Fabrication and properties of porous geopolymers modified with n-octyltriethoxysilane
Source abstract
Abstract
Porous geopolymer is a new green inorganic thermal insulation material, which is consistent with the sustainable development of ecological environment. However, the durability and mechanical properties of porous geopolymer materials are easy affected by efflorescence phenomenon. In this work, the effect of n-octyltriethoxysilane on pore structure and properties of metakaolin/slag-based porous geopolymer was investigated. Moreover, the hydrophobic mechanism was discussed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and scanning electron microscopy (SEM) equipped with energy dispersive spectrometer (EDS). The results showed that porosity of porous geopolymer increased with the increase of n-octyltriethoxysilane, and the pore size distribution gradually narrowed. Compressive strength of materials decreased with the addition of n-octyltriethoxysilane. However, water absorption showed a reduction of 50%-63.7% in compared with that of blank group, and contact angle was as high as 152.6°. Furthermore, the impact of n-octyltriethoxysilane on thermal conductivity was not significant. In addition, the efflorescence precipitated on specimens almost could be ignored when 1.5% n-octyltriethoxysilane was introduced. From a microscopic perspective, the addition of n-octyltriethoxysilane to porous geopolymer could reduce cracks on materials, increase the multistage roughness and grafted hydrophobic functional groups to the surface of geopolymer, which resulted in hydrophobic properties. ● Porous geopolymer materials were modified to be hydrophobic using n-octyltriethoxysilane with an integral method. ● The incorporation of n-octyltriethoxysilane endowed the porous geopolymer with remarkable hydrophobicity, which refined the pore structure and led to an increased porosity. ● The addition of 1.5% n-octyltriethoxysilane significantly mitigated the detrimental efflorescence phenomenon. ● The hydrophobicity stemmed from the combined effect of reduced microcracks, induced multi-scale surface roughness and the grafting of hydrophobic functional groups.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Polymer Nanocomposites and Properties · Microbial Applications in Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Geopolymer foam with low thermal conductivity based on industrial waste10.3390/ma17246143 ↗
2. Simple and effective route to tailor the thermal, acoustic and hygrothermal properties of cork-containing waste derived inorganic polymer composites
3. Multifunctional CeO2-coated pulp/cellulose nanofibers (CNFs) membrane for wastewater treatment: effective oil/water separation, organic contaminants photodegradation, and anti-bioadhesion activity10.1016/j.indcrop.2023.116672 ↗
4. Ultra-light foamed concrete mechanical properties and thermal insulation perspective: a comprehensive review10.1016/j.jcou.2024.102827 ↗
5. Design and thermal performance analysis of self-insulation concrete compound blocks10.3389/fphy.2024.1490012 ↗
6. Thermal performance of concrete masonry units containing insulation and phase change material
7. Decarbonising cement and concrete production: strategies, challenges and pathways for sustainable development
8. Projecting future carbon emissions from cement production in developing countries10.1038/s41467-023-43660-x ↗
9. Optimization of thermal insulation performance of porous geopolymers under the guidance of thermal conductivity calculation10.1016/j.ceramint.2020.03.221 ↗
10. Performance and characterization of fly ash-metakaolin-based geopolymer pastes
11. A comparative study of porous geopolymers synthesized by pre-foaming and H2O2 foaming methods: strength and pore structure characteristics10.1016/j.ceramint.2024.02.270 ↗
12. Effects of intrinsic granular porosity and mineral admixtures on durability and transport properties of recycled aggregate concretes
13. Effects of Si/Al ratio on the efflorescence and properties of fly ash based geopolymer10.1016/j.jclepro.2019.118852 ↗
14. An all-in-one bio-inspired superhydrophobic coating with mechanical/chemical/physical robustness10.1016/j.colsurfa.2022.128803 ↗
15. Green development of fly ash geopolymer via casting and pressing approaches: strength, morphology, efflorescence and ecological properties10.1016/j.conbuildmat.2023.132446 ↗
16. An efficient approach for mitigation of efflorescence in fly ash-based geopolymer mortars under high-low humidity cycles10.1016/j.conbuildmat.2021.126159 ↗
17. Compressive strength development and shrinkage of alkali-activated fly ash-slag blends associated with efflorescence10.1617/s11527-015-0694-3 ↗
18. A multifunction superhydrophobic surface with excellent mechanical/chemical/physical robustness10.1016/j.colsurfa.2022.128258 ↗
19. Surface modification of geopolymer coatings with polymethylhydrosiloxane-tetraethyl orthosilicate (PMHS-TEOS) for inhibiting efflorescence10.1016/j.conbuildmat.2024.137914 ↗
20. Development of hydrophobicity in geopolymer composites-Progress and perspectives10.1016/j.conbuildmat.2023.132344 ↗
21. A superhydrophobic pulp/cellulose nanofiber (CNF) membrane via coating ZnO suspensions for multifunctional applications10.1016/j.indcrop.2022.115526 ↗
22. Inhibiting efflorescence formation on fly ash–based geopolymer via silane surface modification10.1016/j.cemconcomp.2018.08.013 ↗
23. Self-cleaning superhydrophobic fly ash geopolymer10.1038/s41598-022-27061-6 ↗
24. Superhydrophobic coatings prepared by the in situ growth of silicone nanofilaments on alkali-activated geopolymers surface10.1021/acsami.9b07990 ↗
25. Effect of hydrophobic surface-modified fine aggregates on efflorescence control in geopolymer10.1016/j.cemconcomp.2021.104337 ↗
26. Rational design and fabrication of highly transparent, flexible, and thermally stable superhydrophobic coatings from raspberry-like hollow silica nanoparticles10.1016/j.apsusc.2018.01.159 ↗
27. Mussel-inspired fabrication of superior superhydrophobic cellulose-based composite membrane for efficient oil emulsions separation, excellent anti-microbial property and simultaneous photocatalytic dye degradation10.1016/j.seppur.2022.120504 ↗
28. Functional and versatile colorful superhydrophobic nanocellulose-based membrane with high durability, high-efficiency oil/water separation and oil spill cleanup10.1016/j.surfcoat.2022.128714 ↗
29. Ministry of Industry and Information Technology of the People’s Republic of China. self-insulation foamed concrete blocks. JC/T 2550–2019. Beijing: Beijing Building Material Industry Press, 2019.
30. New Insight on improving foam stability and foam flooding using fly-ash in the presence of crude oil10.1016/j.petrol.2022.110534 ↗
31. Tailoring porosity and pore structure of cellular geopolymers for strength and thermal conductivity10.1016/j.conbuildmat.2023.132150 ↗
32. Achieving sustainable performance: synergistic effects of nano-silica and recycled expanded polystyrene in lightweight structural concrete10.1038/s41598-024-77029-x ↗
33. Effect of admixed silicone emulsion on water and chloride transport properties of concrete10.1016/j.compositesb.2024.111916 ↗
34. Effect of different silane coupling agent modified SiO2 on the properties of silicone rubber composites: based on molecular dynamics10.1016/j.colsurfa.2024.135615 ↗
35. Modelling the effective thermal conductivity and porosity of an open-cell material using an image-based technique coupled with machine learning10.1016/j.icheatmasstransfer.2024.107975 ↗
36. The impact of pore structure parameters on the thermal conductivity of porous building blocks10.1016/j.conbuildmat.2022.126681 ↗
37. Thermal conductivity analysis of high porosity structures with open and closed pores10.1016/j.ijheatmasstransfer.2021.122089 ↗
38. Quality control and assessment of geopolymer cements based on reacted and free alkalis10.1016/j.conbuildmat.2017.07.073 ↗
39. Mitigation of efflorescence for multi-componential geopolymer: influence of steel slag, flue gas desulfurization gypsum and pre-curing periods10.1016/j.jclepro.2023.136835 ↗
40. Efflorescence and subflorescence induced microstructural and mechanical evolution in fly ash-based geopolymers10.1016/j.cemconcomp.2018.06.010 ↗
41. High-performance superhydrophobic fly ash based geopolymers with graphene oxide reinforcement for enhanced durability and repellency10.1016/j.conbuildmat.2024.138944 ↗
42. Process and mechanisms of multi-stage water sorptivity in hydrophobic geopolymers incorporating polydimethylsiloxane10.1016/j.cemconcomp.2022.104460 ↗
43. Geopolymer-based radiative cooling coating: tailoring surface hydrophobic properties while retaining optical characteristics10.1016/j.conbuildmat.2024.136373 ↗
44. Study on unsaturated transport of cement-based silane sol coating materials10.3390/coatings9070427 ↗
45. Metakaolin-based geopolymer composites modified by epoxy resin and silane: mechanical properties and organic-inorganic interaction mechanism10.1016/j.clay.2022.106767 ↗
46. Superhydrophobic-superoleophilic SiC membranes with micro-nano hierarchical structures for high-efficient water-in-oil emulsion separation10.1016/j.memsci.2020.117842 ↗