journal article·2022-06Open access

Different electrical voltage responses of cement composites under forward and backward current directions

Min Kyoung Kim, Seyoon Yoon, Dong Joo Kim

Abstract

This study investigates the effect of input current direction on the electrical voltages of ultra-high-performance concrete containing fine steel slag aggregates (UA). For the application of electrical impedance tomography based on Laplace’s equation, electrical voltage should be identical under different input current directions. However, the electrical voltages of UA differ significantly corresponding to forward and backward current directions. The percentage differences of real voltages (VRE¯) corresponding to different input current directions are between 4.57% and 76.39% under different boundary conditions such as Wenner, same-boundary, and opposite-boundary conditions. VRE¯ originates from a different internal resistance of the internal path (Rip) corresponding to the input current direction. Among the investigated boundary conditions, the Wenner boundary condition provides the lowest VRE¯ because it leads to the generation of an almost uniform current density between the two inner probes used for measuring voltages than other conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Smart Materials for Construction · Electrical and Bioimpedance Tomography · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Chang · 1999
2. A. Gastineau, T. Johnson, A. Schultz, Bridge Health Monitoring and Inspections-A Survey of Methods, Minnesota Department of Transportation, 2009.
3. Han · 2014
4. Random forest-based evaluation technique for internal damage in reinforced concrete featuring multiple nondestructive testing results10.1016/j.conbuildmat.2020.119238 ↗
5. Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements10.1002/maco.19780290804 ↗
6. Corrosion behavior of steel bar embedded in fly ash concrete10.1016/j.corsci.2005.05.019 ↗
7. Determination of chloride diffusion coefficient of concrete using open-circuit potential measurements10.1016/j.cemconres.2003.09.024 ↗
8. Monitoring reinforcement corrosion and corrosion-induced cracking using non-destructive x-ray attenuation measurements10.1016/j.cemconres.2011.06.006 ↗
9. Nondestructive corrosion detection in RC through integrated heat induction and IR thermography10.1007/s10921-012-0133-0 ↗
10. D.J. Collins, Damage Detection in Composite Materials Using Acoustic Emission and Self-Sensing Fibers, The University of Birmingham, 2009.
11. Crack classification in concrete based on acoustic emission10.1016/j.conbuildmat.2010.05.004 ↗
12. Z.Q. Chen, Reconstruction Algorithms for Electrical Impedance Tomography, 1990.
13. W. Daily, A. Ramirez, A. Binley, S. Henry-Poulter, Electrical Resistance Tomography of Concrete Structures, Lawrence Livermore National Lab., CA, United States, 1993.
14. T.C. Hou, J.P. Lynch, Tomography imaging of crack damage in cementitious structural composites, in: Proceedings of the 4th International Conference on Earthquake Engineering, Taipei, Taiwan, 12–13 October 2006.
15. Electrical impedance tomographic methods for sensing strain fields and crack damage in cementitious structures10.1177/1045389X08096052 ↗
16. Electrical resistance tomography imaging of concrete10.1016/j.cemconres.2009.08.023 ↗
17. Electrical impedance tomography-based sensing skin for quantitative imaging of damage in concrete10.1088/0964-1726/23/8/085001 ↗
18. A new sensing skin for qualitative damage detection in concrete elements: rapid difference imaging with electrical resistance tomography10.1016/j.ndteint.2014.07.006 ↗
19. Self-sensing concrete enabled by nano-engineered cement-aggregate interfaces10.1177/1475921716643867 ↗
20. A functionally layered sensing skin for the detection of corrosive elements and cracking10.1177/1475921716670574 ↗
21. Detection and reconstruction of complex structural cracking patterns with electrical imaging10.1016/j.ndteint.2018.06.004 ↗
22. D.L. Nguyen, J. Song, C. Manathamsombat, D.J. Kim, Comparative electromechanical damage-sensing behaviors of six strain-hardening steel fiber-reinforced cementitious composites under direct tension. Compos. B Eng., 69, 2015, pp. 159–168. 〈https://doi.org/10.1016/j.compositesb.2014.09.037〉.10.1016/j.compositesb.2014.09.037 ↗
23. Effect of fiber volume content on electromechanical behavior of strain-hardening steel-fiber-reinforced cementitious composites10.1177/0021998314568169 ↗
24. Characterizing the electro-mechanical response of self-sensing steel-fiber-reinforced cementitious composites10.1016/j.conbuildmat.2019.117954 ↗
25. Suitability of a PXI platform for an electrical impedance tomography system
26. A.D. Seagar, Probing with Low Frequency Electric Current (Ph.D. thesis), University of Canterbury, Christchurch, New Zealand, 1983.
27. Theoretical limits to sensitivity and resolution in impedance imaging10.1088/0143-0815/8/4A/003 ↗
28. ACI Committee, 234, Guide for the Use of Silica Fume in Concrete (ACI 234R-96), American Concrete Institute (ACI), Michigan, (Reapproved, 2000), 1996, p. 51.
29. S.Y. Yoon, D. Jeon, J.E. Oh, H.Y. Woo, M.K. Kim, D.J. Kim, Experimentally validated analytical solutions to homogeneous problems of electrical impedance tomography (EIT) on rectangular cement-based materials, Autom. Constr., 2021.10.3390/app13010335 ↗
30. Piezoresistive/piezoelectric intrinsic sensing properties of carbon nanotube cement-based smart composite and its electromechanical sensing mechanisms: a review10.1515/ntrev-2021-0112 ↗
31. Multifunctional layer-by-later carbon nanotube-polyelectrolyte thin films for strain and corrosion sensing10.1088/0964-1726/16/2/022 ↗
32. AC-impedance response of multi-walled carbon nanotube/cement composites10.1016/j.cemconcomp.2006.01.014 ↗
33. Influences of multi-walled carbon nanotube (MCNT) fraction, moisture, stress/strain level on the electrical properties of MCNT cement-based composites10.1016/j.sna.2018.08.010 ↗
34. Static and dynamic strain monitoring of reinforced concrete components through embedded carbon nanotube cement-based sensors10.1155/2017/3648403 ↗
35. T.R. Kuphaldt, Lessons in Electric Circuits, Vol. 1, Open Book Project, Design Science License, District of Columbia, 2007.
36. T.R. Kuphaldt, Lessons in Electric Circuits, Vol. 2, Open Book Project, Design Science License, AC, 2007.
37. Enhanced lumped circuit model for smart nanocomposite cement-based sensors under dynamic compressive loading conditions10.1016/j.sna.2017.04.004 ↗