Fatigue behavior of the reinforced concrete slab-track
Source abstract
Abstract
This study quantifies the static and high-cycle fatigue performance of non-prestressed reinforced concrete slab-track panels developed as locally optimized variants of the CRTS III system for high-speed rail. Two full-scale designs were tested: NC1, a uniform 250 mm slab with a tensile reinforcement ratio of 1.584%, and NC2, a tapered 210–250 mm slab with a reinforcement ratio of 1.453%. Three-point bending tests with up to 2 × 1 0 6 sinusoidal load cycles, digital image correlation, and embedded strain measurements were used to monitor crack initiation, stiffness degradation, and deflection. NC1 retained higher stiffness, smaller stabilized crack widths, and lower mid-span deflections, while NC2 developed a more uniform but wider crack pattern and higher curvature. Both designs showed early crack acceleration, and flexural behavior governed failure after fatigue. A calibrated 3D nonlinear finite element model with a plasticity–fracture formulation reproduced load–deflection responses, crack localization, and fatigue degradation with minor post-peak deviations. The results demonstrate a trade-off: thicker, higher-reinforcement slabs improve fatigue resilience and serviceability, whereas tapered, lower-reinforcement slabs reduce material use but require stricter crack-width control. • Comparative full-scale fatigue testing of two optimized reinforced concrete slab-track designs. • NC1 (thicker, higher reinforcement) showed 47% narrower cracks and higher stiffness. • NC2 (tapered, lower reinforcement) achieved 86% of NC1’s capacity with less material. • A calibrated finite element model accurately captured crack localization and fatigue degradation. • Clear design trade-off identified: fatigue resilience (NC1) vs. material efficiency (NC2).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Railway Engineering and Dynamics · Innovative concrete reinforcement materials · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Associated Press · 2023
2. Recent developments in high-speed railway in Indonesia: Superstructure construction and track infrastructure10.1016/j.trip.2025.101385 ↗
3. Experimental study on evolution of mechanical properties of CRTS III ballastless slab track under fatigue load10.1016/j.conbuildmat.2019.03.080 ↗
4. An analytical solution for the geometry of high-speed railway CRTS III slab track on simply supported bridges10.3390/math10183306 ↗
5. fib · 2019
6. Dynamic performance of a slab track–concrete box subgrade under high-speed train loads
7. Serviceability assessment of fatigued reinforced concrete structures using a dynamic response technique10.1016/j.jmrt.2020.02.070 ↗
8. Mechanical characteristic variation of ballastless track in high-speed railway: Effect of train–track interaction and environment loads10.1007/s40534-020-00227-6 ↗
9. Study on fatigue damage laws and life prediction of CRTS-II ballastless track slab10.1016/j.engstruct.2021.113659 ↗
10. Fatigue performance of orthogonally reinforced concrete slabs: Experimental investigation10.1016/j.engstruct.2018.04.058 ↗
11. A numerical study on the fatigue life design of concrete slabs for railway tracks10.1016/j.engstruct.2015.06.037 ↗
12. Research on the fatigue performance of self-compacting concrete structure in CRTSIII slab ballastless track under the action of heavy haul train
13. Experimental study on fatigue damage of self-compacting concrete of CRTS III slab track10.1016/j.istruc.2023.04.066 ↗
14. Investigating the fatigue performance of conventional reinforced concrete CRTS III ballastless track structures using a fatigue damage constitutive model10.1016/j.engstruct.2024.117504 ↗
15. Fatigue behavior of ballastless track concrete in high-speed railways under different operating speeds
16. Development of a new high-speed train load model for dynamic calculation of railway bridges10.1002/cepa.2210 ↗
17. Andersson · 2020
18. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
19. Fatigue damage prognosis of steel bridges under traffic loading using a time-based crack growth method10.1016/j.engstruct.2021.112162 ↗
20. Experimental study of the fatigue behavior of high strength concrete10.1016/0008-8846(96)00151-2 ↗
21. Experimental study and analytical modeling on fatigue properties of pervious concrete made with natural and recycled aggregates10.1186/s40069-018-0305-0 ↗
22. Influence of loading sequence on low cycle fatigue behavior of normal weight concrete under direct tension10.1520/JTE20180348 ↗
23. Fatigue behaviour of plain and reinforced concrete: A systematic review10.1016/j.tafmec.2023.103867 ↗
24. Fatigue performance and damage of partially prestressed concrete beam with fiber reinforcement
25. Experimental and reliability analyses for fatigue-induced damage in reinforced concrete trough bridges
26. 2023
27. Flatness warping of CRTS III track slabs during curing phase10.1016/j.conbuildmat.2024.137311 ↗
28. for Structural Concrete (fib) · 2013
29. ASTM International · 2021
30. ASTM International · 2015
31. ASTM International · 2023
32. ASTM International · 2023
33. ASTM International · 2023
34. European Committee for Standardization · 2016
35. Long-term prediction of fatigue crack growth in ballastless track of high-speed railway due to cyclic train load10.1016/j.conbuildmat.2021.123375 ↗
36. Mumtazul Azwa Jaya, Indra Komara, Kivanc Taşkın, Pannadipa Putera Sukmajaya, Feriscilla Siti Misilia, Intan Rismayanti, Application of Digital Image Correlation in Analyzing Functionally Graded Cement-Based Concrete-Layered Materials for Structural Retrofitting, in: IOP Conference Series: Earth and Environmental Science, Vol. 1431, 2024, http://dx.doi.org/10.1088/1755-1315/1431/1/012003.10.1088/1755-1315/1431/1/012003 ↗
37. Ncorr: Open-source 2D digital image correlation MATLAB software10.1007/s11340-015-0009-1 ↗
38. A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack10.1016/j.engstruct.2017.12.004 ↗
39. Effect of member depth and concrete strength on shear strength of RC deep beams without transverse reinforcement10.1016/j.engstruct.2021.112427 ↗
40. Experimental study on post-peak cyclic characteristics of self-compacting concrete combined with AE and DIC techniques10.3151/jact.18.386 ↗
41. Fatigue behavior of steel-fiber-reinforced concrete beams10.1061/(ASCE)ST.1943-541X.0001074 ↗
42. CEN · 2004
43. CEN · 2017
44. Optimisation of slab track design considering dynamic train–track interaction and environmental impact10.1016/j.engstruct.2021.113749 ↗
45. CEA/DEN · 2023
46. Ayachit · 2015
47. 36-ParaView: An end-user tool for large-data visualization
48. Modeling cover spalling behavior in high-strength reinforced concrete columns using a plasticity–Fracture model10.1016/j.engstruct.2019.109336 ↗
49. 3D finite-element modelling of circular reinforced concrete columns confined with FRP using a plasticity-based formulation10.1016/j.compstruct.2018.04.039 ↗
50. Plasticity constitutive model for stress–Strain relationship of confined concrete
51. A stress–strain model for uniaxial and confined concrete under compression10.1016/j.engstruct.2012.03.027 ↗
52. Embedding of reinforcement in reinforced concrete elements implemented in DENA10.1016/0045-7949(91)90322-D ↗
53. Mathematical formulation of embedded reinforcements in 3D brick elements10.1002/(SICI)1099-0887(199612)12:12<897::AID-CNM981>3.0.CO;2-D ↗