Mechanical and thermal conductivity properties of alkali-resistant glass fiber shale ceramsite lightweight concrete based on microstructure
Source abstract
Abstract
In view of the difficulty for existing lightweight concrete to synergistically meet the multiple requirements of lightweight phase change energy storage concrete (LPCESC) substrates for lightweight properties, resistance to phase change material (PCM)-induced deterioration, and thermal conductivity efficiency, this study developed a new type of alkali-resistant glass fiber shale ceramsite lightweight concrete (AGFSCLC) as the LPCESC substrate. Through macroscopic performance tests, the variation laws of its dry apparent density ( ρ ), compressive strength ( f cu ), splitting tensile strength ( f ts ), and thermal conductivity were investigated. A modified model considering fiber agglomeration effect and interface failure was proposed. Scanning electron microscopy and nuclear magnetic resonance were used to analyze the microstructure, and the correlation mechanism between pore fractal dimension and macroscopic properties was revealed. The results show that when the volume content of alkali-resistant glass fiber ( V r ) is ≤ 1 %, the ρ of AGFSCLC is controlled within 1177–1459 kg/m³ , meeting the lightweight requirement of LPCESC substrates. Compared with V r = 0 %, when V r = 1 %, the f cu increases by 8.18 %-15.89 %, the specific strength increases by 2.92 %-10.36 %, and the f ts significantly increases by 36.40 %-52.87 %, indicating that the material has the ability to resist strength deterioration caused by PCM incorporation. The thermal conductivity increases by 14.05 %-14.74 %, achieving a balance between heat storage and release efficiency and thermal insulation performance. Further microscopic analysis shows that the fractal dimension of mesopores (2–50μm) and macropores (>50μm) has a linear positive correlation with the 28-day f cu (R²>0.90), confirming that the complexity of mesopore/macropore structures can be used as a key microscopic indicator to characterize macroscopic strength. This study promotes the functional upgrading of lightweight concrete from a single partition wall material to an energy storage-structure integrated material. It not only has the ability to resist strength deterioration caused by PCM, prolonging the service life of prefabricated buildings, but also meets the needs of building energy conservation under the “dual carbon” goals.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Mechanical properties and microscale changes of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials10.1016/j.cemconres.2017.07.012 ↗
2. A critical review for formulation and conceptualization of an ideal building envelope and novel sustainability framework for building applications
3. Integrating phase change materials in construction materials: Critical review10.1016/j.conbuildmat.2019.05.064 ↗
4. Review on using microencapsulated phase change materials (PCM) in building applications10.1016/j.enbuild.2015.07.019 ↗
5. Evolution of interfacial shear behavior between full lightweight ceramsite concrete and normal concrete under sulfate erosion10.1007/s43452-025-01360-x ↗
6. Dynamic mechanical behavior of ceramsite foamed concrete (CFC) with varying densities under high-velocity impact loading10.1016/j.conbuildmat.2025.143724 ↗
7. Thermal and mechanical performance of foamed concrete incorporating artificial ceramsite made from excavation soil
8. Study on the preparation and performances analysis of lightweight high strength ceramsite aerated concrete10.1016/j.jmrt.2023.07.076 ↗
9. Cracking behavior of ceramsite aerated concrete block infill wall in the coastal areas10.1186/s40069-025-00786-0 ↗
10. Evaluating the utilization of municipal solid waste incineration ash in enhancing ceramsite aerated concrete blocks10.1016/j.aej.2024.11.107 ↗
11. Predicting the total heating and cooling energy consumption with ultra high-performance fiber reinforced concrete facade panels using explainable machine learning models10.1016/j.egyr.2025.10.006 ↗
12. Study on the tensile properties and stress-strain relationship of fiber-reinforced magnesium phosphate cement-based concrete using DIC technology
13. Thermal resilience of fiber-reinforced concrete with waste ceramic aggregates and air-entraining agents: a novel approach to spalling prevention and strength retention
14. Effect of shale ceramsite type on the tensile creep of lightweight aggregate concrete10.1016/j.conbuildmat.2013.04.013 ↗
15. Experimental investigation on the compressive strength and shrinkage of concrete with pre-wetted lightweight aggregates10.1016/j.conbuildmat.2017.07.224 ↗
16. Lightweight concrete-from basics to innovations10.3390/ma13051120 ↗
17. Experimental research on the relationship between splitting tensile strength and compressive strength of ceramisite concrete
18. Mechanical and thermal properties of shale ceramsite concrete: experimental study on theinfluence law due to microencapsulated phase-change material content and phase-change cycle numbers
19. Preparation of ceramsite using dehydrated silt soil and its performance on compressive strength of ceramsite concrete block10.3390/su15119134 ↗
20. Mechanical properties and chloride salt corrosion resistance of all-lightweight shale ceramsite concrete10.3390/buildings14061684 ↗
21. Development of CO₂-ceramsite foam concrete: Mechanical properties, microstructure and environmental benefits
22. Thermal effectiveness enhancement of autoclaved aerated concrete wall with PCM-contained conical holes to reduce the cooling load10.3390/ma12132170 ↗
23. Enhancing thermal performance of autoclaved aerated concrete (AAC) incorporating sugar sediment waste and recycled AAC with phase change material-coated applications for sustainable energy conservation in building10.3390/su151914226 ↗
24. Thermal conductivity of aerated concrete (AC) composites containing micro-encapsulated phase change materials10.1051/matecconf/201928202033 ↗
25. Thermal and sound properties of concrete mixed with high porous aggregates from manufacturing waste impregnated with phase change material
26. Optimizing hybrid ratio of steel and polyethylene fibers on the compressive and tensile properties of ultra-high-strength lightweight concrete10.1016/j.conbuildmat.2025.143515 ↗
27. Mechanical and thermal properties of glass fibre-reinforced ceramsite-foamed concrete10.1177/1420326X17694421 ↗
28. Mechanical behavior of high strength concrete reinforced with glass fiber
29. Synergistic effects of polypropylene fiber and basalt fiber on the mechanical properties of concrete incorporating fly ash ceramsite after freeze-thaw cycles
30. A study on the mechanical and economic performance comparison of ceramsite concrete based on fiber selection and optimization10.1038/s41598-024-83480-7 ↗
31. GB/T 17431.2-2010 · 2010
32. Strain-hardening fiber reinforced polymer concrete with a low carbon footprint10.1016/j.conbuildmat.2021.125705 ↗
33. GB/T, 50081-2019 · 2019
34. Grey model research based on the pore structure fractal and strength of NMR aeolian sand lightweight aggregate concrete10.1007/s11837-019-03887-w ↗
35. JG/T 169-2016 · 2016
36. The effect of different parameters on the development of compressive strength of oil palm shell geopolymer concrete10.1155/2014/898536 ↗
37. Mechanical properties and failure mechanism of fiber-reinforced concrete materials: Effects of fiber type and content10.1016/j.conbuildmat.2025.140190 ↗
38. Thermal insulation performance of rock wool reinforced kaolinite-based porous geopolymer10.1016/j.clay.2023.107176 ↗
39. Effect of glass fiber on the mechanical and thermal insulation performances of kaolinite-based thermal insulator
40. Preparation, characterization, and analysis of wollastonite-enhanced kaolinite-based porous geopolymer and its reinforcing mechanism10.1016/j.conbuildmat.2025.144536 ↗
41. Utilizing carbonated recycled concrete fines to develop sustainable ultra-high-performance fiber-reinforced concrete
42. Influence of microstructure on fluid transport and mechanical properties in structural concrete produced with lightweight clay aggregates10.1016/j.conbuildmat.2018.03.135 ↗
43. Effects of particle characteristics of lightweight aggregate on mechanical properties of lightweight aggregate concrete10.1016/j.conbuildmat.2014.07.043 ↗
44. Pore size distributions and fractal characteristics of basalt fiber-reinforced coral sand concrete