journal article·2025-12Open access

Steel fiber-reinforced slag-based concretes for floats of FOWTs – The case of a slab as a preliminary approach: design, durability under chloride exposure and Life Cycle Assessment

Nicolas Reuge, Stéphanie Bonnet, Laurence Guihéneuf, Olivier Cornet, Anne Ventura

Abstract

Concrete Floating wind turbine is a solution of the future for Marine Renewable Energies (MRE). The B2FE project, i.e., steel fiber-reinforced concrete (SFRC) for wind turbine floats, aims at developing and characterizing a slag-based concrete (low-carbon concrete) reinforced with steel fibers (slag-based SFRC). Four concrete formulations composed of 50 % CEM I and 50 % blast furnace slag , including fiber contents of 0 (i.e., no fiber), 20, 40 and 60 kg.m −3 , are studied. A simplified case study is investigated by considering a slab under the same exposure conditions as a FOWT . Considering given mechanical requirements (distributed load of 100 kPa, i.e. 10 t.m −2 ), the dimensioning of the slab is carried out with, on one hand, the slag-based RC solution (no fiber) and on the other hand, the three SFRC formulations (no rebar). Compared to steel bar reinforcements, it appears that steel fibers can provide similar mechanical properties with fewer concrete or steel which is a very interesting result. Then, knowing the physicochemical properties of the materials, simulations of chloride ions transport in the slab subjected to sea water tidal conditions (known as much "aggressive" as splashing) are performed to estimate the service life of these solutions: they appear to be around 30 years, which meet the expectations. Finally, a cradle-to-gate Life Cycle Analysis (LCA) demonstrates a clear advantage of fiber-reinforced formulations, by reducing carbon footprint and other indicators of environmental impacts. In terms of service life and carbon footprint, an innovative cross-analysis leads to an optimal steel fiber content of 40 kg.m −3 .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Modelling of convection, diffusion and binding of chlorides in concrete during wetting-drying cycles
2. Analysis of corrosion risk due to chloride diffusion for concrete structures in marine environment
3. Aggregate size effects on the mechanical behaviour and on the gas permeability at damaged state of cement-based materials with and without slag10.1080/19648189.2021.1915881 ↗
4. New approach for coupled chloride/moisture transport in non-saturated concrete with and without slag10.1016/j.conbuildmat.2012.04.106 ↗
5. Effect of mineral admixtures and aggregate natures on the behavior of high performance concrete
6. Electrical resistivity tomography results analyzed with two inversion methods to determine chloride profiles on BFS concrete having very high electrical resistivity10.1016/j.conbuildmat.2023.133361 ↗
7. W.A. Elsaigh, E.P. Kearsley, J.M. Robberts, Steel reinforced concrete for road pavement applications. Proceedings of the 24th Southern African Transport Conference. Pretoria, South Africa, 11-13 July 2005. ISBN: 1-920-01712-7.
8. Durability of slag waste incorporated steel fiber-reinforced concrete in marine environment
9. Permeability of cracked hybrid fiber reinforced mortar under load
10. Permeability of cracked steel fiber-reinforced concrete10.1061/(ASCE)0899-1561(2002)14:4(355) ↗
11. Permeability of cracked fibre-reinforced concrete
12. Effect of hooked end steel fibers on strength and durability properties of ambient cured geopolymer concrete
13. Engineering properties of ambient cured alkali-activated fly ash–slag concrete reinforced with different types of steel fiber10.1061/(ASCE)MT.1943-5533.0002333 ↗
14. Durability performance of hybrid reinforced concretes (steel fiber + polyolefin fiber) in a harsh marine tidal zone of Persian Gulf
15. Model Code 2010, 2010. fib Bulletin No. 55, First complete draft, Volume 1. https://doi.org/10.35789/fib.BULL.0055.10.35789/fib.BULL.0055 ↗
16. Fiber-reinforced concrete and its life cycle assessment: a systematic review
17. Assessment of the sustainability of fibre-reinforced concrete by considering both environmental and mechanical properties10.3390/su14106347 ↗
18. Decarbonization potential of steel fibre-reinforced limestone calcined clay cement concrete one-way slabs10.1016/j.conbuildmat.2024.136847 ↗
19. Life cycle assessment of steel fibre-reinforced concrete beams10.1080/23311916.2024.2374942 ↗
20. N. Reuge, S. Bonnet, F. Bignonnet, Durability indicators of slag-based concrete reinforced by steel fibers: experimental study and multiscale modeling. Submitted to Eur. J. Environ. Civ. En. 2025, revised version under review.Preprint available online: 〈https://hal.science/hal-04894736〉.10.1080/19648189.2025.2532800 ↗
21. Design of concrete: setting a new basis for improving both durability and environmental performance10.1111/jiec.13059 ↗
22. Durability requirements for reinforced concrete construction in aggressive marine environments10.1016/0951-8339(90)90013-H ↗
23. Numerical and experimental investigation of coupled capillary suction and chloride penetration in unsaturated concrete under cyclic drying-wetting condition
24. An analytical solution of a finite domain convection-diffusion model for chloride intrusion into RC seawall10.1016/j.apor.2021.103002 ↗
25. Critical chloride content in reinforced concrete – a review10.1016/j.cemconres.2009.08.006 ↗
26. Skin effect of chloride ingress in marine concrete: a review on the convection zone10.1016/j.conbuildmat.2020.120566 ↗
27. NF EN 15804, 2012. Contribution des ouvrages de construction au développement durable - Déclarations environnementales sur les produits - Règles régissant les catégories de produits de construction. Afnor editions.
28. Influence of steel fiber size, shape, and strength on the quasi-static properties of ultra-high performance concrete: experimental investigation and numerical modeling10.1016/j.conbuildmat.2021.123532 ↗
29. EN 1992-1-1 Eurocode 2, 2005. Design of concrete structure – Part 1.1 General rules and rules for buildings. European Standard Organization.
30. Dramix Pro® Slab on Ground, 2018. 〈https://fr.scribd.com/document/393669080/slab-on-floor〉.
31. Modélisation du séchage des bétons analyse des différents modes de transfert hydrique
32. N. Reuge, F. Bignonnet, S. Bonnet S.. Transport des ions chlorure dans les bétons soumis au marnage: validation d’un modèle physicochimique simplifié. CFGC AJCE 2023 conference, 2023, Paris, France. http://dx.doi.org/10.26168/ajce.41.1.20.
33. Influence of carbonation on ionic transport in unsaturated concrete: evolution of porosity and prediction of service life10.1080/19648189.2018.1455609 ↗
34. Modélisation du transport multi-espèces dans les matériaux cimentaires saturés ou non saturés et éventuellement carbonatés. Ph.D. thesis
35. A closed-form equation for predicting the hydraulic conductivity of unsatured soils10.2136/sssaj1980.03615995004400050002x ↗
36. Modèles de diffusion non-linéaires en milieux poreux – application à la dissolution et au séchage des matériaux cimentaires. PhD. thesis
37. Assessment of liquid water and gas permeabilities of partially saturated ordinary concrete10.1016/j.conbuildmat.2014.04.137 ↗
38. Combination of the wenner resistivimeter and torrent permeameter methods for assessing carbonation depth and saturation level of concrete10.1016/j.conbuildmat.2018.07.151 ↗
39. Modelling of isothermal coupled moisture–ion transport in cementitious materials10.1016/j.cemconres.2011.04.001 ↗
40. Effect of uniaxial compressive loading on gas permeability and chloride diffusion coefficient of concrete and their relationship10.1016/j.cemconres.2013.05.013 ↗
41. Measuring chloride diffusion coefficients from non-steady state diffusion tests10.1016/S0008-8846(98)00070-2 ↗
42. C. Gelhen, M. Bartholomew, C. Edvardsen, M. Ferreira, S. von Greve-Dierfeld, J. Gulikers J. et al., Fib 76 bulletin. Technical report, 2015. Fédération internationale du béton (fib). ISSN 1562-3610. ISBN 978-2-88394-116-8. 〈https://www.afgc.asso.fr/app/uploads/2010/07/fib_Bulletin_76.pdf〉.
43. Model Life-365, The Life-365 Consortium. 〈https://www.life-365.org〉.
44. Prediction of moisture transfer in cement-based materials: Use of a porous network model to access transfer parameters10.1016/j.cemconres.2020.106310 ↗
45. Sensitivity analysis of a physicochemical model of chloride ingress into real concrete structures subjected to long-term exposure to tidal cycles10.1016/j.apor.2023.103622 ↗
46. Monitoring of drying and imbibition of concrete using embedded resistivity sensors for the estimation of permeability
47. NF EN 16757, 2017. Contribution des ouvrages de construction au développement durable - Déclarations environnementales sur les produits - Règles régissant la catégorie de produits pour le béton et les éléments en béton. Afnor editions.
48. Electrochemical corrosion monitoring of steel fiber embedded in cement based composites10.1016/j.cemconcomp.2017.08.004 ↗
49. El-Reedy · 2020
50. DNV Standards & Guidelines: DNV-ST-0119 Floating wind turbine structures, 2021.〈https://www.dnv.com/energy/standards-guidelines/dnv-st-0119-floating-wind-turbine-structures〉.