Experimental study on multisolid waste synergistic regeneration fluid backfill materials
Source abstract
Abstract
This study utilizes soda residue (SR), slag, and phosphogypsum (PG) as components of the cementitious material, with redundant soil (RTS) as the primary raw material. With the target compressive strength of fluid backfill materials ranging from 0.3 to 8.3 MPa, the proportioning is designed by using XRD, SEM, and the trigonometric isoenthalpy diagram design method to study the interaction of multisolid wastes in the cementitious system. The optimal mix proportion is identified as 40–50 % soda residue (SR), 30–50 % slag, and 10–30 % phosphogypsum (PG) for the backfill material. Microstructural analysis reveals that SR and PG provide the necessary SO 4 2- and Cl - for hydration reactions, which react with slag to form C-S-H, AFt, and Friedel's salt (Fs). The interlocking and wrapping interaction among these components enhances the microstructural density of the hydration products, thereby enhancing the compressive strength macroscopically. This study integrates multisolid wastes into a sustainable engineering solution, contributing to the circular economy and waste valorization in the construction industry.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Tailings Management and Properties · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Fresh self-compacting concrete, a shear thickening material10.1016/j.cemconres.2008.02.008 ↗
2. Rapid-hardening controlled low strength materials made of recycled fine aggregate from construction and demolition waste10.1016/j.conbuildmat.2018.04.023 ↗
3. Use of recycled fine aggregates for control low strength materials (CLSMs) production10.1016/j.conbuildmat.2013.02.059 ↗
4. Valorization of fine recycled C&D aggregate and incinerator bottom ash for the preparation of controlled low-strength material (CLSM)10.1016/j.clwas.2022.100061 ↗
5. Evaluation the performance of controlled low strength material made of excess excavated soil10.1016/j.jclepro.2018.12.171 ↗
6. Utilization of excavated soil in coal ash-based controlled low strength material (CLSM)10.1016/j.conbuildmat.2016.07.053 ↗
7. Engineering properties of soil-based controlled low-strength materials as slag partially substitutes to Portland cement10.1016/j.conbuildmat.2013.07.046 ↗
8. Sustainable solutions: transforming waste shield tunnelling soil into geopolymer-based underwater backfills
9. Flowability and density characteristics of controlled low-strength material using native high-plasticity clay10.1061/(ASCE)MT.1943-5533.0001127 ↗
10. Soil-based flowable fill for pipe line construction
11. Performance evaluation of modified marine dredged soil and recycled in-situ soil as controlled low strength materials for underground pipe10.1007/s12205-013-0178-3 ↗
12. Clinker-free cement based on calcined clay, slag, portlandite, anhydrite, and CSH seeding: An SCM-based low-carbon cementitious binder approach]10.1016/j.conbuildmat.2024.137546 ↗
13. Multi-solid waste collaborative production of clinker-free cemented iron tailings backfill material with ultra-low binder-tailing ratio10.1016/j.conbuildmat.2022.130271 ↗
14. Feasibility of using fly ash-slag-based binder for mine backfilling and its associated leaching risks10.1016/j.jhazmat.2020.123191 ↗
15. Investigation on the preparation of low carbon cement materials from industrial solid waste phosphogypsum: clinker preparation, cement properties, and hydration mechanism10.1016/j.jclepro.2024.142203 ↗
16. Study on the construction workability of fluidized waste soil as the backfill material for the sidewalls of foundation pits
17. Preparation and evaluation of high-fluid backfill materials from construction spoil10.1016/j.conbuildmat.2022.128370 ↗
18. Mechanical properties of bentonite soil stabilized with rice husk ash and ground granulated blast furnace slag geopolymer10.1007/s41024-024-00454-y ↗
19. Evaluation of calcium carbide residue and fly ash as sustainable binders for environmentally friendly loess soil stabilization10.1038/s41598-024-51326-x ↗
20. Strength performance of low-bearing-capacity clayey soils stabilized with ladle furnace slag10.1007/s11356-023-29375-y ↗
21. Investigation of geotechnical and microstructure characteristics of gypsum soil using ground granulated blast-furnace slag (GGBS), fly ash, and lime10.1016/j.conbuildmat.2024.135358 ↗
22. The utilization of ammonia soda residue in building materials: a review
23. Synthesis of a novel one-part alkali-activated material from solid wastes salt sludge and soda residue10.1016/j.conbuildmat.2024.138734 ↗
24. Development of phosphogypsum-based full-solid-waste cementitious materials: mechanical properties, hydration mechanisms, and pollutant stabilization mechanisms
25. Preparation and performance of all-solid waste recycled fluid mixture
26. Influence of cementitious material on recycled fluid mixture of construction waste
27. Macro and microscopic characteristics of soft soil stabilized by Portland cement-soda residue under dry-wet cycling10.1016/j.conbuildmat.2024.136347 ↗
28. Ministry of Housing and Urban-Rural Development of the People's Republic of China · 2010
29. ASTM International · 2017
30. Ministry of Housing and Urban-Rural Development of the People's Republic of China · 2009
31. Ministry of Transport of the People's Republic of China · 2009
32. Ministry of Industry and Information Technology of the People's Republic of China · 2014
33. Study on mix proportion parameters of solidified soil prepared from construction waste soil
34. Strength test and reinforcement mechanism of gangue-building solid waste-based cement filling material improved by soda residue10.1016/j.jclepro.2024.143453 ↗
35. A novel all-solid-waste binder prepared by salt-alkali synergistic activation system constructed from phosphogypsum, soda residue and calcium carbide slag
36. Utilizing phosphogypsum waste to improve the mechanical and durability performances of cement-free structural mortar containing ground granulated blast furnace slag and calcium oxide
37. Capillary water absorption performance and damage constitutive model of recycled concrete under freeze-thaw action10.1016/j.conbuildmat.2022.129120 ↗
38. The role of CO2 in MSWI fly ash-slag-based binder at the early stage10.1016/j.conbuildmat.2023.133601 ↗
39. Effect of alkali hydroxide on calcium silicate hydrate (C-S-H)
40. A comprehensive review of cementitious composites modified with nano silica: fabrication, microstructures, properties and applications10.1016/j.conbuildmat.2023.133922 ↗
41. Synergy of inert granite powder and active mineral admixture in manufactured sand mortar: the effect on mechanical properties, chloride permeability and water absorption properties10.1016/j.conbuildmat.2023.133660 ↗
42. Comparison of red mud and coal gangue blended geopolymers synthesized through thermal activation and mechanical grinding preactivation10.1016/j.conbuildmat.2017.07.045 ↗
43. Impact of Mg substitution on the structure and pozzolanic reactivity of calcium aluminosilicate (CaO-Al2O3-SiO2) glasses10.1016/j.cemconres.2020.106231 ↗
44. Cemented backfill using Ca(OH)2-pretreated phosphogypsum as aggregate: hydration characteristics, structural features and strength development10.1016/j.conbuildmat.2023.133011 ↗
45. Cementitous material based stabilization of soft soils by stabilizer: feasibility and durabiliy assessment10.1016/j.conbuildmat.2024.136046 ↗
46. Effects of active waste powder obtained from C&D waste on the microproperties and water permeability of concrete10.1016/j.jclepro.2020.120518 ↗
47. Quantification of the net slurry and phase's association in fine recycled aggregates by SEM-based image analysis10.1016/j.conbuildmat.2021.126206 ↗
48. Microstructure and composition of hardened paste of soda residue-slag complex binding material10.3389/fmats.2019.00211 ↗
49. Study of chloride binding and diffusion in GGBS concrete10.1016/S0008-8846(02)00712-3 ↗
50. Enhancing interlayer bonding strength of 3D printed ternary geopolymer using calcium carbonate whiskers spray10.1016/j.conbuildmat.2024.136725 ↗
51. Effects of seawater on the formation and mechanical properties of Friedel's salt associated with tricalcium aluminate10.1016/j.cemconres.2023.107340 ↗
52. Under-standing the adhesion mechanisms between C S H and fillers10.1016/j.cemconres.2017.07.006 ↗
53. Hydration properties of basic oxygen furnace steel slag10.1016/j.conbuildmat.2009.12.028 ↗
54. Hydration mechanism and orthogonal optimization of mix proportion for steel slag-slag-based clinker-free prefabricated concrete10.1016/j.conbuildmat.2019.117036 ↗
55. Ammonia-soda residue and metallurgical slags from iron and steel industries as cementitious materials for clinker-free concretes10.1016/j.jclepro.2021.127262 ↗
56. The effects of hardening accelerator on microstructure and mechanical performance of fly ash-cement-based materials using response surface methodology
57. Hydration behavior of mixtures of cement and fly ash with high sulphate and chloride content10.1023/A:1010198224297 ↗
58. Comparative and semi-quantitative XRD analysis of Friedel’s’s salt originating from pozzolan and Portland cement10.1016/j.conbuildmat.2010.11.037 ↗
59. A novel early strength agent prepared by wet-grinding concrete waste slurry and its effect on early hydration and mechanical properties of cement based materials