrete element modeling of hybrid fiber-reinforced concrete10.1016/j.conbuildmat.2024.138006 ↗
26. Evolution law study of pore and fracture of coal gangue cemented filling body under axial compression using PFC2D10.1016/j.conbuildmat.2023.134340 ↗
27. Analysis of the mechanism and effects of advanced pipes support in roadways10.1038/s41598-025-00035-0 ↗
28. JGJ 55-2011 Specification for mix proportion design of ordinary concrete, 2011.
29. BS EN 206-1-2013, Concrete-Specification, Performance, Production and Conformity, 2013.
30. Multi-scale study on the crack resistance and energy dissipation mechanism of modified rubberized concrete10.1016/j.conbuildmat.2024.139448 ↗
31. Impact of sand to aggregate ratio on mechanical properties and micro-structures of waste crumb rubber concrete
32. GB/T 50081-2019, Standard for test methods of concrete physical and mechanical properties. Ministry of Housing and Urban-Rural Development, 2019.
33. Failure characteristics and the damage evolution of a composite bearing structure in pillar-side cemented paste backfilling10.1007/s12613-022-2545-x ↗
34. A review of the pore structure of pervious concrete: analyzing method, characterization parameters and the effect on performance10.1016/j.conbuildmat.2022.129971 ↗
35. Experimental study on dynamic modulus of high content rubber asphalt mixture
36. Study on acoustic emission characteristics of self-compacting concrete under uniaxial compression test10.32604/jrm.2022.019660 ↗
37. Mechanical properties, durability, and structural applications of rubber concrete: a state-of-the-art-review
38. Fracture properties and mechanisms of steel fiber and glass fiber reinforced rubberized concrete
39. Experimental study on crack propagation pattern and fracture process zone evolution based on far-field displacement by using DIC10.1038/s41598-023-44458-z ↗
40. Experimental and analytical investigations of crack removal phenomenon in highly deformable rubbers weakened by a crack and loaded in Mode-I conditions10.1111/ffe.14510 ↗
41. Influences of leaching on the composition, structure and morphology of calcium silicate hydrate (C-S-H) with different Ca/ Si ratios
42. Compressive performance of double steel tube confined geopolymer concrete columns incorporated with waste rubber10.1016/j.istruc.2025.110960 ↗
43. Approach for determining micro-strength parameters of rock based on particle flow code
44. Effect of curing time on the mesoscopic parameters of cemented paste backfill simulated using the particle flow code technique10.1007/s12613-020-2007-2 ↗
45. Itasca · 2023
46. Study on the tensile and compressive mechanical properties of multi-scale fiber-reinforced concrete: laboratory test and mesoscopic numerical simulation
47. Study on the interfacial bond behavior of steel fibers embedded in cement-based materials under hot-dry environments
48. Rock macro-meso parameter calibration and optimization based on improved BP algorithm and response surface method in PFC 3D10.3390/en15176290 ↗
49. Mesoscopic shear evolution characteristics of frozen soil-concrete interface10.1016/j.coldregions.2024.104342 ↗
50. Study on the force chain characteristics with coal dust layer and the three-body contact stiffness10.1016/j.partic.2024.05.014 ↗
51. Effect of wollastonite microfibers and waste tire rubber on mechanical properties of concrete10.1186/s40069-023-00595-3 ↗
52. Characterization of three-dimensional strong force chain properties of mineral aggregate mixtures based on the discrete element method