Sustainable ultra-high-performance basalt fiber-reinforced geopolymer concrete incorporating carbon nanotubes and treated recycled aggregates
Source abstract
Abstract
In this study, the performance characteristics of ultra-high-performance geopolymer concrete (UHPGC) incorporating basalt fibers and carbon nanotubes (CNTs) synthesized from waste polypropylene using kaolin as a catalyst were investigated. Recycled aggregates treated with calcium silicate hydrate (CSH) were also considered. The experimental program focused on the workability, mechanical properties, and durability of basalt fiber- and CSH-based geopolymer concrete with CNT dosages of 0.05%, 0.1%, and 0.15%. Furthermore, the performance of untreated and treated recycled aggregates was analyzed. The CNTs significantly improved compressive strength specially at 0.05% CNT dosage achieving the best performance. The combined effects of CNTs, basalt fibers, and CSH treatment improved the mechanical properties and durability of UHPGC. The treated recycled aggregates improved the interfacial transition zone, internal curing, and compressive strength of UHPGC. The sulfate resistance of UHPGC was tested at varying concentrations and durations. The best performance was achieved for the 0.05% CNT mix, particularly when combined with treated aggregates. The high-temperature resistance of UHPGC was evaluated at 200, 400, 600, 800, and 1000 °C. Silicate treatment improved the strength and thermal stability of UHPGC. Microstructural analysis supported these results, showing that the UHPGC matrix was more densely packed with the incorporated CNTs and basalt fibers. This study demonstrates the potential of using waste-derived CNTs, basalt fibers, and treated recycled aggregates to produce UHPGC suitable for the construction and infrastructure industries.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation10.1016/j.conbuildmat.2021.124887 ↗
2. Effect of cement dosage and waste tire rubber on the mechanical, transport and abrasion characteristics of foam concretes subjected to H2SO4 and freeze–thaw10.1016/j.conbuildmat.2021.124229 ↗
3. Physico-chemical properties of Kenyan made calcined clay-limestone cement (LC3)
4. Influence of bottom ash replacements as fine aggregate on the property of cellular concrete with various foam contents
5. High strength flowable lightweight concrete incorporating low C3A cement, silica fume, stalite and macro-polyfelin polymer fibres10.1016/j.conbuildmat.2021.122410 ↗
6. Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete10.1016/j.conbuildmat.2016.05.076 ↗
7. Global CO 2 emissions from cement production, 1928–201810.5194/essd-11-1675-2019 ↗
8. Multicriteria performance assessment of ‘low w/c+ low cement+ high dosage admixture’Concrete: environmental, economic, durability, and mechanical performance considerations10.1016/j.jclepro.2025.146419 ↗
9. Performance of geopolymer concrete containing recycled rubber10.1016/j.conbuildmat.2019.02.121 ↗
10. Mechanical properties of semi-lightweight concrete containing nano-palm oil clinker powder10.1016/j.pce.2021.102977 ↗
11. Evaluation of using cement in alkali-activated slag concrete
12. A. Al Fahim, S.J.S. Bukhari, M.K.J.C. Moradllo, B. Materials, Additive manufacturing of carbonatable ternary cementitious systems with cellulose nanocrystals, 495, 2025, 143753.10.1016/j.conbuildmat.2025.143753 ↗
13. Physico-mechanical, thermal properties and durability of foamed geopolymer concrete containing cenospheres10.1016/j.conbuildmat.2022.126841 ↗
14. Application of low-cement+ high dosage HRWR admixture concrete (Prepublished)
15. Next-generation ultra high performance geopolymer concrete: optimizing calcium aluminate cement clinker and nano rice husk ash for mechanical strength, durability and thermal resistance
16. Alkali-activated fly ashes: a cement for the future10.1016/S0008-8846(98)00243-9 ↗
17. Effect of nano-silica on strength and durability of fly ash based geopolymer mortar10.1016/j.conbuildmat.2014.07.093 ↗
18. Novel use of fava bean stalk ash in ultra-high-performance geopolymer concrete: a sustainable approach to improving strength and durability10.1016/j.jobe.2025.114163 ↗
19. J.L. Provis, J.S.J. Van DeventerAlkali activated materials: state-of-the-art report, RILEM TC 224-AAM, Springer Science & Business Media 2013.10.1007/978-94-007-7672-2 ↗
20. Formulation and characterization of geopolymer and conventional lightweight green concrete by incorporating synthetic lightweight aggregate
21. Evaluating the performance of internally cured limestone calcined clay concrete mixtures
22. Assessing some durability properties of sustainable lightweight oil palm shell concrete incorporating slag and manufactured sand10.1016/j.jclepro.2015.06.122 ↗
23. Thermal insulation performance evaluation of autoclaved aerated concrete panels and sandwich panels based on temperature fields: experiments and simulations10.1016/j.conbuildmat.2021.124560 ↗
24. Comparison of thermal insulation performance of vacuum insulation panels with EPS protection layers measured with different methods10.1016/j.enbuild.2021.110771 ↗
25. A novel building material with low thermal conductivity: rapid synthesis of foam concrete reinforced silica aerogel and energy performance simulation10.1016/j.enbuild.2018.08.014 ↗
26. Performance properties of structural fibred-foamed concrete10.1016/j.rineng.2019.100092 ↗
27. D. Adak, M. Sarkar, S.J.C. Mandal, B. Materials, Effect of nano-silica on strength and durability of fly ash based geopolymer mortar, 70, 2014. pp. 453-459.10.1016/j.conbuildmat.2014.07.093 ↗
28. Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA–
29. A.M.J.C. Rashad, B. MaterialsAlkali-activated metakaolin: a short guide for civil engineer–an overview, 41, 2013, pp. 751-765..10.1016/j.conbuildmat.2012.12.030 ↗
30. M. Eltaher, M. Khater, S. Park, E. Abdel-Rahman, M.J.Ainr Yavuz, On the static stability of nonlocal nanobeams using higher-order beam theories, 4(1) 2016. 51.10.12989/anr.2016.4.1.051 ↗
31. High quality and maximizing the production of CNTs from the pyrolysis of waste polypropylene10.1007/s13369-022-07206-5 ↗
32. Very ductile polymer concrete using carbon nanotubes10.1016/j.conbuildmat.2018.11.021 ↗
33. M.S. Konsta-Gdoutos, Z.S. Metaxa, S.P.J.C. ShahHighly dispersed carbon nanotube reinforced cement based materials, 40(7), 2010. 1052-1059..10.1016/j.cemconres.2010.02.015 ↗
34. T. Manzur, N.J.Trr Yazdani, Strength enhancement of cement mortar with carbon nanotubes: early results and potential, 2142(1) 2010. pp. 102-108.10.3141/2142-15 ↗
35. H. Saleem, S.J. Zaidi, N.A.J.M. Alnuaimi, Recent advancements in the nanomaterial application in concrete and its ecological impact, 14(21) 2021. 6387.10.3390/ma14216387 ↗
36. R. Siddique, A.J.C. Mehta, B. Materials, Effect of carbon nanotubes on properties of cement mortars, 50 2014. pp. 116-129.10.1016/j.conbuildmat.2013.09.019 ↗
37. W. Sekkal, A.J.C. Zaoui, B. Materials, Unveiling the high strength and ductile character of reinforced CNT/geopolymer paste subjected to elevated temperatures, 442 2024. 137608.10.1016/j.conbuildmat.2024.137608 ↗
38. W. Sekkal, A.J.C. Zaoui, B. Materials, High strength metakaolin-based geopolymer reinforced by pristine and covalent functionalized carbon nanotubes, 327 2022. 126910.10.1016/j.conbuildmat.2022.126910 ↗
39. V. Vaganov, M. Popov, A. Korjakins, G. Šahmenko, Effect of CNT on microstructure and minearological composition of lightweight concrete with granulated foam glass, 2017.10.1016/j.proeng.2017.02.141 ↗
40. M.O. Mohsen, N. Al-Nuaimi, R.K.A. Al-Rub, A. Senouci, K.A.J.C. Bani-Hani, B. Materials, Effect of mixing duration on flexural strength of multi walled carbon nanotubes cementitious composites, 126 2016. pp. 586-598.10.1016/j.conbuildmat.2016.09.073 ↗
41. Effect of recycled aggregate treatment using fly ash, palm leaf ash, and silica fume slurries on the mechanical and transport properties of high-strength concrete10.1016/j.jobe.2025.113292 ↗
42. A. ASTM C618, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, ASTM international 2019.
43. A. C1240-20, Standard Specification for Silica Fume Used in Cementitious Mixtures, ASTM Stand. 2020.
44. Improvement on the properties of waste glass mortar with nanomaterials10.1016/j.conbuildmat.2020.118973 ↗
45. M.O. Yusuf, K.A.A. Al-Sodani, A.H. AlAteah, M.M. Al-Tholaia, A.A. Adewumi, A.O. Bakare, A.K. Usman, I.J.A.S. Momohjimoh, Performances of the synergy of silica fume and waste glass powder in ternary blended concrete, 12(13) 2022. 6637.10.3390/app12136637 ↗
46. ASTM C33-03. Standard specification for concrete aggregates. American Society for Testing and Materials. West Conshohocken, PA: ASTM International; 2010.
47. EN 933-11: Tests for geometrical properties of aggregates - Part 11: CLassification Test for the Constituents of Coarse Recycled Aggregate, European Standard, 2009.
48. A review on different treatment methods for enhancing the properties of recycled aggregates for sustainable construction materials10.1016/j.conbuildmat.2019.117894 ↗
49. F. Almohammed, M. Thakur, D. Lee, R. Kumar, T.J.C. Singh, B. Materials, Flexural and split tensile strength of concrete with basalt fiber: An experimental and computational analysis, 414 2024. 134936.10.1016/j.conbuildmat.2024.134936 ↗
50. Impact of basalt fiber reinforced concrete in protected buildings: a review10.3389/fbuil.2024.1407327 ↗
51. B. EN, 934-2: 2001: Admixtures for concrete, mortar and grout–Part 2: concrete admixtures–definitions, requirements, conformity, marking and labelling, Turkish Standards Institution 2013.
52. Developing a simple catalytic pyrolysis unit for domestic use
53. Energy consumption analysis in the plastic waste recycling process: a case study of Amazia Vision Enterprise Private Limited
54. Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst10.1016/j.wasman.2024.08.005 ↗
55. A. Aliyu, A.S. Abdulkareem, A.S. Kovo, O.K. Abubakre, J.O. Tijani, I. Kariim, Synthesize multi-walled carbon nanotubes via catalytic chemical vapour deposition method on Fe-Ni bimetallic catalyst supported on kaolin, 2017.10.5714/CL.2017.21.033 ↗
56. Thermoelectric cement-based composites containing carbon nanotubes (CNTs): effects of water-to-cement ratio and CNT dosage
57. R. Piao, Z. Cui, J.-W. Jeong, D.-Y.J.C. Yoo, B. Materials, Optimal multi-walled carbon nanotube dosage for improving the mechanical and thermoelectric characteristics of ultra-high-performance fiber-reinforced concrete, 462 2025. 139927.10.1016/j.conbuildmat.2025.139927 ↗
58. ASTM C469 · 2002
59. Standard test method for flexural strength of concrete (using simple beam with third-point loading)
60. ASTM C469 · 2002
61. ASTM C1585-13 · 2013
62. Sulfate and acid resistance of lithomarge-based geopolymer mortars10.1016/j.conbuildmat.2018.01.129 ↗
63. Resistance of soda residue-fly ash based geopolymer mortar to acid and sulfate environments10.3390/ma14040785 ↗
64. BS EN 12390-3 · 2011
65. S. He, J. Chai, J. Cao, Y. Qin, Z. Xu, Y. Yang, F.J.C. Wei, B. Materials, Evolution of concrete properties driven by CNTs content: PCA-based optimal content evaluation, 492 2025. 143058.10.1016/j.conbuildmat.2025.143058 ↗
66. Back to basics: nanomodulating calcium silicate hydrate gels to mitigate CO2 footprint of concrete industry10.1016/j.jclepro.2023.139921 ↗
67. Influence of retarders on the performance of slag-silica fume based ultra-high-performance geopolymer concrete10.1016/j.jobe.2025.113891 ↗
68. W. Sekkal, A.J.S.C. Zaoui, Residual water and interfacial bonding effects on the mechanical performance of CNT/fly ash geopolymer binder, 25(5) (2024) 3648-3661.10.1002/suco.202301055 ↗
69. M. Khan, J. Lao, M.R. Ahmad, J.-G.J.C. Dai, B. Materials, Enhancing mechanical and thermal performance of ultra-high-performance calcium aluminate cement concrete (UHP-CACC) using hybrid steel-basalt fibers, 476 2025. 141313.10.1016/j.conbuildmat.2025.141313 ↗
70. R. Hari, Y.J.C. Zhuge, B. Materials, Performance assessment of pervious concrete incorporated with calcium silicate hydrates (CSH) cultivated on rice husk ash substrates–A trend surface analysis interpretation, 446 2024. 138050.10.1016/j.conbuildmat.2024.138050 ↗
71. M. Khan, M. Cao, A. Hussain, S.J.C. Chu, B. Materials, Effect of silica-fume content on performance of CaCO3 whisker and basalt fiber at matrix interface in cement-based composites, 300 2021. 124046.10.1016/j.conbuildmat.2021.124046 ↗
72. Influence of nanomaterials on properties and durability of ultra-high-performance geopolymer concrete10.1515/rams-2024-0071 ↗
73. H. Kim, H. Son, H.-K.J.Fc. Lee, structures, Review on recent advances in securing the long-term durability of calcium aluminate cement (CAC)-based systems, 3(3) 2021. 035002.10.1088/2631-6331/ac1913 ↗
74. M.S. Kırgız, J. Khatib, R.D. Campilho, A. Elahi, A. Ashteyat, R.A. Gonzalez-Lezcano, T. Tahenni, G. Bamigboye, N. Nagaprasad, K.J.S.R. Ramaswamy, Modification mechanism of silver nanoparticles-functionalized MW-CNT and GGBFS and CQDs on the structural properties of geopolymer reinforced-composite beam, 15(1) 2025. 27997.10.1038/s41598-025-08910-6 ↗
75. Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber10.1016/j.conbuildmat.2018.11.181 ↗
76. Synthesis and characterization of low cost nanosilica from sodium silicate solution and their applications in ceramic engobes10.1016/j.bsecv.2019.06.004 ↗
77. Experimental study on mechanical properties and durability of basalt fiber reinforced coral aggregate concrete10.1016/j.conbuildmat.2019.117628 ↗
78. Cracking behaviour and constitutive modelling of hybrid fibre reinforced concrete10.1016/j.jobe.2020.101272 ↗
79. N.D.K.R. Chukka, B.S. Reddy, K. Vasugi, Y.B.S. Reddy, L. Natrayan, S.J.A.S. Thanappan, Technology, Experimental testing on mechanical, durability, and adsorption dispersion properties of concrete with multiwalled carbon nanotubes and silica fumes, 2022 2022. 4347753.10.1155/2022/4347753 ↗
80. Functionalization of carbon nanotubes for enhanced dispersion and improved properties of geopolymer concrete: a review10.1016/j.jobe.2025.113096 ↗
81. N. Buettner, G. Iyacu, A.-T.J.C. Akono, C. Research, Colloidal nanosilica promotes high-density calcium-silicate-hydrates in fine recycled concrete aggregate mortar, 180 2024. 107498.10.1016/j.cemconres.2024.107498 ↗
82. Influence of recycled aggregates and carbon nanofibres on properties of ultra-high-performance concrete under elevated temperatures
83. The influence of molarity activity on the green and mechanical properties of geopolymer concrete
84. Pozzolanic reactivity and strength activity index of mortar containing palm oil clinker pretreated with hydrochloric acid10.1016/j.jclepro.2019.118565 ↗
85. Z. Sun, Y. Li, Y. Yang, L. Su, S.J.C. Xie, B. Materials, Splitting tensile strength of basalt fiber reinforced coral aggregate concrete: Optimized XGBoost models and experimental validation, 416 2024. 135133.10.1016/j.conbuildmat.2024.135133 ↗
86. M. Khan, M. Cao, X. Chaopeng, M.J.F. Ali, Materials, Experimental and analytical study of hybrid fiber reinforced concrete prepared with basalt fiber under high temperature, 46(1) 2022. pp. 205-226.10.1002/fam.2968 ↗
87. Effectiveness of hybrid steel-basalt fiber reinforced concrete under compression
88. M. Khan, J. Lao, M.R. Ahmad, J.-G.J.C. Dai, B. Materials, Influence of high temperatures on the mechanical and microstructural properties of hybrid steel-basalt fibers based ultra-high-performance concrete (UHPC), 411 2024. 134387.10.1016/j.conbuildmat.2023.134387 ↗
89. X. Yuan, W. Xu, A.H. AlAteah, S.A.J.C. Mostafa, B. Materials, Evaluation of the performance of high-strength geopolymer concrete prepared with recycled coarse aggregate containing eggshell powder and rice husk ash cured at different curing regimes, 434 2024. 136722.10.1016/j.conbuildmat.2024.136722 ↗
90. M. Cao, X. Ming, K. He, L. Li, S.J.M. Shen, Effect of macro-, micro-and nano-calcium carbonate on properties of cementitious composites-A review, 12(5) 2019. 781.10.3390/ma12050781 ↗
91. Packing density of mortar containing polypropylene, carbon or basalt fibres under dry and wet conditions10.1016/j.powtec.2018.10.005 ↗
92. S. Chai, J. Song, M. Wang, Y. Zhang, B.-T. Huang, B. Yin, P. Wang, D.J.C. Hou, C. Research, Freezing behavior of ionic solutions within calcium silicate hydrate gel pores, 192 2025. 107841.10.1016/j.cemconres.2025.107841 ↗
93. T. Zhang, K. Wang, B. Lin, Y.J.C. Yao, B. Materials, The enhancement mechanism of modified basalt fiber on the performance of geopolymer concrete, 417 2024. 135123.10.1016/j.conbuildmat.2024.135123 ↗
94. Development of ultra high-performance concrete with artificial aggregates from sesame ash and waste glass: a study on mechanical strength and durability10.3390/buildings15111942 ↗
95. Y. Zhang, S. Cao, J. Chang, S. Ding, Q. Zhao, C.S.J.C. Poon, C. Composites, Influence of seawater on the microstructure of calcium-silicate-hydrate (CSH) gels with varying Ca/Si ratios based on alite-silicon dioxide system, 2025. 106251.10.1016/j.cemconcomp.2025.106251 ↗
96. Y. Li, P. Pan, S. Miao, Y.J.C. Feng, B. Materials, Basalt fiber reinforcement mechanism for geopolymer exposed to lunar temperature environment, 451 2024. 138845.10.1016/j.conbuildmat.2024.138845 ↗
97. M. Khan, J. Lao, M.R. Ahmad, M.-F. Kai, J.-G.J.C. Dai, B. Materials, The role of calcium aluminate cement in developing an efficient ultra-high performance concrete resistant to explosive spalling under high temperatures, 384 2023. 131469.10.1016/j.conbuildmat.2023.131469 ↗
98. Hydration behavior of calcium aluminate cement mortars with mineral admixtures at different curing temperatures10.1016/j.conbuildmat.2021.122839 ↗
99. Heating-induced transformations in calcium silicate hydrate (CSH): In-situ investigations of composition
100. Effects of CNTs/PVA on concrete performance: strength, drying shrinkage