journal article·2025-07Open access

Characterization and modification mechanism of recycled silty clay slurry as a shield slag conditioner: Macroscopic, mesoscopic, and microscopic multiscale analysis

Keqi Liu, Pengxi Lu, Wen Zhao, Shuhong Wang

Abstract

The large amount of slag generated during the construction of earth pressure balance shield (EPBS) not only incurs significant disposal costs, but also exacerbates environmental pollution. To improve the utilization of the shield slag, silty clay with additive is proposed as a slag conditioner instead of bentonite. Firstly, various macroscopic properties of the bentonite and silty clay slurries are tested. Subsequently, the relationships between the macroscopic properties of the silty clay slurries containing additives and the modification mechanism are evaluated at microscopic, mesoscopic, and macroscopic scales by using infrared spectroscopy (IR), scanning electron microscope (SEM), and Zeta potential tests, respectively. Based on these tests, reasons for variations in modification effects of different slurries are identified. The results show that addition of 3 % sodium carbonate to the silty clay can effectively improve the rheological properties of the slurry. The modification mechanism of sodium carbonate involves the formation of hydrogen bonds between water molecules and inner surface hydroxyl groups within the lattice layer of kaolinite. This process significantly enhances the rheological properties of the silty clay slurry. Furthermore, sodium carbonate alters the contact relationships between the silty clay particles, which increases viscosity and reduces permeability of the slurry. Finally, sodium carbonate increases thickness of the electrical double layer of the silty clay particles. This allows the particles to bind more water molecules, therefore improving slurry-making capacity of the silty clay. This paper presents an innovative multiscale analysis of the modification process of silty clay. The substitution of recycled silty clay for bentonite as a slag conditioner not only substantially reduces the cost of purchasing materials, but also considerably decreases the expenses associated with transportation and disposal of the soil discharged by EPBS. • The fluid loss, pH, colloidal rate, funnel viscosity and rheological properties of the modified silty clay slurry are clarified. • The optimal mixing ratio for the silty clay slurry modified with sodium carbonate is 3 %. • The modification mechanism of silty clay slurry by sodium carbonate is analyzed at multiple scales.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Tailings Management and Properties · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Upper bound analysis of longitudinally inclined EPB shield tunnel face stability in dense sand strata10.1016/j.trgeo.2023.101031 ↗
2. Filter cake formation for slurry shield tunneling in highly permeable sand10.1016/j.tust.2013.07.024 ↗
3. Earth pressure balance tunnelling in rock masses: laboratory feasibility study of the conditioning process10.1016/j.tust.2012.11.006 ↗
4. Auxiliary air pressure balance mode for EPB shield tunneling in water-rich gravelly sand strata: feasibility and soil conditioning
5. Experimental study of salt-resisting slurry for undersea shield tunnelling10.1016/j.tust.2020.103322 ↗
6. Effect of foam conditioning on performance of EPB shield tunnelling through laboratory excavation test10.1016/j.trgeo.2021.100692 ↗
7. Dispersant for reducing mud cakes of slurry shield tunnel boring machine in sticky ground10.1155/2021/5524489 ↗
8. Recycling waste sand from slurry shield tunneling: a sustainable filter aid for waste slurry dehydration10.1016/j.jclepro.2022.135387 ↗
9. Study on resourceful treatment and carbon reduction intensity of metro shield slag: an example of a tunnel interval of Shenzhen line 1310.3390/buildings13112816 ↗
10. Can fossil energy make a soft landing?— the carbon-neutral pathway in China accompanying CCS10.1016/j.enpol.2023.113440 ↗
11. Reuse of abandoned shield residues stabilized by a sustainable binder: assessment of strength, durability, and environmental properties10.3390/buildings13030738 ↗
12. Reuse of EPB mucking for concrete production: a laboratory test campaign
13. Preliminary study on preparation of unfired bricks using filter cake from tunnel muck
14. A state-of-art review on development and progress of backfill grouting materials for shield tunneling
15. Mechanical properties and microstructure of SWGA-BF improved rock muck discharged from slurry shield tunnels10.1016/j.conbuildmat.2023.133969 ↗
16. A literature review on properties and applications of grouts for shield tunnel10.1016/j.conbuildmat.2019.117782 ↗
17. Development and experimental study on environmental slurry for slurry shield tunneling10.1016/j.conbuildmat.2019.04.265 ↗
18. Experimental study of the influence of excavation surface stability and sand flowability caused by dense slurry–earth pressure balance shield tunneling in silty sand stratum
19. A new soil conditioner for highly permeable sandy gravel stratum in EPBs10.3390/app11052109 ↗
20. Conditioning experiment on sand and cobble soil for shield tunneling10.1016/j.tust.2019.02.011 ↗
21. Experimental study on the workability of sands conditioned with bentonite-silty clay modified slurry10.1016/j.conbuildmat.2024.137352 ↗
22. Research on optimizing performance of new slurries for EPBS soil conditioning based on response surface method10.1016/j.conbuildmat.2023.130818 ↗
23. Recycling the discharged soil from EPBS tunnels as a soil conditioner and its rheological behaviors10.1016/j.jclepro.2023.138224 ↗
24. Investigation into the pregelatinized starch additive alleviated the deterioration in rheological properties of slurries induced by high-temperature environment and seawater intrusion during submarine slurry shield tunneling10.1016/j.tust.2024.105693 ↗
25. Numerical simulation study on impact factors to dynamic filtration loss10.1007/s13202-023-01723-1 ↗
26. Fabrication and analysis of an effective composite desiccant for the rapid dehydration of shield waste slurry10.1007/s12205-023-0129-6 ↗
27. Apparent viscosity prediction of water-based muds using empirical correlation and an artificial neural network10.3390/en12163067 ↗
28. Experimental study on rheological behaviors of Na-bentonite slurries under seawater intrusion10.1016/j.conbuildmat.2022.129369 ↗
29. Role of montmorillonite, kaolinite, or illite in pyrite flotation: differences in clay behavior based on their structures10.1021/acs.langmuir.0c02073 ↗
30. Investigation on the co-modification process of montmorillonite by anionic and cationic surfactants10.1016/j.clay.2016.08.025 ↗
31. Upgrading calcium bentonite to sodium bentonite using seawater and soda ash10.1021/acs.energyfuels.9b02900 ↗
32. Self-assembly processes in hydrated montmorillonite by FTIR investigations10.3390/ma13051100 ↗
33. Fourier transform infrared spectroscopy analysis for hydrothermal transformation of microcrystalline cellulose on montmorillonite10.1016/j.clay.2014.03.014 ↗
34. Influence of two-stage dosing on flocculation and settlement of kaolinite and associated mechanisms10.1080/08827508.2024.2312526 ↗
35. Spectroscopic, Hartree-Fock and DFT study of the molecular structure and electronic properties of functionalized chitosan and chitosan-graphene oxide for electronic applications10.1007/s11082-023-05978-0 ↗
36. Effect of inorganic salt contaminants on the dissolution of kaolinite basal surfaces in alkali media: a molecular dynamics study10.1021/acs.jpcc.7b12581 ↗
37. Promoting X-ray scattering data analysis with two-dimensional correlation spectroscopy10.1107/S1600576723008415 ↗
38. Effect of calcium ions on bentonite network structure10.1016/j.mineng.2022.107724 ↗
39. Elevated temperature effects (T > 100 °C) on the interfacial water and microstructure swelling of Na-montmorillonite10.1016/j.cej.2024.148647 ↗
40. Experimental study on property change of slurry and filter cake of slurry shield under seawater intrusion10.1016/j.tust.2019.03.006 ↗
41. Changes of atterberg limits and electrochemical behaviors of clays with dispersants as conditioning agents for EPB shield tunnelling10.1016/j.tust.2017.12.026 ↗
42. Geochemical investigation of electrical conductivity and electrical double layer based wettability alteration during engineered water injection in carbonates10.1016/j.petrol.2022.110627 ↗
43. Empirical formulae for electric double-layer repulsion between two arbitrarily inclined clay particles10.1016/j.jrmge.2018.08.005 ↗
44. Classification and physical characteristics of bound water in loess and its main clay minerals10.1016/j.enggeo.2019.105394 ↗
45. Time dependent stress–strain behavior of bentonite slurries; effect of thixotropy10.1016/j.powtec.2015.12.036 ↗
46. Shear-induced flocculation of a suspension of kaolinite as function of pH and salt concentration10.1016/j.jcis.2009.03.044 ↗