Preparation of CO2 sequestration materials from semi-dry carbonized carbide slag and coal gasification slag: Study on carbon fixation performance of multistage carbonation
Source abstract
Abstract
In order to solve the problems of coal-based solid waste disposal and carbon emission reduction, this study used carbide slag (CS) and coal gasification slag (CGS) as raw materials to prepare CO 2 storage materials (CSGS-CO 2 ) with low cost and high carbon fixation performance by a semi-dry carbonation process, and systematically explored its mineralization mechanism and carbon fixation characteristics. The effects of carbonation stage, CS content and curing age on the properties of the materials were analyzed by X-ray diffraction (XRD), thermogravimetric analysis (TG-DTG), scanning electron microscopy (SEM), infrared spectroscopy (FTIR) and mercury intrusion (MIP). The study found that, (1) The carbon fixation rate of CSGS-CO₂ gradually increased with the increase of CS content, reaching a maximum of 38.86 %. However, the mineralization efficiency of CSGS-CO 2 showed a trend of first increasing and then decreasing as the CS content rose. When the CS content was 90 % and the CGS content was 10 %, the mineralization efficiency reached the maximum value of 53.36 % (under 14-day single-stage carbonation). (2) Although the stirring carbonation treatment in double-stage carbonation improved the carbon fixation rate in the early stage of curing (an increase of 11.98 % at 1 d), due to the formation of a dense product layer and the pore backfilling effect, the carbon fixation rate and mineralization efficiency at 14 d were both 23.31 % lower than those of single-stage carbonation. Therefore, for scenarios such as mine backfilling that require long-term stable carbon fixation, single-stage carbonation, with higher total carbon fixation amount and mineralization efficiency, is more applicable. (3) Microstructural analysis indicated that the main product of the carbonation reaction is calcite-type calcium carbonate. Single-stage carbonation led to the formation of a stacked structure of the calcite generated by the carbonation reaction, whereas in the double-stage carbonation samples, the calcite crystals produced exhibited an overall random scattered distribution due to the stirring shear effect. (4) The carbonation stirring process in double-stage carbonation significantly reduced the porosity of the samples, resulting in the blockage of CO 2 diffusion channels during the later stage of carbonation curing. In contrast, the porous characteristics of CGS can optimize the pore structure, providing channels for CO 2 transport. This is conducive to enhancing the long-term stability and air tightness of the material, thereby supporting its application as a CO 2 sequestration material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: CO2 Sequestration and Geologic Interactions · Concrete and Cement Materials Research · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Impact of globalization and energy consumption on CO2 emissions in China: implications for energy transition[J]10.1016/j.frl.2024.105939 ↗
2. Interannual extremes in the rate of rise of atmospheric carbon dioxide since 1980[J]10.1038/375666a0 ↗
3. The effect of greenhouse gases on Earth’s Temperature
4. Global carbon emissions in 202310.1038/s43017-024-00532-2 ↗
5. Worldwide status of CCUS technologies and their development and challenges in China
6. In-situ remediation of phosphogypsum in a cement-free pathway: utilization of ground granulated blast furnace slag and NaOH pretreatment10.1016/j.chemosphere.2022.137412 ↗
7. CO2 sequestration characteristics in the cementitious material based on gangue backfilling mining method10.1016/j.ijmst.2019.03.005 ↗
8. Progress in research of CO2 fixation and sequestration by coal mine solid waste mineralization and co-disposal of pollution and carbon reduction
9. Research progress and prospect of coal based solid waste backfilling mining technology
10. Mechanical properties and damage characteristics of Coal-Based solid waste paste filling materials with different moisture content
11. Advances in recovery and utilization of carbon dioxide: a brief Review10.1016/j.jece.2021.105644 ↗
12. CCUS scenarios for the cement industry: is CO2 utilization feasible?10.1016/j.jcou.2022.102015 ↗
13. Mohamed A.-M.O., El Gamal M., Hameedi S.M., et al. Chapter 2 - Carbon capture and utilization[M]//MOHAMED A-M O, EL GAMAL M, HAMEEDI S M, et al. Sustainable Utilization of Carbon Dioxide in Waste Management. Elsevier, 2023: 67-113.10.1016/B978-0-12-823418-1.00001-9 ↗
14. Carbonation curing for wollastonite-Portland cementitious materials: CO2 sequestration potential and feasibility assessment10.1016/j.jclepro.2018.11.215 ↗
15. Preparation and carbonation hardening of low calcium CO2 sequestration materials from waste concrete powder and calcium carbide slag10.1016/j.cemconcomp.2023.105151 ↗
16. CO2 storage-cavern construction and storage method based on functional backfill
17. Influence of carbonation on the volume change of hardened cement pastes10.1016/j.conbuildmat.2020.119709 ↗
18. Carbonation behavior of hydraulic and non-hydraulic calcium silicates: potential of utilizing low-lime calcium silicates in cement-based materials10.1007/s10853-016-9909-4 ↗
19. Study on high-efficiency CO2 absorption by fresh cement paste10.1016/j.conbuildmat.2020.121364 ↗
20. Study on carbon sequestration and CO2 mixing of fresh cement mortar
21. Research on the mechanical properties and microstructure of low-carbon ultra-high performance concrete using carbonated recycled fine aggregate10.1016/j.conbuildmat.2025.142762 ↗
22. Utilizing carbonated recycled concrete fines to develop sustainable ultra-high-performance fiber-reinforced concrete
23. Fluorides immobilization through calcium aluminate cement-based backfill: accessing the detailed leaching characterization under torrential rainfall10.1016/j.envres.2023.117229 ↗
24. Early opportunities for onshore and offshore CCUS deployment in the Chinese cement Industry10.1016/j.eng.2024.09.011 ↗
25. Assessment of CO2 storage potential and carbon capture, utilization and storage prospect in China10.1016/j.joei.2017.08.002 ↗
26. Exploration of the basic theory and application of functional filling in Mines
27. Study on mechanical properties and toughness characteristics of fiber reinforced storage backfill after carbonation curing10.1016/j.istruc.2025.108996 ↗
28. Research progress on the characteristics and comprehensive utilization of calcium carbide Slag
29. Evaluation of dioxins and dioxin-like compounds from a cement plant using carbide slag from chlor-alkali industry as the major raw material10.1016/j.jhazmat.2017.02.018 ↗
30. Simultaneous CO2 capture and thermochemical heat storage by modified carbide slag in coupled calcium looping and CaO/Ca(OH)2 cycles10.1016/j.cjche.2020.09.026 ↗
31. Progress in the resource utilization of calcium carbide slag
32. Carbon Dioxide-fixing and compression strength enhancing characteristics of mineralized immobilization of Fly Ash-Calcium carbide slag slurry
33. Optimizing carbonation reaction parameters of calcium carbide slag in acidic/alkaline environment enhancing CO2 mineralization efficiency10.1016/j.cej.2024.155587 ↗
34. Integration of CO2 sequestration with the resource recovery of red mud and carbide slag10.1016/j.seppur.2024.129428 ↗
35. Effect of carbon capture on carbide slag-steel slag shape-stable phase change materials for thermal energy storage10.1016/j.renene.2024.121251 ↗
36. Preliminary exploration of the hydration-carbonation coupling mechanism of low-carbon calcined clay-carbide slag-cement composites10.1016/j.jcou.2024.102876 ↗
37. Effects of calcium carbide slag on properties and carbon sequestration efficiency of cement pastes mixed under direct CO2 injection conditions10.1016/j.jcou.2024.102835 ↗
38. Mechanism analysis of carbide slag capture of CO2 via a gas-liquid-solid three-phase fluidization system10.1016/j.jclepro.2020.123712 ↗
39. Review on resource utilization of coal gasification slag
40. Review on characteristics and resource utilization of coal gasification coarse slag
41. Characterisation of residual carbon from entrained-bed coal water slurry gasifiers10.1016/j.fuel.2006.09.033 ↗
42. Mineral carbonation of CO2 with utilization of coal gasification slags based on chemical looping10.1002/apj.2636 ↗
43. Study on the impact of using decarbonized gasification slag for CO2 mineralization and storage to prepare calcium carbonate
44. Study on distribution, chemical states and binding energy shifts of elements on the surface of gasification fine ash10.1007/s11164-019-03824-1 ↗
45. Characterisation of residual carbon from entrained-bed coal water slurry gasifiers10.1016/j.fuel.2006.09.033 ↗
46. Preparation of hierarchically porous carbon ash composite material from fine slag of coal gasification and ash slag of biomass combustion for CO2 capture10.1016/j.seppur.2023.125452 ↗
47. Insight into the synergism of residual carbon and slag particles in coal gasification fine slag on porous composites preparation for CO2 capture10.1016/j.seppur.2024.126540 ↗
48. Production of low-carbon composite materials using magnesium slag and coal gasification slag via CO2 curing10.1016/j.conbuildmat.2025.140003 ↗
49. Performance study of modified magnesium-coal based solid waste negative carbon backfill material: strength characteristics and carbon fixation efficiency
50. A backfill material without cementitious material: carbonation curing magnesium slag based full solid waste backfill material10.1007/s11771-024-5635-2 ↗
51. Upcycling carbon dioxide to improve mechanical strength of portland cement10.1016/j.jclepro.2018.06.120 ↗
52. Accelerated carbonation of portland limestone cement10.1061/(ASCE)MT.1943-5533.0000773 ↗
53. Comparison on accelerated carbonation of β-C2S, ca (OH) 2, and C4AF: reaction degree, multi-properties, and products10.1016/j.conbuildmat.2019.07.056 ↗
54. Integrated CO2 fixation, waste stabilization, and product utilization via high-gravity carbonation process exemplified by circular fluidized bed Fly ash10.1021/acssuschemeng.6b00014 ↗
55. Properties of coal gangue-Portland cement mixture with carbonation10.1016/j.fuel.2019.02.067 ↗
56. Synergistic mechanisms of steelmaking slag coupled with carbide slag for CO2 mineralization10.1016/j.ijggc.2020.103229 ↗
57. Particle morphology, habit, and size control of CaCO3 using reverse microemulsion technique10.1016/j.ces.2008.04.022 ↗
58. The kinetics and mechanisms of amorphous calcium carbonate (ACC) crystallization to calcite, via vaterite10.1039/C0NR00589D ↗
59. Characteristics of carbide-slag-activated GGBS–Fly ash materials: strength, hydration mechanism, microstructure, and sustainability10.1016/j.conbuildmat.2024.135796 ↗
60. Kinetics of phase change. I general theory10.1063/1.1750380 ↗
61. CO2 mineral sequestration with the use of ground granulated blast furnace slag
62. Molecular-scale insights into the leaching of ca ions and carbonate deposition behavior in CSH under carbonation
63. Review on accelerated carbonation of calcium-bearing minerals: carbonation behaviors, reaction kinetics, and carbonation efficiency improvement
64. Multiscale analysis of CO2 adsorption mechanisms on porous carbon: an investigation into the impact of intrinsic defects and pore size10.1016/j.envres.2024.120701 ↗